Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-30 08:31:03 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/k2g_hs_evm_defconfig

70 lines
1.7 KiB
Text
Raw Normal View History

defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_ARM=y
CONFIG_ARCH_KEYSTONE=y
defconfig: k2x_hs_evm: Re-enable TI_SECURE_DEVICE in HS K2x parts These got removed in config re-syncs due to a Kconfig bug. Add these back here. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-02-14 17:53:39 +00:00
CONFIG_TI_SECURE_DEVICE=y
ti: keystone2: Move CONFIG_ISW_ENTRY_ADDR to a common place The ISW_ENTRY_ADDR Kconfig option under mach-omap2 isn't a SoC specific notion but rather "where is our previous stage loaded in memory?" option. Make use of this on ARCH_KEYSTONE rather than SPL_TEXT_BASE for our HS builds that are not using SPL anyhow. Cc: Vitaly Andrianov <vitalya@ti.com> Cc: Andrew F. Davis <afd@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com?
2019-03-19 11:14:37 +00:00
CONFIG_ISW_ENTRY_ADDR=0xC0A0000
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-03 17:10:38 +00:00
CONFIG_SYS_TEXT_BASE=0xC000060
configs: ks2: Enable TI_COMMON_CMD_OPTIONS Enable TI_COMMON_CMD_OPTIONS on all keystone2 platforms. Also sync with savedefconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-04-27 10:14:03 +00:00
CONFIG_TI_COMMON_CMD_OPTIONS=y
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19 13:47:40 +00:00
CONFIG_TARGET_K2G_EVM=y
configs: Re-sync with CONFIG_DISTRO_DEFAULTS A number of platforms include config_distro_defaults.h but do not enable CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and re-sync config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-10 21:54:38 +00:00
CONFIG_DISTRO_DEFAULTS=y
configs: Migrate CONFIG_NR_DRAM_BANKS We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 12:16:24 +00:00
CONFIG_NR_DRAM_BANKS=2
defconfig: k2x_hs_evm: Re-enable TI_SECURE_DEVICE in HS K2x parts These got removed in config re-syncs due to a Kconfig bug. Add these back here. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-02-14 17:53:39 +00:00
CONFIG_FIT_IMAGE_POST_PROCESS=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_OF_BOARD_SETUP=y
configs: Re-sync with CONFIG_DISTRO_DEFAULTS A number of platforms include config_distro_defaults.h but do not enable CONFIG_DISTRO_DEFAULTS. As they plainly intended to, set that flag and re-sync config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-10 21:54:38 +00:00
# CONFIG_USE_BOOTCOMMAND is not set
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
configs: k2g_hs_evm: Resync defconfig with non-HS defconfig Signed-off-by: Andrew F. Davis <afd@ti.com>
2018-03-22 20:44:38 +00:00
CONFIG_BOARD_EARLY_INIT_F=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
# CONFIG_CMD_FLASH is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
# CONFIG_CMD_GPIO is not set
configs: ks2: Enable TI_COMMON_CMD_OPTIONS Enable TI_COMMON_CMD_OPTIONS on all keystone2 platforms. Also sync with savedefconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-04-27 10:14:03 +00:00
# CONFIG_CMD_GPT is not set
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_CMD_REMOTEPROC=y
# CONFIG_CMD_SETEXPR is not set
Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-22 21:55:07 +00:00
CONFIG_MTDIDS_DEFAULT="nand0=davinci_nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=davinci_nand.0:1024k(bootloader)ro,512k(params)ro,-(ubifs)"
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03 19:26:12 +00:00
CONFIG_DEFAULT_DEVICE_TREE="keystone-k2g-evm"
configs: k2g_hs_evm: Resync defconfig with non-HS defconfig Signed-off-by: Andrew F. Davis <afd@ti.com>
2018-03-22 20:44:38 +00:00
CONFIG_OF_LIST="keystone-k2g-generic keystone-k2g-evm keystone-k2g-ice"
CONFIG_DTB_RESELECT=y
CONFIG_MULTI_DTB_FIT=y
Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
2018-04-01 16:37:53 +00:00
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_DM=y
# CONFIG_BLK is not set
configs: k2g_evm: Enable DFU on K2G EVM The K2G evm uses the generic DWC3 driver. DFU can thus be enabled. Enabling DFU for easier firmware update. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-04 10:13:01 +00:00
