spi: add support for all spi modes with soft spi

The spi bitbanging driver did not implement all spi modes properly. Add
code to support all spi modes, honoring soft_spi_set_mode() and
defaulting to spi mode 0. Previously, CPHA was implemented inversely
(defaulting to CPHA=1) and CPOL=1 was hardcoded.

Signed-off-by: Johannes Holland <johannes.holland@infineon.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Johannes Holland 2020-05-11 15:22:26 +02:00 committed by Jagan Teki
parent f247354708
commit 0e146993bb

View file

@ -61,10 +61,12 @@ static int soft_spi_sda(struct udevice *dev, int bit)
static int soft_spi_cs_activate(struct udevice *dev) static int soft_spi_cs_activate(struct udevice *dev)
{ {
struct udevice *bus = dev_get_parent(dev); struct udevice *bus = dev_get_parent(dev);
struct soft_spi_priv *priv = dev_get_priv(bus);
struct soft_spi_platdata *plat = dev_get_platdata(bus); struct soft_spi_platdata *plat = dev_get_platdata(bus);
int cidle = !!(priv->mode & SPI_CPOL);
dm_gpio_set_value(&plat->cs, 0); dm_gpio_set_value(&plat->cs, 0);
dm_gpio_set_value(&plat->sclk, 0); dm_gpio_set_value(&plat->sclk, cidle); /* to idle */
dm_gpio_set_value(&plat->cs, 1); dm_gpio_set_value(&plat->cs, 1);
return 0; return 0;
@ -82,11 +84,14 @@ static int soft_spi_cs_deactivate(struct udevice *dev)
static int soft_spi_claim_bus(struct udevice *dev) static int soft_spi_claim_bus(struct udevice *dev)
{ {
struct udevice *bus = dev_get_parent(dev);
struct soft_spi_priv *priv = dev_get_priv(bus);
int cidle = !!(priv->mode & SPI_CPOL);
/* /*
* Make sure the SPI clock is in idle state as defined for * Make sure the SPI clock is in idle state as defined for
* this slave. * this slave.
*/ */
return soft_spi_scl(dev, 0); return soft_spi_scl(dev, cidle);
} }
static int soft_spi_release_bus(struct udevice *dev) static int soft_spi_release_bus(struct udevice *dev)
@ -117,7 +122,8 @@ static int soft_spi_xfer(struct udevice *dev, unsigned int bitlen,
uchar tmpdout = 0; uchar tmpdout = 0;
const u8 *txd = dout; const u8 *txd = dout;
u8 *rxd = din; u8 *rxd = din;
int cpha = priv->mode & SPI_CPHA; int cpha = !!(priv->mode & SPI_CPHA);
int cidle = !!(priv->mode & SPI_CPOL);
unsigned int j; unsigned int j;
debug("spi_xfer: slave %s:%s dout %08X din %08X bitlen %u\n", debug("spi_xfer: slave %s:%s dout %08X din %08X bitlen %u\n",
@ -143,22 +149,42 @@ static int soft_spi_xfer(struct udevice *dev, unsigned int bitlen,
tmpdin = 0; tmpdin = 0;
} }
if (!cpha) /*
soft_spi_scl(dev, 0); * CPOL 0: idle is low (0), active is high (1)
* CPOL 1: idle is high (1), active is low (0)
*/
/*
* drive bit
* CPHA 1: CLK from idle to active
*/
if (cpha)
soft_spi_scl(dev, !cidle);
if ((plat->flags & SPI_MASTER_NO_TX) == 0) if ((plat->flags & SPI_MASTER_NO_TX) == 0)
soft_spi_sda(dev, !!(tmpdout & 0x80)); soft_spi_sda(dev, !!(tmpdout & 0x80));
udelay(plat->spi_delay_us); udelay(plat->spi_delay_us);
if (cpha)
soft_spi_scl(dev, 0); /*
* sample bit
* CPHA 0: CLK from idle to active
* CPHA 1: CLK from active to idle
*/
if (!cpha)
soft_spi_scl(dev, !cidle);
else else
soft_spi_scl(dev, 1); soft_spi_scl(dev, cidle);
tmpdin <<= 1; tmpdin <<= 1;
if ((plat->flags & SPI_MASTER_NO_RX) == 0) if ((plat->flags & SPI_MASTER_NO_RX) == 0)
tmpdin |= dm_gpio_get_value(&plat->miso); tmpdin |= dm_gpio_get_value(&plat->miso);
tmpdout <<= 1; tmpdout <<= 1;
udelay(plat->spi_delay_us); udelay(plat->spi_delay_us);
if (cpha)
soft_spi_scl(dev, 1); /*
* drive bit
* CPHA 0: CLK from active to idle
*/
if (!cpha)
soft_spi_scl(dev, cidle);
} }
/* /*
* If the number of bits isn't a multiple of 8, shift the last * If the number of bits isn't a multiple of 8, shift the last
@ -179,7 +205,7 @@ static int soft_spi_xfer(struct udevice *dev, unsigned int bitlen,
static int soft_spi_set_speed(struct udevice *dev, unsigned int speed) static int soft_spi_set_speed(struct udevice *dev, unsigned int speed)
{ {
/* Accept any speed */ /* Ignore any speed settings. Speed is implemented via "spi-delay-us" */
return 0; return 0;
} }