Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 18:28:55 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/sunxi-u-boot.dtsi

110 lines
1.8 KiB
Text
Raw Normal View History

sunxi: Use binman for sunxi boards Move sunxi boards to use binman. This involves adding the image definition to the device tree and using it in the Makefile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26 03:16:01 +00:00
#include <config.h>
sunxi: binman: Use a macro for the BL31 load address This consolidates the SoC-specific part at the top of the file to avoid cluttering it up with preprocessor conditions. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:12 +00:00
#ifdef CONFIG_MACH_SUN50I_H6
#define BL31_ADDR 0x104000
sunxi: binman: Add support for including SCP firmware Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a System Control Processor, or SCP. ARM Trusted Firmware (ATF) communicates with the SCP over SCPI to implement the PSCI system suspend, shutdown and reset functionality. Currently, SCP firmware is optional; the system will boot and run without it, but system suspend will be unavailable. Since all communication with the SCP is mediated by ATF, the only thing U-Boot needs to do is load the firmware into SRAM. The SCP firmware occupies the last 16KiB of SRAM A2, immediately following ATF. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:16 +00:00
#define SCP_ADDR 0x114000
sunxi: Add support for H616 SoC H616 is very similar to H6 so most of the infrastructure can be reused. However, two big differences are that it doesn't have functional SRAM A2 which is usually used for TF-A and it doesn't have ARISC co-processor. It also needs bigger SPL size - 48 KiB. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 20:11:46 +00:00
#elif defined(CONFIG_MACH_SUN50I_H616)
sunxi: H616: Change TF-A load address to beginning of DRAM Loading Trusted-Firmware's BL31 at 16KB into DRAM was originally a hack to allow sharing more code with the other SoCs (which use this offset in SRAM). However there is no longer a reason for that, as the problematic macros have been properly separated there. The latest (and hopefully final) TF-A code drop now changes the load address to the beginning of DRAM, which is also more easily protected by the Trustzone memory controller (code to be done). Adjust the load address of BL31 now, to avoid any issues with incompatible versions later on (the TF-A patches are about to be merged). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org>
2021-03-25 16:20:13 +00:00
#define BL31_ADDR 0x40000000
sunxi: binman: Use a macro for the BL31 load address This consolidates the SoC-specific part at the top of the file to avoid cluttering it up with preprocessor conditions. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:12 +00:00
#else
#define BL31_ADDR 0x44000
sunxi: binman: Add support for including SCP firmware Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a System Control Processor, or SCP. ARM Trusted Firmware (ATF) communicates with the SCP over SCPI to implement the PSCI system suspend, shutdown and reset functionality. Currently, SCP firmware is optional; the system will boot and run without it, but system suspend will be unavailable. Since all communication with the SCP is mediated by ATF, the only thing U-Boot needs to do is load the firmware into SRAM. The SCP firmware occupies the last 16KiB of SRAM A2, immediately following ATF. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:16 +00:00
#define SCP_ADDR 0x50000
sunxi: binman: Use a macro for the BL31 load address This consolidates the SoC-specific part at the top of the file to avoid cluttering it up with preprocessor conditions. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:12 +00:00
#endif
sunxi: Use binman for sunxi boards Move sunxi boards to use binman. This involves adding the image definition to the device tree and using it in the Makefile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26 03:16:01 +00:00
/ {
arm: dts: sunxi: Alter mmc2 auto-numbering to mmc1 Environment and fastboot mmc devices are configured based on the number of mmc slots defined on particular board configs, MMC_SUNXI_SLOT_EXTRA. If MMC_SUNXI_SLOT_EXTRA is more than 1, the default env and fastboot mmc devices is mmc1 by assuming mmc0 is SD and mmc1 is emmc device. But with DM_MMC the mmc devices are numbered as per the dts node enablement. If there is a chance of having enabling all mmc nodes in dts say mmc0, mmc1, mmc2 then the default env and fastboot devices will failed to assign proper emmc device since mmc2 is emmc in most of the Allwinner platforms. So, we need to alter the auto-numbering by aliasing mmc2 to mmc1 since aliases take precedence over auto-numbering. If the dts enables mmc0, mmc1, mmc2, then all the nodes will probe sequentially and auto-numbered as it is. but when aliases mmc1 with mmc2 the resulting number should be that mmc0 is till mmc0, mmc2 become mmc1 and mmc2 become mmc1 Without aliases of mmc1 = &mmc2; ------------------------------- MMC: mmc@1c0f000: 0, mmc@1c10000: 1, mmc@1c11000: 2 With aliases of mmc1 = &mmc2; ---------------------------- MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000' mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... OK Some platforms like A20 has mmc0...mmc3, but there is no usecases now for enabling all mmc controllers in any of A20 board dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-01-21 10:31:15 +00:00