CONFIG_DFU_MMC=y
Convert CONFIG_SYS_I2C_DAVINCI to Kconfig This converts the following to Kconfig: CONFIG_SYS_I2C_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-08-10 10:05:22 +00:00
CONFIG_SYS_I2C_DAVINCI=y
usb: host: replace xhci-keystone driver by the generic dwc3 driver The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-04 10:13:00 +00:00
CONFIG_MISC=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
Convert CONFIG_NAND_DAVINCI to Kconfig This converts the following to Kconfig: CONFIG_NAND_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-08 11:43:36 +00:00
CONFIG_NAND=y
CONFIG_NAND_DAVINCI=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
Convert CONFIG_SF_DEFAULT_* to Kconfig This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:36 +00:00
CONFIG_SF_DEFAULT_BUS=1
CONFIG_SF_DEFAULT_SPEED=30000000
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
Move PHYLIB to Kconfig Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-02 00:19:59 +00:00
CONFIG_PHYLIB=y
treewide: Move CONFIG_PHY_MARVELL to Kconfig The CONFIG_PHY_MARVELL has already been migrated to Kconfig (some boards already had it in their Kconfig), but had not been moved for older boards. Move it to the defconfigs for all boards. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-04-27 12:52:21 +00:00
CONFIG_PHY_MARVELL=y
Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-02 00:20:00 +00:00
CONFIG_PHY_MICREL=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_DM_ETH=y
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-21 04:03:57 +00:00
CONFIG_MII=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-01-07 22:46:19 +00:00
CONFIG_DRIVER_TI_KEYSTONE_NET=y
usb: host: replace xhci-keystone driver by the generic dwc3 driver The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-04 10:13:00 +00:00
CONFIG_PHY=y
CONFIG_NOP_PHY=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_REMOTEPROC_TI_POWER=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
Convert CONFIG_SPI to Kconfig This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-15 17:51:26 +00:00
CONFIG_SPI=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_DM_SPI=y
Convert CONFIG_DAVINCI_SPI to Kconfig This converts the following to Kconfig: CONFIG_DAVINCI_SPI Signed-off-by: Adam Ford <aford173@gmail.com>
2017-12-30 13:33:42 +00:00
CONFIG_DAVINCI_SPI=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_USB=y
usb: host: replace xhci-keystone driver by the generic dwc3 driver The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-04 10:13:00 +00:00
CONFIG_DM_USB=y
configs: k2g_evm: Enable DFU on K2G EVM The K2G evm uses the generic DWC3 driver. DFU can thus be enabled. Enabling DFU for easier firmware update. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-04 10:13:01 +00:00
CONFIG_DM_USB_GADGET=y
defconfig: k2g_hs_evm: Add k2g_hs_evm_defconfig TI K2G secure devices have to be built with TI_SECURE_DEVICE, FIT, and FIT_IMAGE_POST_PROCESS enabled. Add a dedicated defconfig for this. Signed-off-by: Andrew F. Davis <afd@ti.com>
2017-04-07 15:00:11 +00:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
usb: host: replace xhci-keystone driver by the generic dwc3 driver The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-04 10:13:00 +00:00
CONFIG_USB_DWC3=y
configs: k2g_evm: Enable DFU on K2G EVM The K2G evm uses the generic DWC3 driver. DFU can thus be enabled. Enabling DFU for easier firmware update. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-04 10:13:01 +00:00
CONFIG_USB_DWC3_GADGET=y
usb: host: replace xhci-keystone driver by the generic dwc3 driver The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-04 10:13:00 +00:00
CONFIG_USB_DWC3_GENERIC=y
configs: k2g_evm: Enable DFU on K2G EVM The K2G evm uses the generic DWC3 driver. DFU can thus be enabled. Enabling DFU for easier firmware update. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-12-04 10:13:01 +00:00
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_SDP=y
Reference in a new issue Copy permalink