2018-05-06 21:58:06 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0+ */
|
2013-02-17 23:34:35 +00:00
|
|
|
/*
|
|
|
|
|
* (C) Copyright 2013
|
|
|
|
|
* Texas Instruments Incorporated.
|
|
|
|
|
* Lokesh Vutla <lokeshvutla@ti.com>
|
|
|
|
|
*
|
|
|
|
|
* Configuration settings for the TI DRA7XX board.
|
2013-12-06 20:30:19 +00:00
|
|
|
* See ti_omap5_common.h for omap5 common settings.
|
2013-02-17 23:34:35 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef __CONFIG_DRA7XX_EVM_H
|
|
|
|
|
#define __CONFIG_DRA7XX_EVM_H
|
|
|
|
|
|
2016-11-25 08:55:54 +00:00
|
|
|
#include <environment/ti/dfu.h>
|
|
|
|
|
|
2015-06-04 11:12:38 +00:00
|
|
|
#define CONFIG_IODELAY_RECALIBRATION
|
|
|
|
|
|
2016-03-08 03:48:07 +00:00
|
|
|
#define CONFIG_VERY_BIG_RAM
|
|
|
|
|
#define CONFIG_MAX_MEM_MAPPED 0x80000000
|
|
|
|
|
|
2014-04-03 11:52:56 +00:00
|
|
|
#ifndef CONFIG_QSPI_BOOT
|
2013-08-23 11:57:04 +00:00
|
|
|
/* MMC ENV related defines */
|
|
|
|
|
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
|
|
|
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
|
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
2014-04-03 11:52:56 +00:00
|
|
|
#endif
|
2013-02-17 23:34:35 +00:00
|
|
|
|
2013-10-04 18:52:02 +00:00
|
|
|
#if (CONFIG_CONS_INDEX == 1)
|
env: ti: boot: Use ttyS2 instead of ttyO2
ttyO2 console enables legacy CONFIG_SERIAL_OMAP driver in kernel.
Nowadays it's preferred to use the generic CONFIG_SERIAL_8250_OMAP
driver, which being enabled via ttyS2 console. Both drivers are enabled
in multi_v7_defconfig and in omap2plus_defconfig, for compatibility
reasons. Let's switch to ttyS2 console, to be sure that standard 8250
serial driver is used.
Similar behavior can be also achieved by enabling
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP option in kernel, but it's better not
to rely on that, as it can be disabled or removed after transitional
period.
Right now on DRA7/AM57x platforms the 8250-omap driver is being probed
first, and omap-serial driver is only probed if the first one failed.
It can be seen from uart3 definition in arch/arm/boot/dts/dra7-l4.dtsi:
compatible = "ti,dra742-uart", "ti,omap4-uart";
So the kernel already uses 8250 driver. This change basically allows
kernel developers to throw away the omap-serial driver and associated
compatibility options. Similar discussions [1,2] have started several
years ago, so it should be safe to do that now.
[1] https://patchwork.kernel.org/patch/6198471/
[2] http://processors.wiki.ti.com/index.php/Sitara_Linux_UART_-_Switching_to_8250_Driver
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Andrew F. Davis <afd@ti.com>
[trini: Update omap5_uevm]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-12 17:38:12 +00:00
|
|
|
#define CONSOLEDEV "ttyS0"
|
2013-10-04 18:52:02 +00:00
|
|
|
#elif (CONFIG_CONS_INDEX == 3)
|
env: ti: boot: Use ttyS2 instead of ttyO2
ttyO2 console enables legacy CONFIG_SERIAL_OMAP driver in kernel.
Nowadays it's preferred to use the generic CONFIG_SERIAL_8250_OMAP
driver, which being enabled via ttyS2 console. Both drivers are enabled
in multi_v7_defconfig and in omap2plus_defconfig, for compatibility
reasons. Let's switch to ttyS2 console, to be sure that standard 8250
serial driver is used.
Similar behavior can be also achieved by enabling
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP option in kernel, but it's better not
to rely on that, as it can be disabled or removed after transitional
period.
Right now on DRA7/AM57x platforms the 8250-omap driver is being probed
first, and omap-serial driver is only probed if the first one failed.
It can be seen from uart3 definition in arch/arm/boot/dts/dra7-l4.dtsi:
compatible = "ti,dra742-uart", "ti,omap4-uart";
So the kernel already uses 8250 driver. This change basically allows
kernel developers to throw away the omap-serial driver and associated
compatibility options. Similar discussions [1,2] have started several
years ago, so it should be safe to do that now.
