arm: mediatek: add support for MediaTek MT7986 SoC

This patch adds basic support for MediaTek MT7986 SoC.
This include the file that will initialize the SoC after boot and its
device tree.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
This commit is contained in:
Weijie Gao 2022-09-09 19:59:09 +08:00 committed by Tom Rini
parent ebdd6afa54
commit 10c6233696
7 changed files with 477 additions and 0 deletions

View file

@ -0,0 +1,33 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2022 MediaTek Inc.
* Author: Sam Shih <sam.shih@mediatek.com>
*/
&topckgen {
u-boot,dm-pre-reloc;
};
&pericfg {
u-boot,dm-pre-reloc;
};
&apmixedsys {
u-boot,dm-pre-reloc;
};
&timer0 {
u-boot,dm-pre-reloc;
};
&uart0 {
u-boot,dm-pre-reloc;
};
&snand {
u-boot,dm-pre-reloc;
};
&pinctrl {
u-boot,dm-pre-reloc;
};

350
arch/arm/dts/mt7986.dtsi Normal file
View file

@ -0,0 +1,350 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2022 MediaTek Inc.
* Author: Sam Shih <sam.shih@mediatek.com>
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/clock/mt7986-clk.h>
#include <dt-bindings/reset/mt7629-reset.h>
#include <dt-bindings/pinctrl/mt65xx.h>
/ {
compatible = "mediatek,mt7986";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
config {
u-boot,mmc-env-partition = "u-boot-env";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
mediatek,hwver = <&hwver>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
mediatek,hwver = <&hwver>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
mediatek,hwver = <&hwver>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
mediatek,hwver = <&hwver>;
};
};
dummy_clk: dummy12m {
compatible = "fixed-clock";
clock-frequency = <12000000>;
#clock-cells = <0>;
/* must need this line, or uart uanable to get dummy_clk */
u-boot,dm-pre-reloc;
};
hwver: hwver {
compatible = "mediatek,hwver", "syscon";
reg = <0x8000000 0x1000>;
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
clock-frequency = <13000000>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
arm,cpu-registers-not-fw-configured;
};
timer0: timer@10008000 {
compatible = "mediatek,mt7986-timer";
reg = <0x10008000 0x1000>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CK_INFRA_CK_F26M>;
clock-names = "gpt-clk";
u-boot,dm-pre-reloc;
};
watchdog: watchdog@1001c000 {
compatible = "mediatek,mt7986-wdt";
reg = <0x1001c000 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
status = "disabled";
};
gic: interrupt-controller@c000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
interrupt-controller;
reg = <0x0c000000 0x40000>, /* GICD */
<0x0c080000 0x200000>; /* GICR */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
fixed_plls: apmixedsys@1001E000 {
compatible = "mediatek,mt7986-fixed-plls";
reg = <0x1001E000 0x1000>;
#clock-cells = <1>;
};
topckgen: topckgen@1001B000 {
compatible = "mediatek,mt7986-topckgen";
reg = <0x1001B000 0x1000>;
clock-parent = <&fixed_plls>;
#clock-cells = <1>;
};
infracfg_ao: infracfg_ao@10001000 {
compatible = "mediatek,mt7986-infracfg_ao";
reg = <0x10001000 0x68>;
clock-parent = <&infracfg>;
#clock-cells = <1>;
};
infracfg: infracfg@10001040 {
compatible = "mediatek,mt7986-infracfg";
reg = <0x10001000 0x1000>;
clock-parent = <&topckgen>;
#clock-cells = <1>;
};
pinctrl: pinctrl@1001f000 {
compatible = "mediatek,mt7986-pinctrl";
reg = <0x1001f000 0x1000>,
<0x11c30000 0x1000>,
<0x11c40000 0x1000>,
<0x11e20000 0x1000>,
<0x11e30000 0x1000>,
<0x11f00000 0x1000>,
<0x11f10000 0x1000>,
<0x1000b000 0x1000>;
reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
"iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
"iocfg_tl_base", "eint";
gpio: gpio-controller {
gpio-controller;
#gpio-cells = <2>;
};
};
pwm: pwm@10048000 {
compatible = "mediatek,mt7986-pwm";
reg = <0x10048000 0x1000>;
#clock-cells = <1>;
#pwm-cells = <2>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg CK_INFRA_PWM>,
<&infracfg_ao CK_INFRA_PWM_BSEL>,
<&infracfg_ao CK_INFRA_PWM1_CK>,
<&infracfg_ao CK_INFRA_PWM2_CK>;
assigned-clocks = <&topckgen CK_TOP_PWM_SEL>,
<&infracfg CK_INFRA_PWM_BSEL>,
<&infracfg CK_INFRA_PWM1_SEL>,
<&infracfg CK_INFRA_PWM2_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_M_D4>,
<&infracfg CK_INFRA_PWM>,
<&infracfg CK_INFRA_PWM>,
<&infracfg CK_INFRA_PWM>;
clock-names = "top", "main", "pwm1", "pwm2";
