u-boot/include/configs/highbank.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2010-2011 Calxeda, Inc.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_SYS_BOOTMAPSZ		(16 << 20)

#define CONFIG_PL011_CLOCK		150000000

/*
 * Miscellaneous configurable options
 */

/* Environment data setup
*/
#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfff88000	/* NVRAM base address */
#define CONFIG_SYS_NVRAM_SIZE		0x8000		/* NVRAM size */

#define CONFIG_SYS_SDRAM_BASE		0x00000000

#define CONFIG_EXTRA_ENV_SETTINGS				\
	"fdt_high=0x20000000\0"					\
	"initrd_high=0x20000000\0"

#endif
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
ARM: Add Calxeda Highbank platform Add basic support for Calxeda Highbank platform. Only minimal support with serial and SATA are included. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> 2011-10-24 08:50:20 +00:00			`/*`
			`* Copyright 2010-2011 Calxeda, Inc.`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`#define CONFIG_SYS_BOOTMAPSZ (16 << 20)`

			`#define CONFIG_PL011_CLOCK 150000000`

			`/*`
			`* Miscellaneous configurable options`
			`*/`

ARM: highbank: change env config to use nvram Update the highbank config to use env from NVRAM. Also remove extra env settings as they are not used unless the default env is used. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> 2012-02-01 16:57:56 +00:00			`/* Environment data setup`
			`*/`
			`#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */`
			`#define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */`
ARM: Add Calxeda Highbank platform Add basic support for Calxeda Highbank platform. Only minimal support with serial and SATA are included. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> 2011-10-24 08:50:20 +00:00
			`#define CONFIG_SYS_SDRAM_BASE 0x00000000`

arm: highbank: Limit FDT and initrd load addresses So far on Highbank/Midway machines U-Boot only ever uses 512MB of DRAM, even though the machines have typically 4GB and 8GB, respectively. That means that so far we didn't need an extra limit for placing the DTB and initrd, as the 512MB are lower than the kernel's limit ("lowmem", typically 768MB). With U-Boot now needing to learn about the actual memory size (to correctly populate the EFI memory map), it might relocate fdt and initrd to the end of DRAM, which is out of reach of the kernel. So add limiting values to the fdt_high and initrd_high environment variables, to prevent U-Boot from using too high addresses. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com> 2021-04-12 00:04:50 +00:00			`#define CONFIG_EXTRA_ENV_SETTINGS \`
			`"fdt_high=0x20000000\0" \`
			`"initrd_high=0x20000000\0"`

ARM: Add Calxeda Highbank platform Add basic support for Calxeda Highbank platform. Only minimal support with serial and SATA are included. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> 2011-10-24 08:50:20 +00:00			`#endif`