2008-07-25 18:31:05 +00:00
|
|
|
#
|
|
|
|
|
# Copyright 2008 Freescale Semiconductor.
|
|
|
|
|
#
|
|
|
|
|
# See file CREDITS for list of people who contributed to this
|
|
|
|
|
# project.
|
|
|
|
|
#
|
|
|
|
|
# This program is free software; you can redistribute it and/or
|
|
|
|
|
# modify it under the terms of the GNU General Public License as
|
|
|
|
|
# published by the Free Software Foundation; either version 2 of
|
|
|
|
|
# the License, or (at your option) any later version.
|
|
|
|
|
#
|
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
|
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
# GNU General Public License for more details.
|
|
|
|
|
#
|
|
|
|
|
# You should have received a copy of the GNU General Public License
|
|
|
|
|
# along with this program; if not, write to the Free Software
|
|
|
|
|
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
|
# MA 02111-1307 USA
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# mpc8536ds board
|
|
|
|
|
#
|
NAND boot: MPC8536DS support
MPC8536E can support booting from NAND flash which uses the
image u-boot-nand.bin. This image contains two parts: a 4K
NAND loader and a main U-Boot image. The former is appended
to the latter to produce u-boot-nand.bin. The 4K NAND loader
includes the corresponding nand_spl directory, along with the
code twisted by CONFIG_NAND_SPL. The main U-Boot image just
like a general U-Boot image except the parts that included by
CONFIG_SYS_RAMBOOT.
When power on, eLBC will automatically load from bank 0 the
4K NAND loader into the FCM buffer RAM where CPU can execute
the boot code directly. In the first stage, the NAND loader
copies itself to RAM or L2SRAM to free up the FCM buffer RAM,
then loads the main image from NAND flash to RAM or L2SRAM
and boot from it.
This patch implements the NAND loader to load the main image
into L2SRAM, so the main image can configure the RAM by using
SPD EEPROM. In the first stage, the NAND loader copies itself
to the second to last 4K address space, and uses the last 4K
address space as the initial RAM for stack.
Obviously, the size of L2SRAM shouldn't be less than the size
of the image used. If so, the workaround is to generate another
image that includes the code to configure the RAM by SPD and
load it to L2SRAM first, then relocate the main image to RAM
to boot up.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-23 07:20:37 +00:00
|
|
|
ifndef NAND_SPL
|
|
|
|
|
ifeq ($(CONFIG_MK_NAND), y)
|
|
|
|
|
TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
|
|
|
|
|
LDSCRIPT := $(TOPDIR)/cpu/$(CPU)/u-boot-nand.lds
|
|
|
|
|
endif
|
|
|
|
|
endif
|
|
|
|
|
|
On-chip ROM boot: MPC8536DS support
The MPC8536E is capable of booting from the on-chip ROM - boot from
eSDHC and boot from eSPI. When power on, the porcessor excutes the
ROM code to initialize the eSPI/eSDHC controller, and loads the mian
U-Boot image from the memory device that interfaced to the controller,
such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or
L2SRAM, then boot from it.
The memory device should contain a specific data structure with control
word and config word at the fixed address. The config word direct the
process how to config the memory device, and the control word direct
the processor where to find the image on the memory device, or where
copy the main image to. The user can use any method to store the data
structure to the memory device, only if store it on the assigned address.
The on-chip ROM code will map the whole 4GB address space by setting
entry0 in the TLB1, so the main image need to switch to Address space 1
to disable this mapping and map the address space again.
This patch implements loading the mian U-Boot image into L2SRAM, so
the image can configure the system memory by using SPD EEPROM.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-23 07:20:38 +00:00
|
|
|
ifeq ($(CONFIG_MK_SDCARD), y)
|
|
|
|
|
TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
|
|
|
|
|
RESET_VECTOR_ADDRESS = 0xf8fffffc
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifeq ($(CONFIG_MK_SPIFLASH), y)
|
|
|
|
|
TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
|
|
|
|
|
RESET_VECTOR_ADDRESS = 0xf8fffffc
|
|
|
|
|
endif
|
|
|
|
|
|
2008-07-25 18:31:05 +00:00
|
|
|
ifndef TEXT_BASE
|
|
|
|
|
TEXT_BASE = 0xeff80000
|
|
|
|
|
endif
|
2009-09-09 16:40:41 +00:00
|
|
|
|
On-chip ROM boot: MPC8536DS support
The MPC8536E is capable of booting from the on-chip ROM - boot from
eSDHC and boot from eSPI. When power on, the porcessor excutes the
ROM code to initialize the eSPI/eSDHC controller, and loads the mian
U-Boot image from the memory device that interfaced to the controller,
such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or
L2SRAM, then boot from it.
The memory device should contain a specific data structure with control
word and config word at the fixed address. The config word direct the
process how to config the memory device, and the control word direct
the processor where to find the image on the memory device, or where
copy the main image to. The user can use any method to store the data
structure to the memory device, only if store it on the assigned address.
The on-chip ROM code will map the whole 4GB address space by setting
entry0 in the TLB1, so the main image need to switch to Address space 1
to disable this mapping and map the address space again.
This patch implements loading the mian U-Boot image into L2SRAM, so
the image can configure the system memory by using SPD EEPROM.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-23 07:20:38 +00:00
|
|
|
ifndef RESET_VECTOR_ADDRESS
|
2009-09-09 16:40:41 +00:00
|
|
|
RESET_VECTOR_ADDRESS = 0xeffffffc
|
On-chip ROM boot: MPC8536DS support
The MPC8536E is capable of booting from the on-chip ROM - boot from
eSDHC and boot from eSPI. When power on, the porcessor excutes the
ROM code to initialize the eSPI/eSDHC controller, and loads the mian
U-Boot image from the memory device that interfaced to the controller,
such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or
L2SRAM, then boot from it.
The memory device should contain a specific data structure with control
word and config word at the fixed address. The config word direct the
process how to config the memory device, and the control word direct
the processor where to find the image on the memory device, or where
copy the main image to. The user can use any method to store the data
structure to the memory device, only if store it on the assigned address.
The on-chip ROM code will map the whole 4GB address space by setting
entry0 in the TLB1, so the main image need to switch to Address space 1
to disable this mapping and map the address space again.
This patch implements loading the mian U-Boot image into L2SRAM, so
the image can configure the system memory by using SPD EEPROM.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-23 07:20:38 +00:00
|
|
|
endif
|
