u-boot/drivers/usb/musb/musb_core.h

344 lines
8.9 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/******************************************************************
* Copyright 2008 Mentor Graphics Corporation
* Copyright (C) 2008 by Texas Instruments
*
* This file is part of the Inventra Controller Driver for Linux.
******************************************************************/
#ifndef __MUSB_HDRC_DEFS_H__
#define __MUSB_HDRC_DEFS_H__
#include <usb_defs.h>
#include <asm/io.h>
#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
/* EP0 */
struct musb_ep0_regs {
u16 reserved4;
u16 csr0;
u16 reserved5;
u16 reserved6;
u16 count0;
u8 host_type0;
u8 host_naklimit0;
u8 reserved7;
u8 reserved8;
u8 reserved9;
u8 configdata;
};
/* EP 1-15 */
struct musb_epN_regs {
u16 txmaxp;
u16 txcsr;
u16 rxmaxp;
u16 rxcsr;
u16 rxcount;
u8 txtype;
u8 txinterval;
u8 rxtype;
u8 rxinterval;
u8 reserved0;
u8 fifosize;
};
/* Mentor USB core register overlay structure */
#ifndef musb_regs
struct musb_regs {
/* common registers */
u8 faddr;
u8 power;
u16 intrtx;
u16 intrrx;
u16 intrtxe;
u16 intrrxe;
u8 intrusb;
u8 intrusbe;
u16 frame;
u8 index;
u8 testmode;
/* indexed registers */
u16 txmaxp;
u16 txcsr;
u16 rxmaxp;
u16 rxcsr;
u16 rxcount;
u8 txtype;
u8 txinterval;
u8 rxtype;
u8 rxinterval;
u8 reserved0;
u8 fifosize;
/* fifo */
u32 fifox[16];
/* OTG, dynamic FIFO, version & vendor registers */
u8 devctl;
u8 reserved1;
u8 txfifosz;
u8 rxfifosz;
u16 txfifoadd;
u16 rxfifoadd;
u32 vcontrol;
u16 hwvers;
u16 reserved2a[1];
u8 ulpi_busctl;
u8 reserved2b[1];
u16 reserved2[3];
u8 epinfo;
u8 raminfo;
u8 linkinfo;
u8 vplen;
u8 hseof1;
u8 fseof1;
u8 lseof1;
u8 reserved3;
/* target address registers */
struct musb_tar_regs {
u8 txfuncaddr;
u8 reserved0;
u8 txhubaddr;
u8 txhubport;
u8 rxfuncaddr;
u8 reserved1;
u8 rxhubaddr;
u8 rxhubport;
} tar[16];
/*
* endpoint registers
* ep0 elements are valid when array index is 0
* otherwise epN is valid
*/
union musb_ep_regs {
struct musb_ep0_regs ep0;
struct musb_epN_regs epN;
} ep[16];
} __attribute__((packed));
#endif
/*
* MUSB Register bits
*/
/* POWER */
#define MUSB_POWER_ISOUPDATE 0x80
#define MUSB_POWER_SOFTCONN 0x40
#define MUSB_POWER_HSENAB 0x20
#define MUSB_POWER_HSMODE 0x10
#define MUSB_POWER_RESET 0x08
#define MUSB_POWER_RESUME 0x04
#define MUSB_POWER_SUSPENDM 0x02
#define MUSB_POWER_ENSUSPEND 0x01
#define MUSB_POWER_HSMODE_SHIFT 4
/* INTRUSB */
#define MUSB_INTR_SUSPEND 0x01
#define MUSB_INTR_RESUME 0x02
#define MUSB_INTR_RESET 0x04
#define MUSB_INTR_BABBLE 0x04
#define MUSB_INTR_SOF 0x08
#define MUSB_INTR_CONNECT 0x10
#define MUSB_INTR_DISCONNECT 0x20
#define MUSB_INTR_SESSREQ 0x40
#define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */
/* DEVCTL */
#define MUSB_DEVCTL_BDEVICE 0x80
#define MUSB_DEVCTL_FSDEV 0x40
#define MUSB_DEVCTL_LSDEV 0x20
#define MUSB_DEVCTL_VBUS 0x18
#define MUSB_DEVCTL_VBUS_SHIFT 3
#define MUSB_DEVCTL_HM 0x04