status = "disabled";
u-boot,dm-pre-reloc;
};
uart0: serial@11002000 {
compatible = "mediatek,hsuart";
reg = <0x11002000 0x400>;
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg_ao CK_INFRA_UART0_CK>;
assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
<&infracfg_ao CK_INFRA_UART0_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
<&infracfg CK_INFRA_UART>;
mediatek,force-highspeed;
status = "disabled";
u-boot,dm-pre-reloc;
};
uart1: serial@11003000 {
compatible = "mediatek,hsuart";
reg = <0x11003000 0x400>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg_ao CK_INFRA_UART1_CK>;
assigned-clocks = <&infracfg CK_INFRA_UART1_SEL>;
assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
mediatek,force-highspeed;
status = "disabled";
};
uart2: serial@11004000 {
compatible = "mediatek,hsuart";
reg = <0x11004000 0x400>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&infracfg_ao CK_INFRA_UART2_CK>;
assigned-clocks = <&infracfg CK_INFRA_UART2_SEL>;
assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
mediatek,force-highspeed;
status = "disabled";
};
snand: snand@11005000 {
compatible = "mediatek,mt7986-snand";
reg = <0x11005000 0x1000>,
<0x11006000 0x1000>;
reg-names = "nfi", "ecc";
clocks = <&infracfg_ao CK_INFRA_SPINFI1_CK>,
<&infracfg_ao CK_INFRA_NFI1_CK>,
<&infracfg_ao CK_INFRA_NFI_HCK_CK>;
clock-names = "pad_clk", "nfi_clk", "nfi_hclk";
assigned-clocks = <&topckgen CK_TOP_SPINFI_SEL>,
<&topckgen CK_TOP_NFI1X_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_M_D8>,
<&topckgen CK_TOP_CB_M_D8>;
status = "disabled";
};
ethsys: syscon@15000000 {
compatible = "mediatek,mt7986-ethsys", "syscon";
reg = <0x15000000 0x1000>;
clock-parent = <&topckgen>;
#clock-cells = <1>;
#reset-cells = <1>;
};
eth: ethernet@15100000 {
compatible = "mediatek,mt7986-eth", "syscon";
reg = <0x15100000 0x20000>;
resets = <&ethsys ETHSYS_FE_RST>;
reset-names = "fe";
mediatek,ethsys = <&ethsys>;
mediatek,sgmiisys = <&sgmiisys0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
sgmiisys0: syscon@10060000 {
compatible = "mediatek,mt7986-sgmiisys", "syscon";
reg = <0x10060000 0x1000>;
#clock-cells = <1>;
};
sgmiisys1: syscon@10070000 {
compatible = "mediatek,mt7986-sgmiisys", "syscon";
reg = <0x10070000 0x1000>;
#clock-cells = <1>;
};
spi0: spi@1100a000 {
compatible = "mediatek,ipm-spi";
reg = <0x1100a000 0x100>;
clocks = <&infracfg_ao CK_INFRA_SPI0_CK>,
<&topckgen CK_TOP_SPI_SEL>;
assigned-clocks = <&topckgen CK_TOP_SPI_SEL>,
<&infracfg CK_INFRA_SPI0_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_M_D2>,
<&topckgen CK_INFRA_ISPI0>;
clock-names = "sel-clk", "spi-clk";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
spi1: spi@1100b000 {
compatible = "mediatek,ipm-spi";
reg = <0x1100b000 0x100>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
mmc0: mmc@11230000 {
compatible = "mediatek,mt7986-mmc";
reg = <0x11230000 0x1000>,
<0x11C20000 0x1000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CK_TOP_EMMC_416M>,
<&topckgen CK_TOP_EMMC_250M>,
<&infracfg_ao CK_INFRA_MSDC_CK>;
assigned-clocks = <&topckgen CK_TOP_EMMC_416M_SEL>,
<&topckgen CK_TOP_EMMC_250M_SEL>;
assigned-clock-parents = <&topckgen CK_TOP_CB_M_416M>,
<&topckgen CK_TOP_NET1_D5_D2>;
clock-names = "source", "hclk", "source_cg";
status = "disabled";
};
xhci: xhci@11200000 {
compatible = "mediatek,mt7986-xhci",
"mediatek,mtk-xhci";
reg = <0x11200000 0x2e00>,
<0x11203e00 0x0100>;
reg-names = "mac", "ippc";
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
phys = <&u2port0 PHY_TYPE_USB2>,
<&u3port0 PHY_TYPE_USB3>,
<&u2port1 PHY_TYPE_USB2>;
clocks = <&dummy_clk>,
<&dummy_clk>,
<&dummy_clk>,
<&dummy_clk>,
<&dummy_clk>;
clock-names = "sys_ck",
"xhci_ck",
"ref_ck",
"mcu_ck",
"dma_ck";
tpl-support;
status = "okay";
};
usbtphy: usb-phy@11e10000 {
compatible = "mediatek,mt7986",
"mediatek,generic-tphy-v2";
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
u2port0: usb-phy@11e10000 {
reg = <0x11e10000 0x700>;
clocks = <&dummy_clk>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u3port0: usb-phy@11e10700 {
reg = <0x11e10700 0x900>;
clocks = <&dummy_clk>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
u2port1: usb-phy@11e11000 {
reg = <0x11e11000 0x700>;
clocks = <&dummy_clk>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
};
};

