Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 18:59:44 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/pinctrl/mediatek/pinctrl-mtk-common.c

800 lines
18 KiB
C
Raw Normal View History

pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 MediaTek Inc.
* Author: Ryder Lee <ryder.lee@mediatek.com>
*/
#include <common.h>
#include <dm.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/pinctrl.h>
#include <asm/io.h>
#include <asm-generic/gpio.h>
common: Drop linux/bitops.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:40:13 +00:00
#include <linux/bitops.h>
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
#include "pinctrl-mtk-common.h"
pinctrl: mediatek: fix warning Fix the following warning when CONFIG_PINCONF=n: drivers/pinctrl/mediatek/pinctrl-mtk-common.c:35:36: warning: ‘mtk_drive’ defined but not used [-Wunused-const-variable=] static const struct mtk_drive_desc mtk_drive[] = { ^~~~~~~~~ Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:08 +00:00
#if CONFIG_IS_ENABLED(PINCONF)
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
/**
* struct mtk_drive_desc - the structure that holds the information
* of the driving current
* @min: the minimum current of this group
* @max: the maximum current of this group
* @step: the step current of this group
* @scal: the weight factor
*
* formula: output = ((input) / step - 1) * scal
*/
struct mtk_drive_desc {
u8 min;
u8 max;
u8 step;
u8 scal;
};
/* The groups of drive strength */
static const struct mtk_drive_desc mtk_drive[] = {
[DRV_GRP0] = { 4, 16, 4, 1 },
[DRV_GRP1] = { 4, 16, 4, 2 },
[DRV_GRP2] = { 2, 8, 2, 1 },
[DRV_GRP3] = { 2, 8, 2, 2 },
[DRV_GRP4] = { 2, 16, 2, 1 },
};
pinctrl: mediatek: fix warning Fix the following warning when CONFIG_PINCONF=n: drivers/pinctrl/mediatek/pinctrl-mtk-common.c:35:36: warning: ‘mtk_drive’ defined but not used [-Wunused-const-variable=] static const struct mtk_drive_desc mtk_drive[] = { ^~~~~~~~~ Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-18 17:08:08 +00:00
#endif
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
static const char *mtk_pinctrl_dummy_name = "_dummy";
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
static void mtk_w32(struct udevice *dev, u8 i, u32 reg, u32 val)
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
__raw_writel(val, priv->base[i] + reg);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
}
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
static u32 mtk_r32(struct udevice *dev, u8 i, u32 reg)
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
return __raw_readl(priv->base[i] + reg);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
}
static inline int get_count_order(unsigned int count)
{
int order;
order = fls(count) - 1;
if (count & (count - 1))
order++;
return order;
}
void mtk_rmw(struct udevice *dev, u32 reg, u32 mask, u32 set)
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
{
return mtk_i_rmw(dev, 0, reg, mask, set);
}
void mtk_i_rmw(struct udevice *dev, u8 i, u32 reg, u32 mask, u32 set)
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
{
u32 val;
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
val = mtk_r32(dev, i, reg);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
val &= ~mask;
val |= set;
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
mtk_w32(dev, i, reg, val);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
}
static int mtk_hw_pin_field_lookup(struct udevice *dev, int pin,
const struct mtk_pin_reg_calc *rc,
struct mtk_pin_field *pfd)
{
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
const struct mtk_pin_field_calc *c, *e;
u32 bits;
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
u32 base_calc = priv->soc->base_calc;
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
c = rc->range;
e = c + rc->nranges;
while (c < e) {
if (pin >= c->s_pin && pin <= c->e_pin)
break;
c++;
}
if (c >= e)
return -EINVAL;
/* Calculated bits as the overall offset the pin is located at,
* if c->fixed is held, that determines the all the pins in the
* range use the same field with the s_pin.
*/
bits = c->fixed ? c->s_bit : c->s_bit + (pin - c->s_pin) * (c->x_bits);
/* Fill pfd from bits. For example 32-bit register applied is assumed
* when c->sz_reg is equal to 32.
