mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 22:43:10 +00:00
55 lines
1.7 KiB
Text
55 lines
1.7 KiB
Text
|
Texas Instruments TI SCI Reset Controller
|
||
|
|
=========================================
|
||
|
|
|
||
|
|
Some TI SoCs contain a system controller (like the SYSFW, etc...) that is
|
||
|
|
responsible for controlling the state of the IPs that are present.
|
||
|
|
Communication between the host processor running an OS and the system
|
||
|
|
controller happens through a protocol known as TI SCI [1].
|
||
|
|
|
||
|
|
[1] http://processors.wiki.ti.com/index.php/TISCI
|
||
|
|
|
||
|
|
Reset Controller Node
|
||
|
|
=====================
|
||
|
|
The reset controller node represents the resets of various hardware modules
|
||
|
|
present on the SoC managed by the SYSFW. Because this relies on the TI SCI
|
||
|
|
protocol to communicate with the SYSFW it must be a child of the sysfw node.
|
||
|
|
|
||
|
|
Required Properties:
|
||
|
|
--------------------
|
||
|
|
- compatible: Must be "ti,sci-reset"
|
||
|
|
- #reset-cells: Must be 2. Please see the reset consumer node below for
|
||
|
|
usage details.
|
||
|
|
|
||
|
|
Example (AM65x):
|
||
|
|
----------------
|
||
|
|
sysfw: sysfw {
|
||
|
|
compatible = "ti,am654-system-controller";
|
||
|
|
...
|
||
|
|
k3_reset: reset-controller {
|
||
|
|
compatible = "ti,sci-reset";
|
||
|
|
#reset-cells = <2>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
Reset Consumers
|
||
|
|
===============
|
||
|
|
Each of the reset consumer nodes should have the following properties,
|
||
|
|
in addition to their own properties.
|
||
|
|
|
||
|
|
Required Properties:
|
||
|
|
--------------------
|
||
|
|
- resets: A phandle and reset specifier pair, one pair for each reset signal
|
||
|
|
that affects the device, or that the device manages. The phandle
|
||
|
|
should point to the TI SCI reset controller node, and the reset
|
||
|
|
specifier should have 2 cell-values. The first cell should contain
|
||
|
|
the device ID. The second cell should contain the reset mask value
|
||
|
|
used by system controller.
|
||
|
|
|
||
|
|
Example (AM65x):
|
||
|
|
----------------
|
||
|
|
uart2: serial@02800000 {
|
||
|
|
compatible = "ti,omap4-uart";
|
||
|
|
...
|
||
|
|
resets = <&k3_reset 5 1>;
|
||
|
|
};
|