Kconfig: Remove all default n/no options

Similar change was done by commit b4c2c151b1 ("Kconfig: Remove all
default n/no options") and again sync is required.

default n/no doesn't need to be specified. It is default option anyway.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # tegra
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Angelo Dureghello <angelo@kernel-space.org>
This commit is contained in:
Michal Simek 2023-10-25 09:25:37 +02:00 committed by Tom Rini
parent 54024c8021
commit 18370f1497
21 changed files with 0 additions and 29 deletions

View file

@ -54,7 +54,6 @@ config SYS_SOC
config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT
bool "Force minimal current draw from VDD5V by MX28 PMU"
default n
help
After setting this option, the current drawn from VDD5V
by the PMU is reduced to zero - the DCDC_BATT is used as
@ -62,7 +61,6 @@ config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT
config SPL_MXS_PMU_DISABLE_BATT_CHARGE
bool "Disable Battery Charging in MX28 PMU"
default n
config SPL_MXS_PMU_ENABLE_4P2_LINEAR_REGULATOR
bool "Enable the 4P2 linear regulator in MX28 PMU"

View file

@ -450,7 +450,6 @@ config ROCKCHIP_BOOT_MODE_REG
config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON
bool "Disable device boot on power plug-in"
depends on PMIC_RK8XX
default n
---help---
Say Y here to prevent the device from booting up because of a plug-in
event. When set, the device will boot briefly to determine why it was

View file

@ -14,7 +14,6 @@ config SPL_SYS_MALLOC_F_LEN
config SDM845
bool "Qualcomm Snapdragon 845 SoC"
default n
select LINUX_KERNEL_IMAGE_HEADER
config LNX_KRNL_IMG_TEXT_OFFSET_BASE

View file

@ -811,7 +811,6 @@ config AXP_GPIO
config AXP_DISABLE_BOOT_ON_POWERON
bool "Disable device boot on power plug-in"
depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER
default n
---help---
Say Y here to prevent the device from booting up because of a plug-in
event. When set, the device will boot into the SPL briefly to

View file

@ -18,7 +18,6 @@ config TEGRA_CLKRST
config TEGRA_CRYPTO
bool "Tegra AES128 crypto module"
select AES
default n
config TEGRA_GP_PADCTRL
bool

View file

@ -200,7 +200,6 @@ source "board/sysam/stmark2/Kconfig"
config M68K_QEMU
bool "Build with workarounds for incomplete QEMU emulation"
default n
help
QEMU 8.x currently does not implement RAMBAR accesses and
DMA timers. Enable this option for U-Boot CI purposes only

View file

@ -68,7 +68,6 @@ config SPL_SYS_DCACHE_OFF
config SPL_ZERO_MEM_BEFORE_USE
bool "Zero memory before use"
depends on SPL
default n
help
Zero stack/GD/malloc area in SPL before using them, this is needed for
Sifive core devices that uses L2 cache to store SPL.

View file

@ -12,11 +12,9 @@ config SYS_CONFIG_NAME
config GROUPER_TPS65911
bool "Enable support TI TPS65911 PMIC"
select CMD_POWEROFF
default n
config GROUPER_MAX77663
bool "Enable support MAXIM MAX77663 PMIC"
select CMD_POWEROFF
default n
endif

View file

@ -14,7 +14,6 @@ config TRANSFORMER_SPI_BOOT
select TEGRA20_SLINK
select DM_SPI_FLASH
select SPI_FLASH_WINBOND
default n
help
Tegra 3 based Transformers with Windows RT have core
boot sequence (BCT and EBT) on separate SPI FLASH

View file

@ -125,7 +125,6 @@ config SYS_IVM_EEPROM_PAGE_LEN
config PG_WCOM_UBOOT_UPDATE_SUPPORTED
bool "Enable U-Boot Field Fail-Safe Update Functionality"
select EVENT
default n
help
Indicates that field fail-safe u-boot update is supported.
This functionality works only for designs that are booting
@ -133,7 +132,6 @@ config PG_WCOM_UBOOT_UPDATE_SUPPORTED
config PG_WCOM_UBOOT_BOOTPACKAGE
bool "U-Boot Is Part Of Factory Boot-Package Image"
default n
help
Indicates that u-boot will be a part of the factory programmed
boot-package image.
@ -149,7 +147,6 @@ config PG_WCOM_UBOOT_UPDATE_TEXT_BASE
config PG_WCOM_UBOOT_UPDATE
bool "U-Boot Is Part Of Factory Boot-Package Image"
default n
help
Indicates that u-boot will be a part of the embedded software and
programmed at field.