*/
pfd->offset = c->s_addr + c->x_addrs * (bits / c->sz_reg);
pfd->bitpos = bits % c->sz_reg;
pfd->mask = (1 << c->x_bits) - 1;
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
if (base_calc)
pfd->index = c->i_base;
else
pfd->index = 0;
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
/* pfd->next is used for indicating that bit wrapping-around happens
* which requires the manipulation for bit 0 starting in the next
* register to form the complete field read/write.
*/
pfd->next = pfd->bitpos + c->x_bits > c->sz_reg ? c->x_addrs : 0;
return 0;
}
static int mtk_hw_pin_field_get(struct udevice *dev, int pin,
int field, struct mtk_pin_field *pfd)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
const struct mtk_pin_reg_calc *rc;
if (field < 0 || field >= PINCTRL_PIN_REG_MAX)
return -EINVAL;
if (priv->soc->reg_cal && priv->soc->reg_cal[field].range)
rc = &priv->soc->reg_cal[field];
else
return -EINVAL;
return mtk_hw_pin_field_lookup(dev, pin, rc, pfd);
}
static void mtk_hw_bits_part(struct mtk_pin_field *pf, int *h, int *l)
{
*l = 32 - pf->bitpos;
*h = get_count_order(pf->mask) - *l;
}
static void mtk_hw_write_cross_field(struct udevice *dev,
struct mtk_pin_field *pf, int value)
{
int nbits_l, nbits_h;
mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
mtk_i_rmw(dev, pf->index, pf->offset, pf->mask << pf->bitpos,
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
(value & pf->mask) << pf->bitpos);
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
mtk_i_rmw(dev, pf->index, pf->offset + pf->next, BIT(nbits_h) - 1,
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
(value & pf->mask) >> nbits_l);
}
static void mtk_hw_read_cross_field(struct udevice *dev,
struct mtk_pin_field *pf, int *value)
{
int nbits_l, nbits_h, h, l;
mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
l = (mtk_r32(dev, pf->index, pf->offset) >> pf->bitpos) & (BIT(nbits_l) - 1);
h = (mtk_r32(dev, pf->index, pf->offset + pf->next)) & (BIT(nbits_h) - 1);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
*value = (h << nbits_l) | l;
}
static int mtk_hw_set_value(struct udevice *dev, int pin, int field,
int value)
{
struct mtk_pin_field pf;
int err;
err = mtk_hw_pin_field_get(dev, pin, field, &pf);
if (err)
return err;
if (!pf.next)
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
mtk_i_rmw(dev, pf.index, pf.offset, pf.mask << pf.bitpos,
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
(value & pf.mask) << pf.bitpos);
else
mtk_hw_write_cross_field(dev, &pf, value);
return 0;
}
static int mtk_hw_get_value(struct udevice *dev, int pin, int field,
int *value)
{
struct mtk_pin_field pf;
int err;
err = mtk_hw_pin_field_get(dev, pin, field, &pf);
if (err)
return err;
if (!pf.next)
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
*value = (mtk_r32(dev, pf.index, pf.offset) >> pf.bitpos) & pf.mask;
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
else
mtk_hw_read_cross_field(dev, &pf, value);
return 0;
}
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
#if CONFIG_IS_ENABLED(PINCONF)
static int mtk_get_pin_io_type(struct udevice *dev, int pin,
struct mtk_io_type_desc *io_type)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
u8 io_n = priv->soc->pins[pin].io_n;
if (io_n >= priv->soc->ntype)
return -EINVAL;
io_type->name = priv->soc->io_type[io_n].name;
io_type->bias_set = priv->soc->io_type[io_n].bias_set;
io_type->drive_set = priv->soc->io_type[io_n].drive_set;
io_type->input_enable = priv->soc->io_type[io_n].input_enable;
return 0;
}
#endif
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
static int mtk_get_groups_count(struct udevice *dev)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
return priv->soc->ngrps;
}
static const char *mtk_get_pin_name(struct udevice *dev,
unsigned int selector)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
pinctrl: mediatek: fix wrong assignment in mtk_get_pin_name This is a bug fix for mtk pinctrl common part. Appearently pins should be used instead of grps in mtk_get_pin_name(). Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2021-03-05 02:22:11 +00:00
if (!priv->soc->pins[selector].name)
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
return mtk_pinctrl_dummy_name;
return priv->soc->pins[selector].name;
}
static int mtk_get_pins_count(struct udevice *dev)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
return priv->soc->npins;
}
pinctrl: mediatek: add get_pin_muxing ops for mediatek pinctrl This patch add get_pin_muxing support for mediatek pinctrl drivers Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2021-03-05 02:22:19 +00:00
static int mtk_get_pin_muxing(struct udevice *dev, unsigned int selector,
char *buf, int size)
