USB: mx51evk: add end enable USB host support on port 1

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>
This commit is contained in:
Wolfgang Grandegger 2011-11-11 14:03:38 +01:00 committed by Remy Bohmer
parent 45cf6ada60
commit 055d969332
2 changed files with 75 additions and 0 deletions

View file

@ -35,6 +35,7 @@
#include <pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
#include <usb/ehci-fsl.h>
DECLARE_GLOBAL_DATA_PTR;
@ -172,6 +173,64 @@ static void setup_iomux_spi(void)
}
#endif
#ifdef CONFIG_USB_EHCI_MX5
#define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */
#define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */
#define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */
#define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */
#define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \
PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \
PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE)
#define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \
PAD_CTL_SRE_FAST)
#define NO_PAD (1 << 16)
static void setup_usb_h1(void)
{
setup_iomux_usb_h1();
/* GPIO_1_7 for USBH1 hub reset */
mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD);
/* GPIO_2_1 */
mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD);
/* GPIO_2_5 for USB PHY reset */
mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1);
mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD);
}
void board_ehci_hcd_init(int port)
{
/* Set USBH1_STP to GPIO and toggle it */
mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
gpio_direction_output(MX51EVK_USBH1_STP, 0);
gpio_direction_output(MX51EVK_USB_PHY_RESET, 0);
mdelay(10);
gpio_set_value(MX51EVK_USBH1_STP, 1);
/* Set back USBH1_STP to be function */
mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
/* De-assert USB PHY RESETB */
gpio_set_value(MX51EVK_USB_PHY_RESET, 1);
/* Drive USB_CLK_EN_B line low */
gpio_direction_output(MX51EVK_USB_CLK_EN_B, 0);
/* Reset USB hub */
gpio_direction_output(MX51EVK_USBH1_HUB_RST, 0);
mdelay(2);
gpio_set_value(MX51EVK_USBH1_HUB_RST, 1);
}
#endif
static void power_init(void)
{
unsigned int val;
@ -394,6 +453,9 @@ int board_early_init_f(void)
{
setup_iomux_uart();
setup_iomux_fec();
#ifdef CONFIG_USB_EHCI_MX5
setup_usb_h1();
#endif
return 0;
}

View file

@ -110,6 +110,19 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX5
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI
#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1