Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-16 09:48:16 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/include/configs/stm32mp15_dh_dhsom.h

37 lines
1.1 KiB
C
Raw Normal View History

ARM: stm32: Implement board coding on AV96 The AV96 board does exist in multiple variants. To cater for all of them, implement board code handling. There are two GPIOs which code the type of the board, read them out and use the value to pick the correct device tree from an fitImage. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Change-Id: Iddb330b9a66500495885457cbe17edc0eacaaf43
2020-04-22 11:18:11 +00:00
/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
/*
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
*
* Configuration settings for the DH STM32MP15x SoMs
*/
board: stmp32mp1: split board and SOC STM32MP15 configuration Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-22 08:19:25 +00:00
#ifndef __CONFIG_STM32MP15_DH_DHSOM_H__
#define __CONFIG_STM32MP15_DH_DHSOM_H__
ARM: stm32: Implement board coding on AV96 The AV96 board does exist in multiple variants. To cater for all of them, implement board code handling. There are two GPIOs which code the type of the board, read them out and use the value to pick the correct device tree from an fitImage. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Change-Id: Iddb330b9a66500495885457cbe17edc0eacaaf43
2020-04-22 11:18:11 +00:00
ARM: stm32: Increase PHY auto-negotiation timeout to 20s on DHSOM The Micrel PHYs on known DHSOM based boards take a while to come out of reset, increase the auto-negotiation timeout to prevent it from timing out in case the ethernet is used right after the board was reset. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-13 02:26:05 +00:00
/* PHY needs a longer autoneg timeout */
#define PHY_ANEG_TIMEOUT 20000
ARM: dts: stm32: Add DFU support for DHCOR recovery This patch configures U-Boot SPL for DHCOR SoM to permit DFU upload of SPL and subsequent u-boot.itb for recovery or commissioning purposes. To start U-Boot on DHCOR based board, e.g. Avenger96, proceed as follows: - Install dfu-util on the host PC (in debian this is package 'dfu-util') - Power off the Avenger96 board. - Connect both USB-serial console and USB-OTG microB ports to host PC. - Switch Avenger96 to USB boot mode -- BOOT0..2 switches all set to 0. - Power on the Avenger96 board. - Verify using '$ dmesg' that a new device has been detected as follows: New USB device found, idVendor=0483, idProduct=df11, bcdDevice= 2.00 New USB device strings: Mfr=1, Product=2, SerialNumber=3 Product: DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000 Manufacturer: STMicroelectronics - Upload U-Boot SPL: $ dfu-util -a 1 -D u-boot-spl.stm32 - Upload U-Boot proper: $ dfu-util -a 0 -D u-boot.itb - At this point, SPL will wait for user to press "Ctrl-C" on serial console. When ready to interact with U-Boot, press Ctrl-C to start the bootloader. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-12-06 20:58:09 +00:00
#ifdef CONFIG_SPL_BUILD
global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-04 15:03:50 +00:00
#define CFG_EXTRA_ENV_SETTINGS \
ARM: dts: stm32: Add DFU support for DHCOR recovery This patch configures U-Boot SPL for DHCOR SoM to permit DFU upload of SPL and subsequent u-boot.itb for recovery or commissioning purposes. To start U-Boot on DHCOR based board, e.g. Avenger96, proceed as follows: - Install dfu-util on the host PC (in debian this is package 'dfu-util') - Power off the Avenger96 board. - Connect both USB-serial console and USB-OTG microB ports to host PC. - Switch Avenger96 to USB boot mode -- BOOT0..2 switches all set to 0. - Power on the Avenger96 board. - Verify using '$ dmesg' that a new device has been detected as follows: New USB device found, idVendor=0483, idProduct=df11, bcdDevice= 2.00 New USB device strings: Mfr=1, Product=2, SerialNumber=3 Product: DFU in HS Mode @Device ID /0x500, @Revision ID /0x0000 Manufacturer: STMicroelectronics - Upload U-Boot SPL: $ dfu-util -a 1 -D u-boot-spl.stm32 - Upload U-Boot proper: $ dfu-util -a 0 -D u-boot.itb - At this point, SPL will wait for user to press "Ctrl-C" on serial console. When ready to interact with U-Boot, press Ctrl-C to start the bootloader. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-12-06 20:58:09 +00:00
"dfu_alt_info_ram=u-boot.itb ram " \
__stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \
" 0x800000\0"
#endif
ARM: stm32: Increase USB power-good delay on DHSOM The USB hub on STM32MP1 DHCOM boards needs to wait a bit longer until the USB Vbus is stable. Increase the USB power-good delay to 1 s. This adds default-undefined STM32MP_BOARD_EXTRA_ENV variable into stm32mp15_common.h to reduce duplication in board-specific config files adding custom environment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-13 02:24:44 +00:00
#define STM32MP_BOARD_EXTRA_ENV \
ARM: stm32: Add update_sf script to install U-Boot into SF on DHSOM Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. The script erases the entire SPI NOR, including U-Boot environment, to make sure the installation is clean. To retain environment from current running U-Boot, run 'saveenv' after running the 'update_sf' script. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-13 02:25:13 +00:00
"usb_pgood_delay=1000\0" \
"update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \
"setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \
"load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \
"env set filesize1 ${filesize} && " \
"load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \
"sf probe && sf erase 0 0x200000 && " \
"sf update ${loadaddr1} 0 ${filesize1} && " \
"sf update ${loadaddr1} 0x40000 ${filesize1} && " \
"sf update ${loadaddr} 0x80000 ${filesize} && " \
"env set filesize1 && env set loadaddr1\0"
ARM: stm32: Increase USB power-good delay on DHSOM The USB hub on STM32MP1 DHCOM boards needs to wait a bit longer until the USB Vbus is stable. Increase the USB power-good delay to 1 s. This adds default-undefined STM32MP_BOARD_EXTRA_ENV variable into stm32mp15_common.h to reduce duplication in board-specific config files adding custom environment. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-13 02:24:44 +00:00
board: stmp32mp1: split board and SOC STM32MP15 configuration Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-10-22 08:19:25 +00:00
#include <configs/stm32mp15_common.h>
ARM: stm32: Implement board coding on AV96 The AV96 board does exist in multiple variants. To cater for all of them, implement board code handling. There are two GPIOs which code the type of the board, read them out and use the value to pick the correct device tree from an fitImage. Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Patrice Chotard <patrice.chotard@st.com> Change-Id: Iddb330b9a66500495885457cbe17edc0eacaaf43
2020-04-22 11:18:11 +00:00
#endif
Reference in a new issue Copy permalink