mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
54 lines
2 KiB
C
54 lines
2 KiB
C
|
/**
|
||
|
|
* Copyright 2011 Freescale Semiconductor
|
||
|
|
* Author: Mingkai Hu <Mingkai.hu@freescale.com>
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify it
|
||
|
|
* under the terms of the GNU General Public License as published by the Free
|
||
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
||
|
|
* any later version.
|
||
|
|
*
|
||
|
|
* This file provides support for the ngPIXIS, a board-specific FPGA used on
|
||
|
|
* some Freescale reference boards.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* CPLD register set. Feel free to add board-specific #ifdefs where necessary.
|
||
|
|
*/
|
||
|
|
typedef struct cpld_data {
|
||
|
|
u8 cpld_ver; /* 0x0 - CPLD Major Revision Register */
|
||
|
|
u8 cpld_ver_sub; /* 0x1 - CPLD Minor Revision Register */
|
||
|
|
u8 pcba_ver; /* 0x2 - PCBA Revision Register */
|
||
|
|
u8 system_rst; /* 0x3 - system reset register */
|
||
|
|
u8 wd_cfg; /* 0x4 - Watchdog Period Setting Register */
|
||
|
|
u8 sw_ctl_on; /* 0x5 - Switch Control Enable Register */
|
||
|
|
u8 por_cfg; /* 0x6 - POR Control Register */
|
||
|
|
u8 switch_strobe; /* 0x7 - Multiplexed pin Select Register */
|
||
|
|
u8 jtag_sel; /* 0x8 - JTAG or AURORA Selection */
|
||
|
|
u8 sdbank1_clk; /* 0x9 - SerDes Bank1 Reference clock */
|
||
|
|
u8 sdbank2_clk; /* 0xa - SerDes Bank2 Reference clock */
|
||
|
|
u8 fbank_sel; /* 0xb - Flash bank selection */
|
||
|
|
u8 serdes_mux; /* 0xc - Multiplexed pin Select Register */
|
||
|
|
u8 sw[1]; /* 0xd - SW2 Status */
|
||
|
|
} __attribute__ ((packed)) cpld_data_t;
|
||
|
|
|
||
|
|
#define SERDES_MUX_LANE_6_MASK 0x2
|
||
|
|
#define SERDES_MUX_LANE_6_SHIFT 1
|
||
|
|
#define SERDES_MUX_LANE_A_MASK 0x1
|
||
|
|
#define SERDES_MUX_LANE_A_SHIFT 0
|
||
|
|
#define SERDES_MUX_LANE_C_MASK 0x4
|
||
|
|
#define SERDES_MUX_LANE_C_SHIFT 2
|
||
|
|
#define SERDES_MUX_LANE_D_MASK 0x8
|
||
|
|
#define SERDES_MUX_LANE_D_SHIFT 3
|
||
|
|
|
||
|
|
/* Pointer to the CPLD register set */
|
||
|
|
#define cpld ((cpld_data_t *)CPLD_BASE)
|
||
|
|
|
||
|
|
/* The CPLD SW register that corresponds to board switch X, where x >= 1 */
|
||
|
|
#define CPLD_SW(x) (cpld->sw[(x) - 2])
|
||
|
|
|
||
|
|
u8 cpld_read(unsigned int reg);
|
||
|
|
void cpld_write(unsigned int reg, u8 value);
|
||
|
|
|
||
|
|
#define CPLD_READ(reg) cpld_read(offsetof(cpld_data_t, reg))
|
||
|
|
#define CPLD_WRITE(reg, value) cpld_write(offsetof(cpld_data_t, reg), value)
|