u-boot/include/configs/synquacer.h

101 lines
2.5 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2016-2017 Socionext Inc.
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* Timers for fasp(TIMCLK) */
#define CONFIG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */
/*
* SDRAM (for initialize)
*/
#define CONFIG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */
#define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */
#define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */
#define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE
#define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */
/*
* Boot info
*/
#define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */
/*
* Hardware drivers support
*/
/* RTC */
#define CONFIG_SYS_I2C_RTC_ADDR 0x51
/* Serial (pl011) */
#define UART_CLK (62500000)
#define CONFIG_PL011_CLOCK UART_CLK
#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)}
/* Support MTD */
#define CONFIG_SYS_FLASH_BASE (0x08000000)
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_MAXARGS 128
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
/* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */
#define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \
"mtd nor1=u-boot.bin raw 200000 100000;" \
"fip.bin raw 180000 78000;" \
"optee.bin raw 500000 100000\0"
/* Distro boot settings */
#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_CMD_USB
#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
#else
#define BOOT_TARGET_DEVICE_USB(func)
#endif
#ifdef CONFIG_CMD_MMC
#define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0)
#else
#define BOOT_TARGET_DEVICE_MMC(func)
#endif
#ifdef CONFIG_CMD_NVME
#define BOOT_TARGET_DEVICE_NVME(func) func(NVME, nvme, 0)
#else
#define BOOT_TARGET_DEVICE_NVME(func)
#endif
#ifdef CONFIG_CMD_SCSI
#define BOOT_TARGET_DEVICE_SCSI(func) func(SCSI, scsi, 0) func(SCSI, scsi, 1)
#else
#define BOOT_TARGET_DEVICE_SCSI(func)
#endif
#define BOOT_TARGET_DEVICES(func) \
BOOT_TARGET_DEVICE_USB(func) \
BOOT_TARGET_DEVICE_MMC(func) \
BOOT_TARGET_DEVICE_SCSI(func) \
BOOT_TARGET_DEVICE_NVME(func) \
#include <config_distro_bootcmd.h>
#else /* CONFIG_SPL_BUILD */
#define BOOTENV
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_addr_r=0x9fe00000\0" \
"kernel_addr_r=0x90000000\0" \
"ramdisk_addr_r=0xa0000000\0" \
"scriptaddr=0x88000000\0" \
"pxefile_addr_r=0x88100000\0" \
DEFAULT_DFU_ALT_INFO \
BOOTENV
#endif /* __CONFIG_H */