#define MUSB_DEVCTL_HR 0x02
#define MUSB_DEVCTL_SESSION 0x01
/* ULPI VBUSCONTROL */
#define ULPI_USE_EXTVBUS 0x01
#define ULPI_USE_EXTVBUSIND 0x02
/* TESTMODE */
#define MUSB_TEST_FORCE_HOST 0x80
#define MUSB_TEST_FIFO_ACCESS 0x40
#define MUSB_TEST_FORCE_FS 0x20
#define MUSB_TEST_FORCE_HS 0x10
#define MUSB_TEST_PACKET 0x08
#define MUSB_TEST_K 0x04
#define MUSB_TEST_J 0x02
#define MUSB_TEST_SE0_NAK 0x01
/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
#define MUSB_FIFOSZ_DPB 0x10
/* Allocation size (8, 16, 32, ... 4096) */
#define MUSB_FIFOSZ_SIZE 0x0f
/* CSR0 */
#define MUSB_CSR0_FLUSHFIFO 0x0100
#define MUSB_CSR0_TXPKTRDY 0x0002
#define MUSB_CSR0_RXPKTRDY 0x0001
/* CSR0 in Peripheral mode */
#define MUSB_CSR0_P_SVDSETUPEND 0x0080
#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
#define MUSB_CSR0_P_SENDSTALL 0x0020
#define MUSB_CSR0_P_SETUPEND 0x0010
#define MUSB_CSR0_P_DATAEND 0x0008
#define MUSB_CSR0_P_SENTSTALL 0x0004
/* CSR0 in Host mode */
#define MUSB_CSR0_H_DIS_PING 0x0800
#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */
#define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */
#define MUSB_CSR0_H_NAKTIMEOUT 0x0080
#define MUSB_CSR0_H_STATUSPKT 0x0040
#define MUSB_CSR0_H_REQPKT 0x0020
#define MUSB_CSR0_H_ERROR 0x0010
#define MUSB_CSR0_H_SETUPPKT 0x0008
#define MUSB_CSR0_H_RXSTALL 0x0004
/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
#define MUSB_CSR0_P_WZC_BITS \
(MUSB_CSR0_P_SENTSTALL)
#define MUSB_CSR0_H_WZC_BITS \
(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
| MUSB_CSR0_RXPKTRDY)
/* TxType/RxType */
#define MUSB_TYPE_SPEED 0xc0
#define MUSB_TYPE_SPEED_SHIFT 6
#define MUSB_TYPE_SPEED_HIGH 1
#define MUSB_TYPE_SPEED_FULL 2
#define MUSB_TYPE_SPEED_LOW 3
#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
#define MUSB_TYPE_PROTO_SHIFT 4
#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */
#define MUSB_TYPE_PROTO_BULK 2
#define MUSB_TYPE_PROTO_INTR 3
/* CONFIGDATA */
#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
#define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */
#define MUSB_CONFIGDATA_BIGENDIAN 0x20
#define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
#define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
#define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */
#define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
#define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */
/* TXCSR in Peripheral and Host mode */
#define MUSB_TXCSR_AUTOSET 0x8000
#define MUSB_TXCSR_MODE 0x2000
#define MUSB_TXCSR_DMAENAB 0x1000
#define MUSB_TXCSR_FRCDATATOG 0x0800
#define MUSB_TXCSR_DMAMODE 0x0400
#define MUSB_TXCSR_CLRDATATOG 0x0040
#define MUSB_TXCSR_FLUSHFIFO 0x0008
#define MUSB_TXCSR_FIFONOTEMPTY 0x0002
#define MUSB_TXCSR_TXPKTRDY 0x0001
/* TXCSR in Peripheral mode */
#define MUSB_TXCSR_P_ISO 0x4000
#define MUSB_TXCSR_P_INCOMPTX 0x0080
#define MUSB_TXCSR_P_SENTSTALL 0x0020
