u-boot/arch/arm/cpu/armv7/omap3/sdrc.c

251 lines
6.8 KiB
C
Raw Normal View History

/*
* Functions related to OMAP3 SDRC.
*
* This file has been created after exctracting and consolidating
* the SDRC related content from mem.c and board.c, also created
* generic init function (mem_init).
*
* Copyright (C) 2004-2010
* Texas Instruments Incorporated - http://www.ti.com/
*
* Copyright (C) 2011
* Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
*
* Author :
* Vaibhav Hiremath <hvaibhav@ti.com>
*
* Original implementation by (mem.c, board.c) :
* Sunil Kumar <sunilsaini05@gmail.com>
* Shashi Ranjan <shashiranjanmca05@gmail.com>
* Manikandan Pillai <mani.pillai@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
extern omap3_sysinfo sysinfo;
static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
/*
* is_mem_sdr -
* - Return 1 if mem type in use is SDR
*/
u32 is_mem_sdr(void)
{
if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR)
return 1;
return 0;
}
/*
* make_cs1_contiguous -
* - When we have CS1 populated we want to have it mapped after cs0 to allow
* command line mem=xyz use all memory with out discontinuous support
* compiled in. We could do it in the ATAG, but there really is two banks...
*/
void make_cs1_contiguous(void)
{
u32 size, a_add_low, a_add_high;
size = get_sdr_cs_size(CS0);
size >>= 25; /* divide by 32 MiB to find size to offset CS1 */
a_add_high = (size & 3) << 8; /* set up low field */
a_add_low = (size & 0x3C) >> 2; /* set up high field */
writel((a_add_high | a_add_low), &sdrc_base->cs_cfg);
}
/*
* get_sdr_cs_size -
* - Get size of chip select 0/1
*/
u32 get_sdr_cs_size(u32 cs)
{
u32 size;
/* get ram size field */
size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
size &= 0x3FF; /* remove unwanted bits */
size <<= 21; /* multiply by 2 MiB to find size in MB */
return size;
}
/*
* get_sdr_cs_offset -
* - Get offset of cs from cs0 start
*/
u32 get_sdr_cs_offset(u32 cs)
{
u32 offset;
if (!cs)
return 0;
offset = readl(&sdrc_base->cs_cfg);
offset = (offset & 15) << 27 | (offset & 0x300) << 17;
return offset;
}
/*
* write_sdrc_timings -
* - Takes CS and associated timings and initalize SDRAM
* - Test CS to make sure it's OK for use
*/
static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base,
struct board_sdrc_timings *timings)
{
/* Setup timings we got from the board. */
writel(timings->mcfg, &sdrc_base->cs[cs].mcfg);
writel(timings->ctrla, &sdrc_actim_base->ctrla);
writel(timings->ctrlb, &sdrc_actim_base->ctrlb);
writel(timings->rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl);
writel(CMD_NOP, &sdrc_base->cs[cs].manual);
writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
writel(timings->mr, &sdrc_base->cs[cs].mr);
/*
* Test ram in this bank
* Disable if bad or not present
*/
if (!mem_ok(cs))
writel(0, &sdrc_base->cs[cs].mcfg);
}
/*
* do_sdrc_init -
* - Code called once in C-Stack only context for CS0 and with early being
* true and a possible 2nd time depending on memory configuration from
* stack+global context.
*/
void do_sdrc_init(u32 cs, u32 early)
{
struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1;
struct board_sdrc_timings timings;
sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
/*
* When called in the early context this may be SPL and we will
* need to set all of the timings. This ends up being board
* specific so we call a helper function to take care of this
* for us. Otherwise, to be safe, we need to copy the settings
* from the first bank to the second. We will setup CS0,
* then set cs_cfg to the appropriate value then try and
* setup CS1.
*/
#ifdef CONFIG_SPL_BUILD
get_board_mem_timings(&timings);
#endif
if (early) {
/* reset sdrc controller */
writel(SOFTRESET, &sdrc_base->sysconfig);
wait_on_value(RESETDONE, RESETDONE, &sdrc_base->status,
12000000);
writel(0, &sdrc_base->sysconfig);
/* setup sdrc to ball mux */
writel(SDRC_SHARING, &sdrc_base->sharing);
/* Disable Power Down of CKE because of 1 CKE on combo part */
writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH,
&sdrc_base->power);
writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
sdelay(0x20000);
#ifdef CONFIG_SPL_BUILD
write_sdrc_timings(CS0, sdrc_actim_base0, &timings);
make_cs1_contiguous();
write_sdrc_timings(CS1, sdrc_actim_base1, &timings);
#endif
}
/*
* If we aren't using SPL we have been loaded by some
* other means which may not have correctly initialized
* both CS0 and CS1 (such as some older versions of x-loader)
* so we may be asked now to setup CS1.
*/
if (cs == CS1) {
timings.mcfg = readl(&sdrc_base->cs[CS0].mcfg),
timings.rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl);
timings.ctrla = readl(&sdrc_actim_base0->ctrla);
timings.ctrlb = readl(&sdrc_actim_base0->ctrlb);
timings.mr = readl(&sdrc_base->cs[CS0].mr);
write_sdrc_timings(cs, sdrc_actim_base1, &timings);
}
}
/*
* dram_init -
* - Sets uboots idea of sdram size
*/
int dram_init(void)
{
unsigned int size0 = 0, size1 = 0;
size0 = get_sdr_cs_size(CS0);
/*
* We always need to have cs_cfg point at where the second
* bank would be, if present. Failure to do so can lead to
* strange situations where memory isn't detected and
* configured correctly. CS0 will already have been setup
* at this point.
*/
make_cs1_contiguous();
do_sdrc_init(CS1, NOT_EARLY);
size1 = get_sdr_cs_size(CS1);
gd->ram_size = size0 + size1;
return 0;
}
void dram_init_banksize (void)
{
unsigned int size0 = 0, size1 = 0;
size0 = get_sdr_cs_size(CS0);
size1 = get_sdr_cs_size(CS1);
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = size0;
gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
gd->bd->bi_dram[1].size = size1;
}
/*
* mem_init -
* - Init the sdrc chip,
* - Selects CS0 and CS1,
*/
void mem_init(void)
{
/* only init up first bank here */
do_sdrc_init(CS0, EARLY_INIT);
}