ARM: MediaTek: Add support for MediaTek MT8518 SoC

Add support for MediaTek MT8518 SoC. This include the file
that will initialize the SoC after boot and its device tree.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>

arch/arm/dts/mt8518.dtsi

@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt8518-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt8518";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+
+
+	topckgen: clock-controller@10000000 {
+		compatible = "mediatek,mt8518-topckgen";
+		reg = <0x10000000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@0c000000 {
+		 compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0xc000000 0x40000>,	/* GICD */
+			  <0xc100000 0x200000>; /* GICR */
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	sysirq: interrupt-controller@10200a80 {
+		compatible = "mediatek,sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200a80 0x50>;
+	};
+
+	timer0: apxgpt@10008000 {
+		compatible = "mediatek,timer";
+		reg = <0x10008000 0x1000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_CLK26M_D2>,
+			 <&topckgen CLK_TOP_CLK32K>,
+			 <&topckgen CLK_TOP_APXGPT>;
+		clock-names = "clk13m",
+			 "clk32k",
+			 "bus";
+	};
+
+	watchdog0: watchdog@10007000 {
+		compatible = "mediatek,wdt";
+		reg = <0x10007000 0x1000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_FALLING>;
+		#reset-cells = <1>;
+		status = "disabled";
+		timeout-sec = <60>;
+		reset-on-timeout;
+	};
+
+
+
+	mmc0: mmc@11120000 {
+		compatible = "mediatek,mt8516-mmc";
+		reg = <0x11120000 0x1000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_MSDC0>,
+			<&topckgen CLK_TOP_MSDC0>,
+			<&topckgen CLK_TOP_MSDC0_B>;
+		clock-names = "source", "hclk", "source_cg";
+		status = "disabled";
+	};
+
+	uart0: serial@11005000 {
+		compatible = "mediatek,hsuart";
+		reg = <0x11005000 0x1000>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART0_SEL>,
+			<&topckgen CLK_TOP_UART0>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+};

arch/arm/mach-mediatek/Kconfig

@@ -38,6 +38,15 @@ config TARGET_MT8516
 	  Ethernet, IR TX/RX, I2C, I2S, S/PDIF, and built-in Wi-Fi / Bluetooth combo
 	  chip and several DDR3 and DDR4 options.
 
+config TARGET_MT8518
+	bool "MediaTek MT8518 SoC"
+	select ARM64
+	help
+	  The MediaTek MT8518 is a ARM64-based SoC with a quad-core Cortex-A53.
+	  including UART, SPI, USB2.0 and OTG, SD and MMC cards, NAND, PWM,
+	  Ethernet, IR TX/RX, I2C, I2S, S/PDIF, and built-in Wi-Fi / Bluetooth combo
+	  chip and several DDR3 and DDR4 options.
+
 endchoice
 
 source "board/mediatek/mt7623/Kconfig"

arch/arm/mach-mediatek/Makefile

@@ -6,3 +6,4 @@ obj-$(CONFIG_SPL_BUILD)	+= spl.o
 obj-$(CONFIG_TARGET_MT7623) += mt7623/
 obj-$(CONFIG_TARGET_MT7629) += mt7629/
 obj-$(CONFIG_TARGET_MT8516) += mt8516/
+obj-$(CONFIG_TARGET_MT8518) += mt8518/

arch/arm/mach-mediatek/mt8518/Makefile

@@ -0,0 +1,4 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
+obj-y += lowlevel_init.o

arch/arm/mach-mediatek/mt8518/init.c

@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Configuration for MediaTek MT8518 SoC
+ *
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <ram.h>
+#include <asm/arch/misc.h>
+#include <asm/armv8/mmu.h>
+#include <asm/sections.h>
+#include <dm/uclass.h>
+#include <dt-bindings/clock/mt8518-clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	int ret;
+
+	ret = fdtdec_setup_memory_banksize();
+	if (ret)
+		return ret;
+
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = gd->ram_base;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+	psci_system_reset();
+}
+
+int print_cpuinfo(void)
+{
+	printf("CPU:   MediaTek MT8518\n");
+	return 0;
+}
+
+static struct mm_region mt8518_mem_map[] = {
+	{
+		/* DDR */
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
+	}, {
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		0,
+	}
+};
+
+struct mm_region *mem_map = mt8518_mem_map;

arch/arm/mach-mediatek/mt8518/lowlevel_init.S

@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Mingming Lee <mingming.lee@mediatek.com>
+ */
+
+/*
+ * Switch from AArch64 EL2 to AArch32 EL2
+ * @param inputs:
+ * x0: argument, zero
+ * x1: machine nr
+ * x2: fdt address
+ * x3: input argument
+ * x4: kernel entry point
+ * @param outputs for secure firmware:
+ * x0: function id
+ * x1: kernel entry point
+ * x2: machine nr
+ * x3: fdt address
+*/
+.global armv8_el2_to_aarch32
+armv8_el2_to_aarch32:
+	mov     x3, x2
+	mov     x2, x1
+	mov     x1, x4
+	mov	x4, #0
+	/* Define in src\bsp\trustzone\atf\v1.2\ */
+	/* mt8xxx\plat\mediatek\common\sip_svc.h */
+	/* MTK_SIP_KERNEL_BOOT_AARCH64 for U-BOOT-64 to KERNEL*/
+	ldr x0, =0xC2000200
+	SMC #0
+	ret