aliases {
mmc1 = &mmc2;
};
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
binman: binman {
multiple-images;
};
};
&binman {
u-boot-sunxi-with-spl {
sunxi: Use binman for sunxi boards Move sunxi boards to use binman. This involves adding the image definition to the device tree and using it in the Makefile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26 03:16:01 +00:00
filename = "u-boot-sunxi-with-spl.bin";
pad-byte = <0xff>;
sunxi: binman: Fix spacing between nodes Nodes should have a blank line separating them from sibling nodes and properties. Add the necessary lines. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:10 +00:00
sunxi: Use binman for sunxi boards Move sunxi boards to use binman. This involves adding the image definition to the device tree and using it in the Makefile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26 03:16:01 +00:00
blob {
filename = "spl/sunxi-spl.bin";
};
sunxi: binman: Fix spacing between nodes Nodes should have a blank line separating them from sibling nodes and properties. Add the necessary lines. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:10 +00:00
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
#ifdef CONFIG_ARM64
fit {
description = "Configuration to load ATF before U-Boot";
#address-cells = <1>;
fit,fdt-list = "of-list";
images {
uboot {
description = "U-Boot (64-bit)";
type = "standalone";
sunxi: binman: Update FIT component descriptions Since commit d879616e9e64 ("spl: fit: simplify logic for FDT loading for non-OS boots"), the SPL looks at the "os" properties of FIT images to determine where to append the FDT. The "os" property of the "firmware" image also determines how to execute the next stage of the boot process, as in 1d3790905d9c ("spl: atf: introduce spl_invoke_atf and make bl31_entry private"). For this reason, the next stage must be specified in "firmware", not in "loadables". To support this additional functionality, and to properly model the boot process, where ATF runs before U-Boot, add the "os" properties and swap the firmware/loadable images in the FIT image. Since this description was copied as an example in commit 70248d6a2916 ("binman: Support generating FITs with multiple dtbs"), update those examples as well for correctness and consistency. Acked-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:14 +00:00
os = "u-boot";
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
arch = "arm64";
compression = "none";
sunxi: binman: Do not hardcode U-Boot load address The FIT description has access to the configuration variables. Use the appropriate variable instead of hardcoding the address. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-02-08 06:03:17 +00:00
load = <CONFIG_SYS_TEXT_BASE>;
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
u-boot-nodtb {
};
};
sunxi: binman: Fix spacing between nodes Nodes should have a blank line separating them from sibling nodes and properties. Add the necessary lines. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:10 +00:00
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
atf {
description = "ARM Trusted Firmware";
type = "firmware";
sunxi: binman: Update FIT component descriptions Since commit d879616e9e64 ("spl: fit: simplify logic for FDT loading for non-OS boots"), the SPL looks at the "os" properties of FIT images to determine where to append the FDT. The "os" property of the "firmware" image also determines how to execute the next stage of the boot process, as in 1d3790905d9c ("spl: atf: introduce spl_invoke_atf and make bl31_entry private"). For this reason, the next stage must be specified in "firmware", not in "loadables". To support this additional functionality, and to properly model the boot process, where ATF runs before U-Boot, add the "os" properties and swap the firmware/loadable images in the FIT image. Since this description was copied as an example in commit 70248d6a2916 ("binman: Support generating FITs with multiple dtbs"), update those examples as well for correctness and consistency. Acked-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:14 +00:00
