u-boot/board/etx094/etx094.c

387 lines
9.8 KiB
C
Raw Normal View History

2002-08-26 21:58:50 +00:00
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8xx.h>
DECLARE_GLOBAL_DATA_PTR;
2002-08-26 21:58:50 +00:00
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
static void read_hw_vers (void);
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
const uint sdram_table[] = {
/* single read (offset 0x00 in upm ram) */
0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04,
0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_,
/* burst read (offset 0x08 in upm ram) */
0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04,
0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00,
0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* single write (offset 0x18 in upm ram) */
0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00,
0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_,
/* burst write (offset 0x20 in upm ram) */
0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00,
0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05,
/* init part1 (offset 0x28 in upm ram) */
0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34,
0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* refresh (offset 0x30 in upm ram) */
0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05,
/* init part2 (offset 0x34 in upm ram) */
0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34,
0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_,
/* exception (offset 0x3C in upm ram) */
0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*
* Test ETX ID string (ETX_xxx...)
*
* Return 1 always.
*/
int checkboard (void)
{
2005-10-13 14:45:02 +00:00
char *s = getenv ("serial#");
char *e;
2002-08-26 21:58:50 +00:00
puts ("Board: ");
#ifdef SB_ETX094
gd->board_type = 0; /* 0 = 2SDRAM-Device */
#else
gd->board_type = 1; /* 1 = 1SDRAM-Device */
#endif
if (!s || strncmp (s, "ETX_", 4)) {
puts ("### No HW ID - assuming ETX_094\n");
read_hw_vers ();
return (0);
}
for (e = s; *e; ++e) {
if (*e == ' ')
break;
}
for (; s < e; ++s) {
putc (*s);
}
putc ('\n');
read_hw_vers ();
return (0);
}
/* ------------------------------------------------------------------------- */
phys_size_t initdram (int board_type)
2002-08-26 21:58:50 +00:00
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
2002-08-26 21:58:50 +00:00
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size_b0, size_b1, size8, size9;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
/*
* Preliminary prescaler for refresh (depends on number of
* banks): This value is selected for four cycles every 62.4 us
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K; /* MPTPR_PTP_DIV32 0x0200 */
2002-08-26 21:58:50 +00:00
/* A3(SDRAM)=0 => Bursttype = Sequential
* A2-A0(SDRAM)=010 => Burst length = 4
* A4-A6(SDRAM)=010 => CasLat=2
*/
memctl->memc_mar = 0x00000088;
/*
* Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
* preliminary addresses - these have to be modified after the
* SDRAM size has been determined.
*/
memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
2002-08-26 21:58:50 +00:00
if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
2002-08-26 21:58:50 +00:00
}
memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
2002-08-26 21:58:50 +00:00
udelay (200);
/* perform SDRAM initializsation sequence */
memctl->memc_mcr = 0x80004128; /* SDRAM bank 0 (CS2) - Init Part 1 */
memctl->memc_mcr = 0x80004734; /* SDRAM bank 0 (CS2) - Init Part 2 */
udelay (1);
if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
memctl->memc_mcr = 0x80006128; /* SDRAM bank 1 (CS3) - Init Part 1 */
memctl->memc_mcr = 0x80006734; /* SDRAM bank 1 (CS3) - Init Part 2 */
udelay (1);
}
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
udelay (1000);
/*
* Check Bank 0 Memory Size for re-configuration
*
* try 8 column mode
*/
size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
2002-08-26 21:58:50 +00:00
SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
2002-08-26 21:58:50 +00:00
SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
size_b0 = size9;
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
} else { /* back to 8 columns */
size_b0 = size8;
memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
2002-08-26 21:58:50 +00:00
udelay (500);
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
}
if (board_type == 0) { /* "L" type boards have only one bank SDRAM */
/*
* Check Bank 1 Memory Size
* use current column settings
* [9 column SDRAM may also be used in 8 column mode,
* but then only half the real size will be used.]
