Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 02:38:56 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/sifive/fu540/Kconfig

72 lines
1.1 KiB
Text
Raw Normal View History

riscv: Add SiFive FU540 board support This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-25 08:15:19 +00:00
if TARGET_SIFIVE_FU540
config SYS_BOARD
default "fu540"
config SYS_VENDOR
default "sifive"
config SYS_CPU
riscv: cpu: fu540: Add support for cpu fu540 Add SiFive fu540 cpu to support RISC-V arch Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29 06:03:34 +00:00
default "fu540"
riscv: Add SiFive FU540 board support This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-25 08:15:19 +00:00
config SYS_CONFIG_NAME
default "sifive-fu540"
config SYS_TEXT_BASE
riscv: sifive: fu540: add SPL configuration Add a support for SPL which will boot from L2 LIM (0x0800_0000) and then SPL will boot U-Boot FIT image (OpenSBI FW_DYNAMIC + u-boot.bin) from MMC boot devices. SPL related code is leveraged from FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29 06:03:35 +00:00
default 0x80200000 if SPL
riscv: Add SiFive FU540 board support This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-25 08:15:19 +00:00
default 0x80000000 if !RISCV_SMODE
default 0x80200000 if RISCV_SMODE
riscv: sifive: fu540: add SPL configuration Add a support for SPL which will boot from L2 LIM (0x0800_0000) and then SPL will boot U-Boot FIT image (OpenSBI FW_DYNAMIC + u-boot.bin) from MMC boot devices. SPL related code is leveraged from FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29 06:03:35 +00:00
config SPL_TEXT_BASE
default 0x08000000
config SPL_OPENSBI_LOAD_ADDR
default 0x80000000
riscv: Add SiFive FU540 board support This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-25 08:15:19 +00:00
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
riscv: sifive: fu540: add SPL configuration Add a support for SPL which will boot from L2 LIM (0x0800_0000) and then SPL will boot U-Boot FIT image (OpenSBI FW_DYNAMIC + u-boot.bin) from MMC boot devices. SPL related code is leveraged from FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29 06:03:35 +00:00
select SIFIVE_FU540
select SUPPORT_SPL
sifive: fu540: add ddr driver Add driver for fu540 to support ddr initialization in SPL. This driver is based on FSBL (https://github.com/sifive/freedom-u540-c000-bootloader.git) Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-05-29 06:03:26 +00:00
select RAM
select SPL_RAM if SPL
riscv: Add SiFive FU540 board support This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-25 08:15:19 +00:00
imply CMD_DHCP
imply CMD_EXT2
imply CMD_EXT4
imply CMD_FAT
imply CMD_FS_GENERIC
sifive: fu540: Add sample SD gpt partition layout This is a sample GPT partition layout for SD card, right now three important partitions are added to make the system bootable. partition layout: Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000022 0x00000821 "loader1" attrs: 0x0000000000000000 type: 5b193300-fc78-40cd-8002-e86c45580b47 guid: cbcbef44-e627-42bc-b134-93b6f3784b8c 2 0x00000822 0x00002821 "loader2" attrs: 0x0000000000000000 type: 2e54b353-1271-4842-806f-e436d6af6985 guid: f54eba28-d8de-4852-978d-1a673777e2ae 3 0x00002822 0x00020821 "rootfs" attrs: 0x0000000000000004 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 type: linux guid: 9561df46-8d55-4799-a83b-cfee9ef6ff93 Note: - loader1 would be fsbl or spl - loader2 would be U-Boot or U-Boot proper Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-05-29 06:03:36 +00:00
imply CMD_GPT
imply PARTITION_TYPE_GUID
riscv: Add SiFive FU540 board support This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-25 08:15:19 +00:00
imply CMD_NET
imply CMD_PING