{
int val, err;
err = mtk_hw_get_value(dev, selector, PINCTRL_PIN_REG_MODE, &val);
if (err)
return err;
snprintf(buf, size, "Aux Func.%d", val);
return 0;
}
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
static const char *mtk_get_group_name(struct udevice *dev,
unsigned int selector)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
if (!priv->soc->grps[selector].name)
return mtk_pinctrl_dummy_name;
return priv->soc->grps[selector].name;
}
static int mtk_get_functions_count(struct udevice *dev)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
return priv->soc->nfuncs;
}
static const char *mtk_get_function_name(struct udevice *dev,
unsigned int selector)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
if (!priv->soc->funcs[selector].name)
return mtk_pinctrl_dummy_name;
return priv->soc->funcs[selector].name;
}
static int mtk_pinmux_group_set(struct udevice *dev,
unsigned int group_selector,
unsigned int func_selector)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
const struct mtk_group_desc *grp =
&priv->soc->grps[group_selector];
int i;
for (i = 0; i < grp->num_pins; i++) {
int *pin_modes = grp->data;
mtk_hw_set_value(dev, grp->pins[i], PINCTRL_PIN_REG_MODE,
pin_modes[i]);
}
return 0;
}
#if CONFIG_IS_ENABLED(PINCONF)
static const struct pinconf_param mtk_conf_params[] = {
{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
{ "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
{ "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },
{ "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 },
{ "output-high", PIN_CONFIG_OUTPUT, 1, },
{ "output-low", PIN_CONFIG_OUTPUT, 0, },
{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
};
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int mtk_pinconf_bias_set_v0(struct udevice *dev, u32 pin, bool disable,
bool pullup, u32 val)
{
return mtk_pinconf_bias_set_pu_pd(dev, pin, disable, pullup, val);
}
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int mtk_pinconf_bias_set_v1(struct udevice *dev, u32 pin, bool disable,
bool pullup, u32 val)
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
{
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int err;
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
/* try pupd_r1_r0 if pullen_pullsel return error */
err = mtk_pinconf_bias_set_pullen_pullsel(dev, pin, disable, pullup,
val);
if (err)
return mtk_pinconf_bias_set_pupd_r1_r0(dev, pin, disable,
pullup, val);
return err;
}
int mtk_pinconf_bias_set_pu_pd(struct udevice *dev, u32 pin, bool disable,
bool pullup, u32 val)
{
int err;
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
if (disable) {
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PU, 0);
if (err)
return err;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PD, 0);
if (err)
return err;
} else {
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PU, pullup);
if (err)
return err;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PD, !pullup);
if (err)
return err;
}
return 0;
}
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int mtk_pinconf_bias_set_pullen_pullsel(struct udevice *dev, u32 pin,
bool disable, bool pullup, u32 val)
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
{
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int err;
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
if (disable) {
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PULLEN, 0);
if (err)
return err;
} else {
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PULLEN, 1);
if (err)
return err;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PULLSEL,
pullup);
if (err)
return err;
}
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
return 0;
}
int mtk_pinconf_bias_set_pupd_r1_r0(struct udevice *dev, u32 pin, bool disable,
bool pullup, u32 val)
{
int err, r0, r1;
r0 = !!(val & 1);
r1 = !!(val & 2);
if (disable) {
pullup = 0;
r0 = 0;
r1 = 0;
pinctrl: mediatek: add PUPD/R0/R1 support for MT7623 The pins for the MMC controller weren't being set up correctly because the pinctrl driver only sets the GPIO pullup/pulldown config and doesn't handle the special cases with PUPD/R0/R1 control. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-06-19 11:40:20 +00:00
}
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
/* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_PUPD, !pullup);
if (err)
return err;
/* Also set PUPD/R0/R1 if the pin has them */
mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_R0, r0);
mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_R1, r1);
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
return 0;
}
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int mtk_pinconf_bias_set(struct udevice *dev, u32 pin, u32 arg, u32 val)