os = "arm-trusted-firmware";
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
arch = "arm64";
compression = "none";
sunxi: binman: Use a macro for the BL31 load address This consolidates the SoC-specific part at the top of the file to avoid cluttering it up with preprocessor conditions. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:12 +00:00
load = <BL31_ADDR>;
entry = <BL31_ADDR>;
sunxi: binman: Fix spacing between nodes Nodes should have a blank line separating them from sibling nodes and properties. Add the necessary lines. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:10 +00:00
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
atf-bl31 {
sunxi: binman: Provide a default BL31 filename Prior to commit 7f7f8aca8257 ("sunxi: Convert 64-bit boards to use binman"), if the BL31 environment variable was not defined, the firmware would be loaded from a file "bl31.bin" in the current directory. Restore that behavior by providing that as the default filename in case no entry arg is provided, which will be the case if the environment variable is unset. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:11 +00:00
filename = "bl31.bin";
binman: sunxi: Add help message for missing sunxi ATF BL31 Add a special help message pointing to the relevant README. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-06 16:39:10 +00:00
missing-msg = "atf-bl31-sunxi";
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
};
};
sunxi: Add support for H616 SoC H616 is very similar to H6 so most of the infrastructure can be reused. However, two big differences are that it doesn't have functional SRAM A2 which is usually used for TF-A and it doesn't have ARISC co-processor. It also needs bigger SPL size - 48 KiB. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 20:11:46 +00:00
#ifndef CONFIG_MACH_SUN50I_H616
sunxi: binman: Add support for including SCP firmware Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a System Control Processor, or SCP. ARM Trusted Firmware (ATF) communicates with the SCP over SCPI to implement the PSCI system suspend, shutdown and reset functionality. Currently, SCP firmware is optional; the system will boot and run without it, but system suspend will be unavailable. Since all communication with the SCP is mediated by ATF, the only thing U-Boot needs to do is load the firmware into SRAM. The SCP firmware occupies the last 16KiB of SRAM A2, immediately following ATF. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:16 +00:00
scp {
description = "SCP firmware";
type = "firmware";
arch = "or1k";
compression = "none";
load = <SCP_ADDR>;
scp {
filename = "scp.bin";
missing-msg = "scp-sunxi";
};
};
sunxi: Add support for H616 SoC H616 is very similar to H6 so most of the infrastructure can be reused. However, two big differences are that it doesn't have functional SRAM A2 which is usually used for TF-A and it doesn't have ARISC co-processor. It also needs bigger SPL size - 48 KiB. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 20:11:46 +00:00
#endif
sunxi: binman: Add support for including SCP firmware Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a System Control Processor, or SCP. ARM Trusted Firmware (ATF) communicates with the SCP over SCPI to implement the PSCI system suspend, shutdown and reset functionality. Currently, SCP firmware is optional; the system will boot and run without it, but system suspend will be unavailable. Since all communication with the SCP is mediated by ATF, the only thing U-Boot needs to do is load the firmware into SRAM. The SCP firmware occupies the last 16KiB of SRAM A2, immediately following ATF. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:16 +00:00
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
@fdt-SEQ {
description = "NAME";
type = "flat_dt";
compression = "none";
};
};
configurations {
sunxi: binman: Respect the default FIT configuration binman can fill in the default FIT configuration index as selected by the "default-dt" argument, which is set to CONFIG_DEFAULT_DEVICE_TREE. Let's respect the user's configuration by taking advantage of this feature, instead of always defaulting to the first device tree in CONFIG_OF_LIST. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-02-08 06:03:16 +00:00
default = "@config-DEFAULT-SEQ";
sunxi: binman: Fix spacing between nodes Nodes should have a blank line separating them from sibling nodes and properties. Add the necessary lines. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:10 +00:00
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
@config-SEQ {
description = "NAME";