sifive: fu540: Enable spi-nor flash support HiFive Unleashed A00 support is25wp256 spi-nor flash, So enable the same and add test result log for future reference. Tested on SiFive FU540 board. Thanks to Sagar for various use cases and tests. [QUAD mode in dt with spi-tx-bus-width: <4>] pp opcode = 0x34 [QUAD MODE] read opcode = 0x6c [QUAD MODE] erase opcode = 0x21 SPI-NOR: 1. erase entire flash: Pass 2. write entire flash: Pass 3. read entire flash: Pass 4. cmp 32MiB read back data: Pass 5. MMC: Booted Linux and dtb from mmc [SPI MODE in dt with spi-tx-bus-width: <1>] pp opcode = 0x12 [SPI MODE] read opcode = 0xc [SPI MODE] erase opcode = 0x21 SPI-NOR: 1. erase entire flash: Pass 2. write entire flash: Pass 3. read entire flash: Pass 4. cmp 32MiB read back data: Pass 5. MMC: Booted Linux and dtb from mmc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-29 15:33:53 +00:00
imply CMD_SF
riscv: Add SiFive FU540 board support This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-25 08:15:19 +00:00
imply CLK_SIFIVE
imply CLK_SIFIVE_FU540_PRCI
imply DOS_PARTITION
imply EFI_PARTITION
imply IP_DYN
imply ISO_PARTITION
imply MACB
imply MII
imply NET_RANDOM_ETHADDR
imply PHY_LIB
imply PHY_MSCC
imply SIFIVE_SERIAL
riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers This patch enables SiFive SPI and MMC SPI drivers for the SiFive Unleashed board. Signed-off-by: Bhargav Shah <bhargavshah1988@gmail.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-17 04:23:48 +00:00
imply SPI
imply SPI_SIFIVE
sifive: fu540: Enable spi-nor flash support HiFive Unleashed A00 support is25wp256 spi-nor flash, So enable the same and add test result log for future reference. Tested on SiFive FU540 board. Thanks to Sagar for various use cases and tests. [QUAD mode in dt with spi-tx-bus-width: <4>] pp opcode = 0x34 [QUAD MODE] read opcode = 0x6c [QUAD MODE] erase opcode = 0x21 SPI-NOR: 1. erase entire flash: Pass 2. write entire flash: Pass 3. read entire flash: Pass 4. cmp 32MiB read back data: Pass 5. MMC: Booted Linux and dtb from mmc [SPI MODE in dt with spi-tx-bus-width: <1>] pp opcode = 0x12 [SPI MODE] read opcode = 0xc [SPI MODE] erase opcode = 0x21 SPI-NOR: 1. erase entire flash: Pass 2. write entire flash: Pass 3. read entire flash: Pass 4. cmp 32MiB read back data: Pass 5. MMC: Booted Linux and dtb from mmc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Sagar Kadam <sagar.kadam@sifive.com>
2020-04-29 15:33:53 +00:00
imply SPI_FLASH
imply SPI_FLASH_ISSI
riscv: sifive: fu540: Enable SiFive SPI and MMC SPI drivers This patch enables SiFive SPI and MMC SPI drivers for the SiFive Unleashed board. Signed-off-by: Bhargav Shah <bhargavshah1988@gmail.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-17 04:23:48 +00:00
imply MMC
imply MMC_SPI
imply MMC_BROKEN_CD
imply CMD_MMC
configs: fu540: enable gpio driver Enable the DM based GPIO driver for FU540-C000 SoC. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-01 17:00:47 +00:00
imply DM_GPIO
imply SIFIVE_GPIO
imply CMD_GPIO
riscv: fu540: enable SMP Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-03-17 18:28:41 +00:00
imply SMP
riscv: sifive: fu540: Use OTP DM driver for serial environment variable Use the OTP DM driver to set the serial environment variable. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-29 06:03:22 +00:00
imply MISC
imply SIFIVE_OTP
riscv: sifive: fu540: Enable SiFive PWM driver This patch enables SiFive PWM driver for the SiFive Unleashed board. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-05-29 06:44:52 +00:00
imply DM_PWM
imply PWM_SIFIVE
riscv: Add SiFive FU540 board support This patch adds SiFive FU540 board support. For now, only SiFive serial, SiFive PRCI, and Cadance MACB drivers are only enabled. The SiFive FU540 defconfig by default builds U-Boot for S-Mode because U-Boot on SiFive FU540 will run in S-Mode as payload of BBL or OpenSBI. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-25 08:15:19 +00:00
endif
Reference in a new issue Copy permalink