*/
size_b1 =
2005-10-13 14:45:02 +00:00
dram_size (memctl->memc_mamr, (long *) SDRAM_BASE3_PRELIM,
2002-08-26 21:58:50 +00:00
SDRAM_MAX_SIZE);
/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */
} else {
size_b1 = 0;
}
udelay (1000);
/*
* Adjust refresh rate depending on SDRAM type, both banks
* For types > 128 MBit leave it at the current (fast) rate
*/
if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
/* reduce to 15.6 us (62.4 us / quad) */
memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; /*DIV16 */
2002-08-26 21:58:50 +00:00
udelay (1000);
}
/*
* Final mapping: map bigger bank first
*/
if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
2002-08-26 21:58:50 +00:00
memctl->memc_br3 =
(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
2002-08-26 21:58:50 +00:00
if (size_b0 > 0) {
/*
* Position Bank 0 immediately above Bank 1
*/
memctl->memc_or2 =
((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
2002-08-26 21:58:50 +00:00
memctl->memc_br2 =
((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
2002-08-26 21:58:50 +00:00
+ size_b1;
} else {
unsigned long reg;
/*
* No bank 0
*
* invalidate bank
*/
memctl->memc_br2 = 0;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
2002-08-26 21:58:50 +00:00
memctl->memc_mptpr = reg;
}
} else { /* SDRAM Bank 0 is bigger - map first */
memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
2002-08-26 21:58:50 +00:00
memctl->memc_br2 =
(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
2002-08-26 21:58:50 +00:00
if (size_b1 > 0) {
/*
* Position Bank 1 immediately above Bank 0
*/
memctl->memc_or3 =
((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
2002-08-26 21:58:50 +00:00
memctl->memc_br3 =
((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
2002-08-26 21:58:50 +00:00
+ size_b0;
} else {
unsigned long reg;
/*
* No bank 1
*
* invalidate bank
*/
memctl->memc_br3 = 0;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
2002-08-26 21:58:50 +00:00
memctl->memc_mptpr = reg;
}
}
udelay (10000);
return (size_b0 + size_b1);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
2002-08-26 21:58:50 +00:00
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
return (get_ram_size(base, maxsize));
2002-08-26 21:58:50 +00:00
}
/* ------------------------------------------------------------------------- */
/* HW-ID Table (Bits: 2^9;2^7;2^5) */
#define HW_ID_0 0x0000
#define HW_ID_1 0x0020
#define HW_ID_2 0x0080
#define HW_ID_3 0x00a0
#define HW_ID_4 0x0200
#define HW_ID_5 0x0220
#define HW_ID_6 0x0280
#define HW_ID_7 0x02a0
void read_hw_vers ()
{
unsigned short rd_msk = 0x02A0;
/* HW-ID pin-definition */
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
2002-08-26 21:58:50 +00:00
immr->im_ioport.iop_pddir &= ~(rd_msk);
immr->im_ioport.iop_pdpar &= ~(rd_msk);
/* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */
/* Check the HW-ID */
printf ("HW-Version: ");
switch (immr->im_ioport.iop_pddat & rd_msk) {
case HW_ID_0:
printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n");
break;
case HW_ID_1:
printf ("V0.9 / W50037-Q1-D6-1\n");
break;
case HW_ID_2:
printf ("NOT USED - assuming ID#2\n");
break;
case HW_ID_3:
printf ("NOT USED - assuming ID#3\n");
break;
case HW_ID_4:
printf ("NOT USED - assuming ID#4\n");
break;
case HW_ID_5:
printf ("NOT USED - assuming ID#5\n");
break;
case HW_ID_6:
printf ("NOT USED - assuming ID#6\n");
break;
case HW_ID_7:
printf ("NOT USED - assuming ID#7\n");
break;
default:
printf ("###Error###\n");
break;
}
}
/* ------------------------------------------------------------------------- */