#define MUSB_TXCSR_P_SENDSTALL 0x0010
#define MUSB_TXCSR_P_UNDERRUN 0x0004
/* TXCSR in Host mode */
#define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200
#define MUSB_TXCSR_H_DATATOGGLE 0x0100
#define MUSB_TXCSR_H_NAKTIMEOUT 0x0080
#define MUSB_TXCSR_H_RXSTALL 0x0020
#define MUSB_TXCSR_H_ERROR 0x0004
#define MUSB_TXCSR_H_DATATOGGLE_SHIFT 8
/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
#define MUSB_TXCSR_P_WZC_BITS \
(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
#define MUSB_TXCSR_H_WZC_BITS \
(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
/* RXCSR in Peripheral and Host mode */
#define MUSB_RXCSR_AUTOCLEAR 0x8000
#define MUSB_RXCSR_DMAENAB 0x2000
#define MUSB_RXCSR_DISNYET 0x1000
#define MUSB_RXCSR_PID_ERR 0x1000
#define MUSB_RXCSR_DMAMODE 0x0800
#define MUSB_RXCSR_INCOMPRX 0x0100
#define MUSB_RXCSR_CLRDATATOG 0x0080
#define MUSB_RXCSR_FLUSHFIFO 0x0010
#define MUSB_RXCSR_DATAERROR 0x0008
#define MUSB_RXCSR_FIFOFULL 0x0002
#define MUSB_RXCSR_RXPKTRDY 0x0001
/* RXCSR in Peripheral mode */
#define MUSB_RXCSR_P_ISO 0x4000
#define MUSB_RXCSR_P_SENTSTALL 0x0040
#define MUSB_RXCSR_P_SENDSTALL 0x0020
#define MUSB_RXCSR_P_OVERRUN 0x0004
/* RXCSR in Host mode */
#define MUSB_RXCSR_H_AUTOREQ 0x4000
#define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400
#define MUSB_RXCSR_H_DATATOGGLE 0x0200
#define MUSB_RXCSR_H_RXSTALL 0x0040
#define MUSB_RXCSR_H_REQPKT 0x0020
#define MUSB_RXCSR_H_ERROR 0x0004
#define MUSB_S_RXCSR_H_DATATOGGLE 9
/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
#define MUSB_RXCSR_P_WZC_BITS \
(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
| MUSB_RXCSR_RXPKTRDY)
#define MUSB_RXCSR_H_WZC_BITS \
(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
/* HUBADDR */
#define MUSB_HUBADDR_MULTI_TT 0x80
/* Endpoint configuration information. Note: The value of endpoint fifo size
* element should be either 8,16,32,64,128,256,512,1024,2048 or 4096. Other
* values are not supported
*/
struct musb_epinfo {
u8 epnum; /* endpoint number */
u8 epdir; /* endpoint direction */
u16 epsize; /* endpoint FIFO size */
};
/*
* Platform specific MUSB configuration. Any platform using the musb
* functionality should create one instance of this structure in the
* platform specific file.
*/
struct musb_config {
struct musb_regs *regs;
u32 timeout;
u8 musb_speed;
u8 extvbus;
};
/* externally defined data */
extern struct musb_config musb_cfg;
extern struct musb_regs *musbr;
/* exported functions */
extern void musb_start(void);
extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt);
extern void write_fifo(u8 ep, u32 length, void *fifo_data);
extern void read_fifo(u8 ep, u32 length, void *fifo_data);
static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
{
return readb(&musbr->ulpi_busctl);
}
static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val)
{
writeb(val, &musbr->ulpi_busctl);
}
#endif /* __MUSB_HDRC_DEFS_H__ */