u-boot/board/gdsys/mpc8308/Makefile

#
# (C) Copyright 2014
# Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
#
# SPDX-License-Identifier:	GPL-2.0+
#

obj-y := mpc8308.o sdram.o
obj-$(CONFIG_HRCON) += hrcon.o
obj-$(CONFIG_STRIDER) += strider.o
mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de> 2014-11-13 18:21:18 +00:00			`#`
			`# (C) Copyright 2014`
			`# Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de`
			`#`
			`# SPDX-License-Identifier: GPL-2.0+`
			`#`

			`obj-y := mpc8308.o sdram.o`
			`obj-$(CONFIG_HRCON) += hrcon.o`
mpc83xx: Add strider board The gdsys strider board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x 10/100 Mbit/s Ethernet (optional) - Lattice ECP3 FPGA connected via eLBC Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> [trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now] Signed-off-by: Tom Rini <trini@konsulko.com> 2015-10-28 10:46:32 +00:00			`obj-$(CONFIG_STRIDER) += strider.o`