u-boot/include/configs/p2371-2180.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2013-2015
 * NVIDIA Corporation <www.nvidia.com>
 */

#ifndef _P2371_2180_H
#define _P2371_2180_H

#include <linux/sizes.h>

#include "tegra210-common.h"

/* High-level configuration options */
#define CONFIG_TEGRA_BOARD_STRING	"NVIDIA P2371-2180"

/* Board-specific serial config */
#define CONFIG_TEGRA_ENABLE_UARTA

/* Environment in eMMC, at the end of 2nd "boot sector" */

/* SPI */
#define CONFIG_SPI_FLASH_SIZE		(4 << 20)

#include "tegra-common-post.h"

/* Crystal is 38.4MHz. clk_m runs at half that rate */
#define COUNTER_FREQUENCY	19200000

#endif /* _P2371_2180_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
ARM: tegra: Add p2371-2180 board P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 2015-08-14 04:34:22 +00:00			`/*`
			`* (C) Copyright 2013-2015`
			`* NVIDIA Corporation <www.nvidia.com>`
			`*/`

			`#ifndef _P2371_2180_H`
			`#define _P2371_2180_H`

			`#include <linux/sizes.h>`

			`#include "tegra210-common.h"`

			`/* High-level configuration options */`
			`#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-2180"`

			`/* Board-specific serial config */`
			`#define CONFIG_TEGRA_ENABLE_UARTA`

			`/* Environment in eMMC, at the end of 2nd "boot sector" */`

			`/* SPI */`
			`#define CONFIG_SPI_FLASH_SIZE (4 << 20)`

			`#include "tegra-common-post.h"`

ARM: tegra: fix COUNTER_FREQUENCY for T210 While T210 boards all have 38.4MHz crystals, per the TRM, the only supported configuration is to divide the crystal frequency by 2 to generate clk_m, which is what feeds the ARM generic timers amongst other things. Fix the value of COUNTER_FREQUENCY to reflect this divide-by-2. When I queried the 19.2 value in Tom's original T210 patches, I wasn't aware of this extra divide-by-2, and didn't notice any effect from the incorrect value, since its only used if U-Boot is booted in EL3, whereas I'm booting it in EL2. Reported-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 2015-08-19 21:15:41 +00:00			`/* Crystal is 38.4MHz. clk_m runs at half that rate */`
			`#define COUNTER_FREQUENCY 19200000`
ARM: tegra: Add p2371-2180 board P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 2015-08-14 04:34:22 +00:00
			`#endif /* _P2371_2180_H */`