u-boot/board/st/nhk8815/nhk8815.c

93 lines
2 KiB
C
Raw Normal View History

/*
* (C) Copyright 2005
* STMicrolelctronics, <www.st.com>
*
* (C) Copyright 2004
* ARM Ltd.
* Philippe Robin, <philippe.robin@arm.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SHOW_BOOT_PROGRESS
void show_boot_progress(int progress)
{
printf("%i\n", progress);
}
#endif
/*
* Miscellaneous platform dependent initialisations
*/
int board_init(void)
{
gd->bd->bi_arch_number = MACH_TYPE_NOMADIK;
gd->bd->bi_boot_params = 0x00000100;
writel(0xC37800F0, NOMADIK_GPIO1_BASE + 0x20);
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x24);
writel(0x00000000, NOMADIK_GPIO1_BASE + 0x28);
writel(readl(NOMADIK_SRC_BASE) | 0x8000, NOMADIK_SRC_BASE);
/* Set up SMCS1 for Ethernet: sram-like, enabled, timing values */
writel(0x0000305b, REG_FSMC_BCR1);
writel(0x00033f33, REG_FSMC_BTR1);
/* Set up SMCS0 for OneNand: sram-like once again */
writel(0x000030db, NOMADIK_FSMC_BASE + 0x00); /* FSMC_BCR0 */
writel(0x02100551, NOMADIK_FSMC_BASE + 0x04); /* FSMC_BTR0 */
icache_enable();
return 0;
}
int board_late_init(void)
{
/* Set the two I2C gpio lines to be gpio high */
nmk_gpio_set(__SCL, 1); nmk_gpio_set(__SDA, 1);
nmk_gpio_dir(__SCL, 1); nmk_gpio_dir(__SDA, 1);
nmk_gpio_af(__SCL, GPIO_GPIO); nmk_gpio_af(__SDA, GPIO_GPIO);
/* Reset the I2C port expander, on GPIO77 */
nmk_gpio_af(77, GPIO_GPIO);
nmk_gpio_dir(77, 1);
nmk_gpio_set(77, 0);
udelay(10);
nmk_gpio_set(77, 1);
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC91111
rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
#endif
return rc;
}
#endif