u-boot/configs/A20-Olimex-SOM-EVB_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=480
CONFIG_MMC0_CD_PIN="PH1"
CONFIG_MMC3_CD_PIN="PH0"
CONFIG_MMC3_PINS="PH"
CONFIG_MMC_SUNXI_SLOT_EXTRA=3
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_USB0_VBUS_DET="PH5"
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_USB_EHCI_HCD=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-08-26 18:38:33 +00:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
			`CONFIG_MACH_SUN7I=y`
			`CONFIG_DRAM_CLK=480`
			`CONFIG_MMC0_CD_PIN="PH1"`
sunxi: A20-Olimex-SOM-EVB defconfig: enable mmc3 The Olimex A20-SOM-EVB is an evaluation board for the Olimex A20-SOM system-on-module. The baseboard provides a full-size SD socket (connected to mmc3) in addition to the micro-SD socket on the SOM itself (which is connected to mmc0). Enable the mmc3 controller in the board defconfig. Signed-off-by: Karsten Merker <merker@debian.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-12-16 19:59:39 +00:00			`CONFIG_MMC3_CD_PIN="PH0"`
			`CONFIG_MMC3_PINS="PH"`
			`CONFIG_MMC_SUNXI_SLOT_EXTRA=3`
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-08-26 18:38:33 +00:00			`CONFIG_USB0_VBUS_PIN="PB9"`
			`CONFIG_USB0_VBUS_DET="PH5"`
			`CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"`
			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
			`CONFIG_SPL=y`
sunxi: Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER Kconfig-ify CONFIG_AXP152_POWER and _AXP209_POWER settings, removing them from CONFIG_SYS_EXTRA_OPTIONS. Note that sun5i boards can have either an AXP209 or an AXP152 pmic, the Kconfig default is AXP209, boards with an AXP152 must explicitly select this. Likewise boards without a pmic must explicitly select SUNXI_NO_PMIC in their defconfig. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> 2015-09-30 13:12:30 +00:00			`CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"`
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-08-26 18:38:33 +00:00			`# CONFIG_CMD_IMLS is not set`
			`# CONFIG_CMD_FLASH is not set`
			`# CONFIG_CMD_FPGA is not set`
sunxi: A20-Olimex-SOM-EVB: Force 8211CL to master Force master mode for 1000BASE-T operation on the A20-Olimex-SOM-EVB. Karsten Merker reports that this change is necessary to get a reliable link at gigabit speeds. Signed-off-by: Michael Haas <haas@computerlinguist.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-03-25 17:22:51 +00:00			`CONFIG_RTL8211X_PHY_FORCE_MASTER=y`
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-08-26 18:38:33 +00:00			`CONFIG_ETH_DESIGNWARE=y`
			`CONFIG_USB_EHCI_HCD=y`
sunxi: Olimex A20 boards: Enable LDO3 and LDO4 regulators Sets LDO3 and LDO4 regulators at 2.8V. In the current config these are off. This causes kernel to hang during axp209 initialization. Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-05-23 06:49:47 +00:00			`CONFIG_AXP_ALDO3_VOLT=2800`
			`CONFIG_AXP_ALDO4_VOLT=2800`