u-boot/include/configs/am57xx_evm.h

131 lines
4 KiB
C
Raw Normal View History

/*
* (C) Copyright 2014
* Texas Instruments Incorporated.
* Felipe Balbi <balbi@ti.com>
*
* Configuration settings for the TI Beagle x15 board.
* See ti_omap5_common.h for omap5 common settings.
*
* SPDX-License-Identifier: GPL-2.0+
*/
board: ti: beagle_x15: Rename to indicate support for TI am57xx evms BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm). Information about the TI AM57xx EVM can be found here http://www.ti.com/tool/tmdxevm5728 The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering. Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base. NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts. As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-29 21:50:43 +00:00
#ifndef __CONFIG_AM57XX_EVM_H
#define __CONFIG_AM57XX_EVM_H
#include <environment/ti/dfu.h>
#include <linux/sizes.h>
#ifdef CONFIG_SPL_BUILD
#define CONFIG_IODELAY_RECALIBRATION
#endif
#define CONFIG_NR_DRAM_BANKS 2
/* MMC ENV related defines */
#define CONFIG_SYS_MMC_ENV_DEV 1 /* eMMC */
#define CONFIG_SYS_MMC_ENV_PART 0
#define CONFIG_ENV_SIZE SZ_128K
#define CONFIG_ENV_OFFSET 0x260000
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONSOLEDEV "ttyO2"
#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
#define CONFIG_ENV_EEPROM_IS_ON_I2C
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_OMAP_ABE_SYSCK
/* Define the default GPT table for eMMC */
#define PARTS_DEFAULT \
/* Linux partitions */ \
"uuid_disk=${uuid_gpt_disk};" \
arm: am57xx: Fix Linux boot from eMMC Right now on OMAP5-based boards we have only one partition defined for Linux boot, which is rootfs. That doesn't work with bootpart=1:2 (that is defined in include/environment/ti/boot.h). To fix Linux boot we may either: 1. Change bootpart to be 1:1 2. Or add preceding partition, so that rootfs is actually 1:2 Second choice seems more reasonable, as DFU is already using similar partition table and can rely on bootpart to be 1:2. This patch adds "bootloader" partition. So now eMMC layout for Linux boot looks like this: offset content size partition (KiB) (KiB) Reviewed-by: Tom Rini <trini@konsulko.com> ======================================================================= 0 +--------------------------------+ | MBR/GPT header | 128 - 128 +--------------------------------+ | MLO | 256 - 384 +--------------------------------+ | u-boot.img | 1792 bootloader 2176 +--------------------------------+ | //////////// hole //////////// | 256 - 2432 +--------------------------------+ | U-Boot environment | 128 - 2560 +--------------------------------+ | U-Boot environment (redundant) | 128 - 2688 +--------------------------------+ | rootfs | remaining rootfs end +--------------------------------+ ======================================================================= Guard hole appears because U-Boot environment offset was calculated for Android partition table, which has two additional partitions in place of that hole ("environment" and "misc" partitions). This patch also changes rootfs offset from 2 MiB further to 2688 KiB, so that there won't be any collisions with U-Boot environment when we flash rootfs. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2017-09-21 19:37:56 +00:00
"name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \
"name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \
/* Android partitions */ \
"partitions_android=" \
"uuid_disk=${uuid_gpt_disk};" \
"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
"name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
"name=environment,size=128K,uuid=${uuid_gpt_environment};" \
"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
"name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
"name=efs,size=16M,uuid=${uuid_gpt_efs};" \
"name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
"name=recovery,size=40M,uuid=${uuid_gpt_recovery};" \
"name=boot,size=10M,uuid=${uuid_gpt_boot};" \
"name=system,size=768M,uuid=${uuid_gpt_system};" \
"name=vendor,size=256M,uuid=${uuid_gpt_vendor};" \
"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
"name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
"name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
"name=userdata,size=-,uuid=${uuid_gpt_userdata}"
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
DFU_ALT_INFO_MMC \
DFU_ALT_INFO_EMMC \
DFU_ALT_INFO_RAM \
#include <configs/ti_omap5_common.h>
/* Enhance our eMMC support / experience. */
#define CONFIG_HSMMC2_8BIT
/* CPSW Ethernet */
#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT 10
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
#define CONFIG_MII /* Required in net/eth.c */
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
#define CONFIG_SUPPORT_EMMC_BOOT
/* USB xHCI HOST */
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB3PHY1_HOST
/* SATA */
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
/*
* Default to using SPI for environment, etc.
* 0x000000 - 0x040000 : QSPI.SPL (256KiB)
* 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
* 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
* 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
* 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
* 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
* 0x9E0000 - 0x2000000 : USERLAND
*/
#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
/* SPI SPL */
#define CONFIG_TI_EDMA3
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
/* SPI */
#define CONFIG_TI_SPI_MMAP
#define CONFIG_SF_DEFAULT_SPEED 76800000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_QSPI_QUAD_SUPPORT
board: ti: beagle_x15: Rename to indicate support for TI am57xx evms BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm). Information about the TI AM57xx EVM can be found here http://www.ti.com/tool/tmdxevm5728 The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering. Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base. NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts. As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-10-29 21:50:43 +00:00
#endif /* __CONFIG_AM57XX_EVM_H */