[1] https://patchwork.kernel.org/patch/6198471/
[2] http://processors.wiki.ti.com/index.php/Sitara_Linux_UART_-_Switching_to_8250_Driver
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Andrew F. Davis <afd@ti.com>
[trini: Update omap5_uevm]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-12 17:38:12 +00:00
|
|
|
#define CONSOLEDEV "ttyS2"
|
2013-10-04 18:52:02 +00:00
|
|
|
#endif
|
|
|
|
|
#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
|
|
|
|
|
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
|
|
|
|
|
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
|
2013-05-30 03:19:38 +00:00
|
|
|
|
2017-05-17 09:25:10 +00:00
|
|
|
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
|
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
|
|
2013-05-30 03:19:38 +00:00
|
|
|
#define CONFIG_SYS_OMAP_ABE_SYSCK
|
2013-06-11 16:22:30 +00:00
|
|
|
|
2015-06-13 00:52:29 +00:00
|
|
|
#ifndef CONFIG_SPL_BUILD
|
2015-02-23 13:10:20 +00:00
|
|
|
#define DFUARGS \
|
|
|
|
|
"dfu_bufsiz=0x10000\0" \
|
|
|
|
|
DFU_ALT_INFO_MMC \
|
|
|
|
|
DFU_ALT_INFO_EMMC \
|
2015-10-20 09:52:01 +00:00
|
|
|
DFU_ALT_INFO_RAM \
|
|
|
|
|
DFU_ALT_INFO_QSPI
|
2015-06-13 00:52:29 +00:00
|
|
|
#endif
|
2015-03-24 22:34:50 +00:00
|
|
|
|
2016-07-28 12:09:18 +00:00
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
|
|
|
#undef CONFIG_CMD_BOOTD
|
2019-01-17 19:43:02 +00:00
|
|
|
#ifdef CONFIG_SPL_DFU
|
2016-07-28 12:09:18 +00:00
|
|
|
#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
|
|
|
|
|
#define DFUARGS \
|
|
|
|
|
"dfu_bufsiz=0x10000\0" \
|
|
|
|
|
DFU_ALT_INFO_RAM
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
|
2013-12-06 20:30:19 +00:00
|
|
|
#include <configs/ti_omap5_common.h>
|
2013-06-11 16:22:30 +00:00
|
|
|
|
2014-01-21 22:15:08 +00:00
|
|
|
/* Enhance our eMMC support / experience. */
|
2014-11-10 16:14:18 +00:00
|
|
|
#define CONFIG_HSMMC2_8BIT
|
2014-01-21 22:15:08 +00:00
|
|
|
|
2013-07-08 10:34:43 +00:00
|
|
|
/* CPSW Ethernet */
|
|
|
|
|
#define CONFIG_BOOTP_DNS2
|
|
|
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
2013-08-20 12:53:54 +00:00
|
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
2016-03-30 17:58:37 +00:00
|
|
|
#define CONFIG_PHY_TI
|
2013-07-08 10:34:43 +00:00
|
|
|
|
2014-04-03 11:52:56 +00:00
|
|
|
/*
|
|
|
|
|
* Default to using SPI for environment, etc.
|
2016-09-26 12:51:13 +00:00
|
|
|
* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
|
2014-04-03 11:52:56 +00:00
|
|
|
* 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
|
|
|
|
|
* 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
|
|
|
|
|
* 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
|
|
|
|
|
* 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
|
|
|
|
|
* 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
|
|
|
|
|
* 0x9E0000 - 0x2000000 : USERLAND
|
|
|
|
|
*/
|
|
|
|
|
#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
|
|
|
|
|
#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
|
|
|
|
|
#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
|
|
|
|
|
#if defined(CONFIG_QSPI_BOOT)
|
|
|
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
|
|
|
#define CONFIG_ENV_SIZE (64 << 10)
|
|
|
|
|
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */
|
|
|
|
|
#define CONFIG_ENV_OFFSET 0x1C0000
|
|
|
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x1D0000
|
|
|
|
|
#endif
|
|
|
|
|
|
2013-10-07 10:23:03 +00:00
|
|
|
/* SPI SPL */
|
|
|
|
|
|
2013-10-11 17:28:17 +00:00
|
|
|
/* USB xHCI HOST */
|
|
|
|
|
#define CONFIG_USB_XHCI_OMAP
|
|
|
|
|
|
|
|
|
|
#define CONFIG_OMAP_USB2PHY2_HOST
|
|
|
|
|
|
2013-11-11 14:56:44 +00:00
|
|
|
/* SATA */
|
|
|
|
|
#define CONFIG_SCSI_AHCI_PLAT
|
|
|
|
|
|
2014-07-22 10:33:23 +00:00
|
|
|
/* NAND support */
|
|
|
|
|
#ifdef CONFIG_NAND
|
|
|
|
|
/* NAND: device related configs */
|
|
|
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
|
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
|
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
|
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
|
|
|
|
CONFIG_SYS_NAND_PAGE_SIZE)
|
|
|
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
|
|
|
/* NAND: driver related configs */
|
|
|
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
|
|
|
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
|
|
|
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
|
|
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
|
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
|
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
|
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
|
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
|
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
|
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
2019-02-27 07:59:38 +00:00
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00140000
|
2014-07-22 10:33:23 +00:00
|
|
|
/* NAND: SPL related configs */
|
|
|
|
|
/* NAND: SPL falcon mode configs */
|
|
|
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
|
|
|
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
|
|
|
|
|
#endif
|
|
|
|
|
#endif /* !CONFIG_NAND */
|
|
|
|
|
|
2014-07-22 10:33:24 +00:00
|
|
|
/* Parallel NOR Support */
|
|
|
|
|
#if defined(CONFIG_NOR)
|
|
|
|
|
/* NOR: device related configs */
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
|
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
|
|
|
#define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */
|
|
|
|
|
/* #define CONFIG_INIT_IGNORE_ERROR */
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
|
|
|
#define CONFIG_SYS_FLASH_BASE (0x08000000)
|
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
|
|
|
/* Reduce SPL size by removing unlikey targets */
|
|
|
|
|
#ifdef CONFIG_NOR_BOOT
|
|
|
|
|
#define CONFIG_ENV_SECT_SIZE (128 * 1024) /* 128 KiB */
|
|
|
|
|
#define CONFIG_ENV_OFFSET 0x001c0000
|
|
|
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x001e0000
|
|
|
|
|
#endif
|
|
|
|
|
#endif /* NOR support */
|
|
|
|
|
|
2013-02-17 23:34:35 +00:00
|
|
|
#endif /* __CONFIG_DRA7XX_EVM_H */
|
