u-boot/include/configs/sama5d27_som1_ek.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Configuration file for the SAMA5D27 SOM1 EK Board.
 *
 * Copyright (C) 2017 Microchip Corporation
 *		      Wenyou Yang <wenyou.yang@microchip.com>
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "at91-sama5_common.h"

#undef CONFIG_SYS_AT91_MAIN_CLOCK
#define CONFIG_SYS_AT91_MAIN_CLOCK      24000000 /* from 24 MHz crystal */

/* SPL */
#define CONFIG_SPL_STACK		0x218000
#define CONFIG_SPL_BSS_START_ADDR	0x20000000
#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000

#define CONFIG_SYS_MONITOR_LEN		(512 << 10)

#endif
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
board: atmel: Add SAMA5D27 SOM1 EK board The SAMA5D27-SiP (System in Package) integrates the SAMA5D2 with 1Gbit DDR2-SDRAM in a single package. The SAMA5D27 SOM1 embeds a 64Mbit QSPI flash, KSZ8081 Phy and Mac-address EEPROM. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-09-13 06:58:54 +00:00			`/*`
			`* Configuration file for the SAMA5D27 SOM1 EK Board.`
			`*`
			`* Copyright (C) 2017 Microchip Corporation`
			`* Wenyou Yang <wenyou.yang@microchip.com>`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`#include "at91-sama5_common.h"`

			`#undef CONFIG_SYS_AT91_MAIN_CLOCK`
			`#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */`

			`/* SPL */`
arm: Use CONFIG_SPL_STACK or CONFIG_SYS_INIT_SP_ADDR directly. In some cases, we define CONFIG_SYS_INIT_SP_ADDR differently for SPL or full U-Boot. This case should be making use of CONFIG_SPL_STACK, as that's what that variable is for. In a few other cases we define CONFIG_SPL_STACK directly to CONFIG_SYS_INIT_SP_ADDR, but do not need to as the code handles this correctly, normally. Signed-off-by: Tom Rini <trini@konsulko.com> 2022-05-24 17:11:41 +00:00			`#define CONFIG_SPL_STACK 0x218000`
board: atmel: Add SAMA5D27 SOM1 EK board The SAMA5D27-SiP (System in Package) integrates the SAMA5D2 with 1Gbit DDR2-SDRAM in a single package. The SAMA5D27 SOM1 embeds a 64Mbit QSPI flash, KSZ8081 Phy and Mac-address EEPROM. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-09-13 06:58:54 +00:00			`#define CONFIG_SPL_BSS_START_ADDR 0x20000000`
			`#define CONFIG_SYS_SPL_MALLOC_START 0x20080000`
			`#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000`

			`#define CONFIG_SYS_MONITOR_LEN (512 << 10)`

			`#endif`