Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 15:41:40 +00:00
Code Issues Projects Releases Packages Wiki Activity

arm: mvebu: axp: ddr: Switch to using DM I2C API

Browse source 
No functional change intended. This patch switches from the legacy I2C
API to the DM I2C API, so that this code can be used with DM I2C
enabled.

Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Stefan Roese 2021-11-18 09:19:38 +01:00
parent 622882893d
commit 0cbd3d8121
3 changed files with 26 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

16
drivers/ddr/marvell/axp/ddr3_init.c
View file

@ -361,12 +361,18 @@ static u32 ddr3_init_main(void)
__maybe_unused u32 ddr_width = BUS_WIDTH;
__maybe_unused int status;
__maybe_unused u32 win_backup[16];
__maybe_unused struct udevice *udev;
__maybe_unused int ret;
/* SoC/Board special Initializtions */
fab_opt = ddr3_get_fab_opt();
#ifdef CONFIG_SPD_EEPROM
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
ret = i2c_get_chip_for_busnum(0, BUS_WIDTH_ECC_TWSI_ADDR, 1, &udev);
if (ret) {
printf("Cannot find SPD EEPROM\n");
return MV_DDR3_TRAINING_ERR_BAD_DIMM_SETUP;
}
#endif
ddr3_print_version();
@ -438,7 +444,7 @@ static u32 ddr3_init_main(void)
#if defined(ECC_SUPPORT) && defined(AUTO_DETECTION_SUPPORT)
ecc = 0;
if (ddr3_check_config(BUS_WIDTH_ECC_TWSI_ADDR, CONFIG_ECC))
if (ddr3_check_config(udev, CONFIG_ECC))
ecc = 1;
#endif
@ -483,7 +489,7 @@ static u32 ddr3_init_main(void)
* Dynamically Set 32Bit and ECC for AXP (Relevant only for
* Marvell DB boards)
*/
if (ddr3_check_config(BUS_WIDTH_ECC_TWSI_ADDR, CONFIG_BUS_WIDTH)) {
if (ddr3_check_config(udev, CONFIG_BUS_WIDTH)) {
ddr_width = 32;
DEBUG_INIT_S("DDR3 Training Sequence - DRAM bus width 32Bit\n");
}
@ -904,7 +910,7 @@ void ddr3_static_mc_init(void)
* Notes: Only Available for ArmadaXP/Armada 370 DB boards
* Returns: None.
*/
int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type)
int ddr3_check_config(struct udevice *udev, MV_CONFIG_TYPE config_type)
{
#ifdef AUTO_DETECTION_SUPPORT
u8 data = 0;
@ -916,7 +922,7 @@ int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type)
else
offset = 0;
ret = i2c_read(twsi_addr, offset, 1, (u8 *)&data, 1);
ret = dm_i2c_read(udev, offset, &data, 1);
if (!ret) {
switch (config_type) {
case CONFIG_ECC:

2
drivers/ddr/marvell/axp/ddr3_init.h
View file

@ -101,7 +101,7 @@ void fix_pll_val(u8 target_fab);
u32 ddr3_get_fab_opt(void);
u32 ddr3_get_cpu_freq(void);
u32 ddr3_get_vco_freq(void);
int ddr3_check_config(u32 addr, MV_CONFIG_TYPE config_type);
int ddr3_check_config(struct udevice *udev, MV_CONFIG_TYPE config_type);
u32 ddr3_get_static_mc_value(u32 reg_addr, u32 offset1, u32 mask1, u32 offset2,
u32 mask2);
u32 ddr3_cl_to_valid_cl(u32 cl);

16
drivers/ddr/marvell/axp/ddr3_spd.c
View file

@ -209,13 +209,19 @@ static u32 ddr3_get_dimm_num(u32 *dimm_addr)
/* Read the dimm eeprom */
for (dimm_cur_addr = MAX_DIMM_ADDR; dimm_cur_addr > MIN_DIMM_ADDR;
dimm_cur_addr--) {
struct udevice *udev;
data[SPD_DEV_TYPE_BYTE] = 0;
/* Far-End DIMM must be connected */
if ((dimm_num == 0) && (dimm_cur_addr < FAR_END_DIMM_ADDR))
return 0;
ret = i2c_read(dimm_cur_addr, 0, 1, (uchar *)data, 3);
ret = i2c_get_chip_for_busnum(0, dimm_cur_addr, 1, &udev);
if (ret)
continue;
ret = dm_i2c_read(udev, 0, data, 3);
if (!ret) {
if (data[SPD_DEV_TYPE_BYTE] == SPD_MEM_TYPE_DDR3) {
dimm_addr[dimm_num] = dimm_cur_addr;
@ -245,9 +251,15 @@ int ddr3_spd_init(MV_DIMM_INFO *info, u32 dimm_addr, u32 dimm_width)
__maybe_unused u8 vendor_high, vendor_low;
if (dimm_addr != 0) {
struct udevice *udev;
memset(spd_data, 0, SPD_SIZE * sizeof(u8));
ret = i2c_read(dimm_addr, 0, 1, (uchar *)spd_data, SPD_SIZE);
ret = i2c_get_chip_for_busnum(0, dimm_addr, 1, &udev);
if (ret)
return MV_DDR3_TRAINING_ERR_TWSI_FAIL;
ret = dm_i2c_read(udev, 0, spd_data, SPD_SIZE);
if (ret)
return MV_DDR3_TRAINING_ERR_TWSI_FAIL;
}