View file

@ -11,14 +11,12 @@ config SYS_CONFIG_NAME
config DEVICE_P880
bool "Enable support for LG Optimus 4X HD"
default n
help
LG Optimus 4X HD derives from x3 board but has slight
differences.
config DEVICE_P895
bool "Enable support for LG Optimus Vu"
default n
help
LG Optimus Vu derives from x3 board but has slight
differences.

View file

@ -246,7 +246,6 @@ config CMD_BOOTM_PRE_LOAD
bool "enable pre-load on bootm"
depends on CMD_BOOTM
depends on IMAGE_PRE_LOAD
default n
help
Enable support of stage pre-load for the bootm command.
This stage allow to check or modify the image provided
@ -2360,7 +2359,6 @@ config CMD_VIDCONSOLE
config CMD_SELECT_FONT
bool "select font size"
depends on VIDEO
default n
help
Enabling this will provide 'font' command.
Allows font selection at runtime.
@ -2880,7 +2878,6 @@ config CMD_UBIFS
config MMC_SPEED_MODE_SET
bool "set speed mode using mmc command"
depends on CMD_MMC
default n
help
Enable setting speed mode using mmc rescan and mmc dev commands.
The speed mode is provided as the last argument in these commands

View file

@ -77,7 +77,6 @@ endif
config FSL_DCP_RNG
bool "Enable Random Number Generator support"
depends on DM_RNG
default n
help
Enable support for the hardware based random number generator
module of the DCP. It uses the True Random Number Generator (TRNG)

View file

@ -61,7 +61,6 @@ config TI_GPMC
if TI_GPMC
config TI_GPMC_DEBUG
bool "Debug Texas Instruments GPMC timings"
default n
help
Enable this to print GPMC timings before and after the GPMC registers
are programmed. This should not be left enabled on production systems.

View file

@ -375,7 +375,6 @@ config SPL_MXC_OCOTP
config NPCM_OTP
bool "Nnvoton NPCM BMC On-Chip OTP Memory Support"
depends on (ARM && ARCH_NPCM)
default n
help
Support NPCM BMC OTP memory (fuse).
To compile this driver as a module, choose M here: the module

View file

@ -614,7 +614,6 @@ config ROCKCHIP_NAND
config ROCKCHIP_NAND_SKIP_BBTSCAN
bool "Skip the automatic BBT scan with Rockchip NAND controllers"
depends on ROCKCHIP_NAND
default n
help
Skip the automatic BBT scan with the NAND_SKIP_BBTSCAN
option when data content is not in MTD format or

View file

@ -107,7 +107,6 @@ config SPI_FLASH_SMART_HWCAPS
config SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT
bool "Command extension type is INVERT for Software Reset on boot"
default n
help
Because of SFDP information can not be get before boot.
So define command extension type is INVERT when Software Reset on boot only.

View file

@ -4,6 +4,5 @@ config SM
config MESON_SM
bool "Amlogic Secure Monitor driver"
select SM
default n
help
Say y here to enable the Amlogic secure monitor driver.

View file

@ -460,7 +460,6 @@ config SANDBOX_SPI_MAX_CS
config SPI_ASPEED_SMC
bool "ASPEED SPI flash controller driver"
depends on DM_SPI && SPI_MEM
default n
help
Enable ASPEED SPI flash controller driver for AST2500
and AST2600 SoCs.

View file

@ -231,7 +231,6 @@ config USB_EHCI_MXS
config USB_EHCI_NPCM
bool "Support for Nuvoton NPCM on-chip EHCI USB controller"
depends on ARCH_NPCM
default n
---help---
Enables support for the on-chip EHCI controller on
Nuvoton NPCM chips.
@ -368,7 +367,6 @@ config USB_OHCI_DA8XX
config USB_OHCI_NPCM
bool "Support for Nuvoton NPCM on-chip OHCI USB controller"
depends on ARCH_NPCM
default n
---help---
Enables support for the on-chip OHCI controller on
Nuvoton NPCM chips.

View file

@ -8,7 +8,6 @@ config UBIFS_SILENCE_MSG
config UBIFS_SILENCE_DEBUG_DUMP
bool "UBIFS silence debug dumps"
default y if UBIFS_SILENCE_MSG
default n
help
Make the debug dumps from UBIFS stop printing.
This decreases size of U-Boot binary.