u-boot/drivers/pci/Makefile

#
# (C) Copyright 2000-2007
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier:	GPL-2.0+
#

obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
obj-$(CONFIG_PCI) += pci.o pci_auto.o pci_rom.o
obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o
obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o
obj-$(CONFIG_PCI_MSC01) += pci_msc01.o
obj-$(CONFIG_PCIE_IMX) += pcie_imx.o
obj-$(CONFIG_FTPCI100) += pci_ftpci100.o
obj-$(CONFIG_SH4_PCI) += pci_sh4.o
obj-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
obj-$(CONFIG_PCI_TEGRA) += pci_tegra.o
obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o
obj-$(CONFIG_WINBOND_83C553) += w83c553f.o
obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o
drivers/pci : move pci drivers to drivers/pci Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 2007-11-20 19:28:09 +00:00			`#`
			`# (C) Copyright 2000-2007`
			`# Wolfgang Denk, DENX Software Engineering, wd@denx.de.`
			`#`
Add GPL-2.0+ SPDX-License-Identifier to source files Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com> 2013-07-08 07:37:19 +00:00			`# SPDX-License-Identifier: GPL-2.0+`
drivers/pci : move pci drivers to drivers/pci Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 2007-11-20 19:28:09 +00:00			`#`

drivers: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 2013-10-17 08:34:57 +00:00			`obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o`
pci: Add general support for execution of video ROMs Some platforms don't have native code for dealing with their video hardware. In some cases they use a binary blob to set it up and perform required actions like setting the video mode. This approach is a hangover from the old PC days where a ROM was provided and executed during startup. Even now, these ROMs are supplied as a way to set up video. It avoids the code for every video chip needing to be provided in the boot loader. But it makes the video much less flexible - e.g. it is not possible to do anything else while the video init is happening (including waiting hundreds of milliseconds for display panels to start up). In any case, to deal with this sad state of affairs, provide an API for execution of x86 video ROMs, either natively or through emulation. Signed-off-by: Simon Glass <sjg@chromium.org> 2014-11-15 03:56:33 +00:00			`obj-$(CONFIG_PCI) += pci.o pci_auto.o pci_rom.o`
drivers: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 2013-10-17 08:34:57 +00:00			`obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o`
			`obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o`
malta: support for coreFPGA6 boards This patch adds support for running on Malta boards using coreFPGA6 core cards, including support for the msc01 system controller used with them. The system controller is detected at runtime allowing one U-boot binary to run on a Malta with either. Due to the PCI I/O base differing between Maltas using gt64120 & msc01 system controllers, the UART setup is modified slightly. A second UART is added so that there is one pointing at the correct address for each system controller. The Malta board then defines its own default_serial_console function to select the correct one at runtime. The incorrect UART will simply not function. Tested on: - A coreFPGA6 Malta running interAptiv and proAptiv bitstreams, both with and without an L2 cache. - QEMU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> 2013-11-08 11:18:50 +00:00			`obj-$(CONFIG_PCI_MSC01) += pci_msc01.o`
ARM: mx6: Add PCI express driver Add PCIe driver for the Freescale i.MX6 SoC . This driver operates the PCIe block in RC mode only, the EP mode is NOT supported. The driver is tested with the Intel e1000 NIC driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> 2013-12-14 04:55:28 +00:00			`obj-$(CONFIG_PCIE_IMX) += pcie_imx.o`
drivers: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 2013-10-17 08:34:57 +00:00			`obj-$(CONFIG_FTPCI100) += pci_ftpci100.o`
			`obj-$(CONFIG_SH4_PCI) += pci_sh4.o`
			`obj-$(CONFIG_SH7751_PCI) +=pci_sh7751.o`
			`obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o`
pci: tegra: Add Tegra PCIe driver Add support for the PCIe controller found on some generations of Tegra. Tegra20 has 2 root ports with a total of 4 lanes, Tegra30 has 3 root ports with a total of 6 lanes and Tegra124 has 2 root ports with a total of 5 lanes. This is based on the Linux kernel driver, originally submitted upstream by Mike Rapoport. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com> 2014-12-10 05:25:12 +00:00			`obj-$(CONFIG_PCI_TEGRA) += pci_tegra.o`
drivers: convert makefiles to Kbuild style Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 2013-10-17 08:34:57 +00:00			`obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o`
			`obj-$(CONFIG_WINBOND_83C553) += w83c553f.o`
arm: ls102xa: Update PCIe dts node status The patch changes PCIe dts node status to 'disabled' if the corresponding controller is disabled according to serdes protocol. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com> 2014-10-31 05:43:44 +00:00			`obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o`