sunxi: binman: Update FIT component descriptions Since commit d879616e9e64 ("spl: fit: simplify logic for FDT loading for non-OS boots"), the SPL looks at the "os" properties of FIT images to determine where to append the FDT. The "os" property of the "firmware" image also determines how to execute the next stage of the boot process, as in 1d3790905d9c ("spl: atf: introduce spl_invoke_atf and make bl31_entry private"). For this reason, the next stage must be specified in "firmware", not in "loadables". To support this additional functionality, and to properly model the boot process, where ATF runs before U-Boot, add the "os" properties and swap the firmware/loadable images in the FIT image. Since this description was copied as an example in commit 70248d6a2916 ("binman: Support generating FITs with multiple dtbs"), update those examples as well for correctness and consistency. Acked-by: Patrick Wildt <patrick@blueri.se> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:14 +00:00
firmware = "atf";
sunxi: Add support for H616 SoC H616 is very similar to H6 so most of the infrastructure can be reused. However, two big differences are that it doesn't have functional SRAM A2 which is usually used for TF-A and it doesn't have ARISC co-processor. It also needs bigger SPL size - 48 KiB. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 20:11:46 +00:00
#ifdef CONFIG_MACH_SUN50I_H616
loadables = "uboot";
#else
sunxi: binman: Add support for including SCP firmware Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a System Control Processor, or SCP. ARM Trusted Firmware (ATF) communicates with the SCP over SCPI to implement the PSCI system suspend, shutdown and reset functionality. Currently, SCP firmware is optional; the system will boot and run without it, but system suspend will be unavailable. Since all communication with the SCP is mediated by ATF, the only thing U-Boot needs to do is load the firmware into SRAM. The SCP firmware occupies the last 16KiB of SRAM A2, immediately following ATF. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-10-22 02:12:16 +00:00
loadables = "scp", "uboot";
sunxi: Add support for H616 SoC H616 is very similar to H6 so most of the infrastructure can be reused. However, two big differences are that it doesn't have functional SRAM A2 which is usually used for TF-A and it doesn't have ARISC co-processor. It also needs bigger SPL size - 48 KiB. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-01-11 20:11:46 +00:00
#endif
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
fdt = "fdt-SEQ";
};
};
};
#else
sunxi: Use binman for sunxi boards Move sunxi boards to use binman. This involves adding the image definition to the device tree and using it in the Makefile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26 03:16:01 +00:00
u-boot-img {
binman: Rename 'position' to 'offset' After some thought, I believe there is an unfortunate naming flaw in binman. Entries have a position and size, but now that we support hierarchical sections it is unclear whether a position should be an absolute position within the image, or a relative position within its parent section. At present 'position' actually means the relative position. This indicates a need for an 'image position' for code that wants to find the location of an entry without having to do calculations back through parents to discover this image position. A better name for the current 'position' or 'pos' is 'offset'. It is not always an absolute position, but it is always an offset from its parent offset. It is unfortunate to rename this concept now, 18 months after binman was introduced. However I believe it is the right thing to do. The impact is mostly limited to binman itself and a few changes to in-tree users to binman: tegra sunxi x86 The change makes old binman definitions (e.g. downstream or out-of-tree) incompatible if they use the 'pos = <...>' property. Later work will adjust binman to generate an error when it is used. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-08-01 21:22:37 +00:00
offset = <CONFIG_SPL_PAD_TO>;
sunxi: Use binman for sunxi boards Move sunxi boards to use binman. This involves adding the image definition to the device tree and using it in the Makefile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26 03:16:01 +00:00
};
sunxi: Convert 64-bit boards to use binman At present 64-bit sunxi boards use the Makefile to create a FIT, using USE_SPL_FIT_GENERATOR. This is deprecated. Update sunxi to use binman instead. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-01 11:14:01 +00:00
#endif
sunxi: Use binman for sunxi boards Move sunxi boards to use binman. This involves adding the image definition to the device tree and using it in the Makefile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-11-26 03:16:01 +00:00
};
};
Reference in a new issue Copy permalink