Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-09-21 15:12:04 +00:00
Code Issues Projects Releases Packages Wiki Activity

drivers: net: aquantia: set SMBus addr based on DT property

Browse source 
Aquantia PHYs have a SMBus interface mostly used for debug.  The addresses
on this interface are normally set up by PHY firmware, but depending on the
board they may end up not being unique.  Add an optional DT property used
to change SMBus address if needed.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Alex Marginean 2019-11-14 18:28:34 +02:00 committed by Joe Hershberger
parent 7552ee9a01
commit 05f86070c0
1 changed files with 15 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

15
drivers/net/phy/aquantia.c
View file

@ -94,6 +94,9 @@
#define AQUANTIA_VND1_GSYSCFG_5G 3
#define AQUANTIA_VND1_GSYSCFG_10G 4
#define AQUANTIA_VND1_SMBUS0 0xc485
#define AQUANTIA_VND1_SMBUS1 0xc495
/* addresses of memory segments in the phy */
#define DRAM_BASE_ADDR 0x3FFE0000
#define IRAM_BASE_ADDR 0x40000000
@ -355,6 +358,18 @@ static int aquantia_dts_config(struct phy_device *phydev)
phy_write(phydev, MDIO_MMD_PMAPMD, AQUANTIA_PMA_RX_VENDOR_P1,
reg);
}
if (!ofnode_read_u32(node, "smb-addr", &prop)) {
debug("smb-addr = %x\n", (int)prop);
/*
* there are two addresses here, normally just one bus would
* be in use so we're setting both regs using the same DT
* property.
*/
phy_write(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_SMBUS0,
(u16)(prop << 1));
phy_write(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_SMBUS1,
(u16)(prop << 1));
}
#endif
return 0;