u-boot/board/atmel/sama5d2_ptc_ek/sama5d2_ptc_ek.c

131 lines
3.4 KiB
C
Raw Normal View History

/*
* Copyright (C) 2017 Microchip Corporation
* Wenyou Yang <wenyou.yang@microchip.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <debug_uart.h>
#include <dm.h>
#include <i2c.h>
#include <nand.h>
#include <version.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/atmel_pio4.h>
#include <asm/arch/atmel_mpddrc.h>
#include <asm/arch/atmel_sdhci.h>
#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
#include <asm/arch/sama5d2.h>
#include <asm/arch/sama5d2_smc.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_ATMEL
static void board_nand_hw_init(void)
{
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
at91_periph_clk_enable(ATMEL_ID_HSMC);
/* Configure SMC CS3 for NAND */
writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
&smc->cs[3].setup);
writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) |
AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3),
&smc->cs[3].pulse);
writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
&smc->cs[3].cycle);
writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) |
AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) |
AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3) |
AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
AT91_SMC_MODE_EXNW_DISABLE |
AT91_SMC_MODE_DBW_8 |
AT91_SMC_MODE_TDF_CYCLE(3),
&smc->cs[3].mode);
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 22, 0); /* D0 */
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 23, 0); /* D1 */
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 24, 0); /* D2 */
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 25, 0); /* D3 */
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 26, 0); /* D4 */
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 27, 0); /* D5 */
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 28, 0); /* D6 */
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 29, 0); /* D7 */
atmel_pio4_set_b_periph(AT91_PIO_PORTB, 2, 0); /* RE */
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 30, 0); /* WE */
atmel_pio4_set_b_periph(AT91_PIO_PORTA, 31, 1); /* NCS */
atmel_pio4_set_b_periph(AT91_PIO_PORTC, 8, 1); /* RDY */
atmel_pio4_set_b_periph(AT91_PIO_PORTB, 0, 1); /* ALE */
atmel_pio4_set_b_periph(AT91_PIO_PORTB, 1, 1); /* CLE */
}
#endif
static void board_usb_hw_init(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 12, 1);
}
#ifdef CONFIG_DEBUG_UART_BOARD_INIT
static void board_uart0_hw_init(void)
{
atmel_pio4_set_c_periph(AT91_PIO_PORTB, 26, 1); /* URXD0 */
atmel_pio4_set_c_periph(AT91_PIO_PORTB, 27, 0); /* UTXD0 */
at91_periph_clk_enable(ATMEL_ID_UART0);
}
void board_debug_uart_init(void)
{
board_uart0_hw_init();
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
#ifdef CONFIG_DEBUG_UART
debug_uart_init();
#endif
return 0;
}
#endif
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifdef CONFIG_NAND_ATMEL
board_nand_hw_init();
#endif
#ifdef CONFIG_CMD_USB
board_usb_hw_init();
#endif
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
#define AT24MAC_MAC_OFFSET 0xfa
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
#ifdef CONFIG_I2C_EEPROM
at91_set_ethaddr(AT24MAC_MAC_OFFSET);
#endif
return 0;
}
#endif