Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-16 17:58:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs/stih410-b2260.h

48 lines
1.1 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0+ */
board: Add STMicroelectronics STiH410-B2260 support This is a 96Board compliant board based on STiH410 SoC: - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - SATA - HDMI - 2 x USB2.0 type A - 1 x USB2.0 type micro-AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:12 +00:00
/*
sti: fix STMicroelectronics copyright Uniformize all STMicroelectronics copyrights headers for STi related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-23 07:53:57 +00:00
* Copyright (C) 2017, STMicroelectronics - All Rights Reserved
treewide: Update email address Patrick Delaunay and Patrice Chotard Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-02 17:47:30 +00:00
* Author(s): Patrice Chotard, <patrice.chotard@foss.st.com> for STMicroelectronics.
board: Add STMicroelectronics STiH410-B2260 support This is a 96Board compliant board based on STiH410 SoC: - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - SATA - HDMI - 2 x USB2.0 type A - 1 x USB2.0 type micro-AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:12 +00:00
*/
#ifndef __CONFIG_H
#define __CONFIG_H
board: STiH410-B2260: Set SYS_BOOTM_LEN to 16M With recent kernel v4.18-rcx, uImage becomes bigger than 8MB. Set SYS_BOOTM_LEN to 16MB, this fix the following error message: "Fix Loading Kernel Image ... Image too large: increase CONFIG_SYS_BOOTM_LEN" Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-16 08:04:19 +00:00
#include <linux/sizes.h>
board: Add STMicroelectronics STiH410-B2260 support This is a 96Board compliant board based on STiH410 SoC: - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - SATA - HDMI - 2 x USB2.0 type A - 1 x USB2.0 type micro-AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:12 +00:00
/* ram memory-related information */
#define PHYS_SDRAM_1 0x40000000
global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-16 18:10:37 +00:00
#define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1
board: STiH410-B2260: fix sdram size 32MB are reserved for TrustZone purpose Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
2017-09-25 07:14:19 +00:00
#define PHYS_SDRAM_1_SIZE 0x3E000000
board: Add STMicroelectronics STiH410-B2260 support This is a 96Board compliant board based on STiH410 SoC: - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - SATA - HDMI - 2 x USB2.0 type A - 1 x USB2.0 type micro-AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:12 +00:00
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-16 18:10:41 +00:00
#define CFG_SYS_HZ_CLOCK 750000000 /* 750 MHz */
board: Add STMicroelectronics STiH410-B2260 support This is a 96Board compliant board based on STiH410 SoC: - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - SATA - HDMI - 2 x USB2.0 type A - 1 x USB2.0 type micro-AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:12 +00:00
/* Environment */
board: STiH410-B2260: update environment variable Update environment variable by updating: _ BOOT_TARGET_DEVICE _ CONFIGS_BOOTARGS _ kernel_addr_r, fdtfile, fdt_addr_r, scriptaddr, fdt_high, intird_high Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-25 07:14:18 +00:00
board: stih410-b2260: remove fdt_high and initrd_high Remove fdt_high and initrd_high as they shouldn't be used, this allows the fdt and initrd relocation. This implies to set CONFIG_SYS_BOOTMAPSZ to indicate the amount of memory available to contain kernel, device tree and initrd for relocation. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com>
2020-02-03 14:00:59 +00:00
/*
* For booting Linux, use the first 256 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-16 18:10:41 +00:00
#define CFG_SYS_BOOTMAPSZ SZ_256M
board: stih410-b2260: remove fdt_high and initrd_high Remove fdt_high and initrd_high as they shouldn't be used, this allows the fdt and initrd relocation. This implies to set CONFIG_SYS_BOOTMAPSZ to indicate the amount of memory available to contain kernel, device tree and initrd for relocation. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com>
2020-02-03 14:00:59 +00:00
board: STiH410-B2260: update environment variable Update environment variable by updating: _ BOOT_TARGET_DEVICE _ CONFIGS_BOOTARGS _ kernel_addr_r, fdtfile, fdt_addr_r, scriptaddr, fdt_high, intird_high Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-25 07:14:18 +00:00
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x40000000\0" \
"fdtfile=stih410-b2260.dtb\0" \
"fdt_addr_r=0x47000000\0" \
"scriptaddr=0x50000000\0" \
board: STiH410-B2260: Add pxefile_addr_r variable Reading doc/README.distro , we see platform needs to set pxefile_addr_r to support distro boot. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2018-05-24 14:15:26 +00:00
"pxefile_addr_r=0x50100000\0" \
board: STiH410-B2260: set ramdisk_addr_r to 0x48000000 Add missing ramdisk_addr_r param and set it to 0x48000000 Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-25 07:14:20 +00:00
"ramdisk_addr_r=0x48000000\0" \
board: STiH410-B2260: update environment variable Update environment variable by updating: _ BOOT_TARGET_DEVICE _ CONFIGS_BOOTARGS _ kernel_addr_r, fdtfile, fdt_addr_r, scriptaddr, fdt_high, intird_high Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-25 07:14:18 +00:00
BOOTENV
board: Add STMicroelectronics STiH410-B2260 support This is a 96Board compliant board based on STiH410 SoC: - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - SATA - HDMI - 2 x USB2.0 type A - 1 x USB2.0 type micro-AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:12 +00:00
/* Extra Commands */
STiH410-B2260: enable USB Host Networking Enable USB Host Networking support by enabling Ethernet/USB adaptors support and by enabling some BOOTP flags Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-05 09:04:22 +00:00
/* USB Configs */
/* NET Configs */
board: Add STMicroelectronics STiH410-B2260 support This is a 96Board compliant board based on STiH410 SoC: - 1GB DDR - On-Board USB combo WiFi/Bluetooth RTL8723BU with PCB soldered antenna - Ethernet 1000-BaseT - SATA - HDMI - 2 x USB2.0 type A - 1 x USB2.0 type micro-AB - SD card slot - High speed connector (SD/I2C/USB interfaces) - Low speed connector (UART/I2C/GPIO/SPI/PCM interfaces) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-21 12:37:12 +00:00
#endif /* __CONFIG_H */
Reference in a new issue Copy permalink