View file

@ -40,6 +40,15 @@ config TARGET_MT7629
including DDR3, crypto engine, 3x3 11n/ac Wi-Fi, Gigabit Ethernet,
switch, USB3.0, PCIe, UART, SPI, I2C and PWM.
config TARGET_MT7986
bool "MediaTek MT7986 SoC"
select ARM64
select CPU
help
The MediaTek MT7986 is a ARM64-based SoC with a quad-core Cortex-A53.
including UART, SPI, SPI flash, USB3.0, MMC, NAND, SNFI, PWM, PCIe,
Gigabit Ethernet, I2C, built-in 4x4 Wi-Fi, and PCIe.
config TARGET_MT8183
bool "MediaTek MT8183 SoC"
select ARM64
@ -84,6 +93,7 @@ config SYS_BOARD
default "mt7622" if TARGET_MT7622
default "mt7623" if TARGET_MT7623
default "mt7629" if TARGET_MT7629
default "mt7986" if TARGET_MT7986
default "mt8183" if TARGET_MT8183
default "mt8512" if TARGET_MT8512
default "mt8516" if TARGET_MT8516
@ -99,6 +109,7 @@ config SYS_CONFIG_NAME
default "mt7622" if TARGET_MT7622
default "mt7623" if TARGET_MT7623
default "mt7629" if TARGET_MT7629
default "mt7986" if TARGET_MT7986
default "mt8183" if TARGET_MT8183
default "mt8512" if TARGET_MT8512
default "mt8516" if TARGET_MT8516
@ -113,6 +124,7 @@ config MTK_BROM_HEADER_INFO
string
default "media=nor" if TARGET_MT8518 || TARGET_MT8512 || TARGET_MT7629 || TARGET_MT7622
default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183
default "media=snand;nandinfo=2k+64" if TARGET_MT7986
default "lk=1" if TARGET_MT7623
endif

View file

@ -7,6 +7,7 @@ obj-$(CONFIG_MT8512) += mt8512/
obj-$(CONFIG_TARGET_MT7622) += mt7622/
obj-$(CONFIG_TARGET_MT7623) += mt7623/
obj-$(CONFIG_TARGET_MT7629) += mt7629/
obj-$(CONFIG_TARGET_MT7986) += mt7986/
obj-$(CONFIG_TARGET_MT8183) += mt8183/
obj-$(CONFIG_TARGET_MT8516) += mt8516/
obj-$(CONFIG_TARGET_MT8518) += mt8518/

View file

@ -0,0 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += init.o
obj-y += lowlevel_init.o

View file

@ -0,0 +1,45 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam Shih <sam.shih@mediatek.com>
*/
#include <init.h>
#include <asm/armv8/mmu.h>
#include <asm/system.h>
#include <asm/global_data.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_2G);
return 0;
}
void reset_cpu(ulong addr)
{
psci_system_reset();
}
static struct mm_region mt7986_mem_map[] = {
{
/* DDR */
.virt = 0x40000000UL,
.phys = 0x40000000UL,
.size = 0x80000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
}, {
.virt = 0x00000000UL,
.phys = 0x00000000UL,
.size = 0x40000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
0,
}
};
struct mm_region *mem_map = mt7986_mem_map;

View file

@ -0,0 +1,32 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 MediaTek Inc.
* Author: Sam Shih <sam.shih@mediatek.com>
*/
/*
* Switch from AArch64 EL2 to AArch32 EL2
* @param inputs:
* x0: argument, zero
* x1: machine nr
* x2: fdt address
* x3: input argument
* x4: kernel entry point
* @param outputs for secure firmware:
* x0: function id
* x1: kernel entry point
* x2: machine nr
* x3: fdt address
*
* [1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/plat/mediatek/common/mtk_sip_svc.c
*/
.global armv8_el2_to_aarch32
armv8_el2_to_aarch32:
mov x3, x2
mov x2, x1
mov x1, x4
mov x4, #0
ldr x0, =0x82000200 /* MTK_SIP_KERNEL_BOOT_AARCH32 */
SMC #0
ret