{
int err;
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
struct mtk_io_type_desc io_type;
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int rev = priv->soc->rev;
bool disable, pullup;
disable = (arg == PIN_CONFIG_BIAS_DISABLE);
pullup = (arg == PIN_CONFIG_BIAS_PULL_UP);
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
if (!mtk_get_pin_io_type(dev, pin, &io_type)) {
if (io_type.bias_set)
err = io_type.bias_set(dev, pin, disable, pullup,
val);
else
err = -EINVAL;
} else if (rev == MTK_PINCTRL_V0) {
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
err = mtk_pinconf_bias_set_v0(dev, pin, disable, pullup, val);
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
} else {
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
err = mtk_pinconf_bias_set_v1(dev, pin, disable, pullup, val);
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
}
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
return err;
}
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
int mtk_pinconf_input_enable_v1(struct udevice *dev, u32 pin, u32 arg)
{
int err;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_IES, 1);
if (err)
return err;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DIR, 0);
if (err)
return err;
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
return 0;
}
int mtk_pinconf_input_enable(struct udevice *dev, u32 pin, u32 arg)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
struct mtk_io_type_desc io_type;
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int rev = priv->soc->rev;
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
if (!mtk_get_pin_io_type(dev, pin, &io_type))
if (io_type.input_enable)
return io_type.input_enable(dev, pin, arg);
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
if (rev == MTK_PINCTRL_V1)
return mtk_pinconf_input_enable_v1(dev, pin, arg);
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
return 0;
}
int mtk_pinconf_drive_set_v0(struct udevice *dev, u32 pin, u32 arg)
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
const struct mtk_pin_desc *desc = &priv->soc->pins[pin];
const struct mtk_drive_desc *tb;
int err = -ENOTSUPP;
tb = &mtk_drive[desc->drv_n];
/* 4mA when (e8, e4) = (0, 0)
* 8mA when (e8, e4) = (0, 1)
* 12mA when (e8, e4) = (1, 0)
* 16mA when (e8, e4) = (1, 1)
*/
if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) {
arg = (arg / tb->step - 1) * tb->scal;
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_E4,
arg & 0x1);
if (err)
return err;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_E8,
(arg & 0x2) >> 1);
if (err)
return err;
}
return 0;
}
int mtk_pinconf_drive_set_v1(struct udevice *dev, u32 pin, u32 arg)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
const struct mtk_pin_desc *desc = &priv->soc->pins[pin];
const struct mtk_drive_desc *tb;
int err = -ENOTSUPP;
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
tb = &mtk_drive[desc->drv_n];
if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) {
arg = (arg / tb->step - 1) * tb->scal;
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DRV, arg);
if (err)
return err;
}
return 0;
}
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int mtk_pinconf_drive_set(struct udevice *dev, u32 pin, u32 arg)
{
int err;
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
struct mtk_io_type_desc io_type;
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
int rev = priv->soc->rev;
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
if (!mtk_get_pin_io_type(dev, pin, &io_type)) {
if (io_type.drive_set)
err = io_type.drive_set(dev, pin, arg);
else
err = -EINVAL;
} else if (rev == MTK_PINCTRL_V0) {
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
err = mtk_pinconf_drive_set_v0(dev, pin, arg);
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
} else {
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
err = mtk_pinconf_drive_set_v1(dev, pin, arg);
pinctrl: mediatek: add support for different types of IO pins There are many pins in an SoC, and register usage may vary by pins. This patch introduces a concept of "io type" and "io type group" to mediatek pinctrl drivers. This can provide different pinconf handlers implementation (eg: "bias-pull-up/down", "driving" and "input-enable") for IO pins that belong to different types. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:53 +00:00
}
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
return err;
}
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
static int mtk_pinconf_set(struct udevice *dev, unsigned int pin,
unsigned int param, unsigned int arg)
{
int err = 0;
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
err = mtk_pinconf_bias_set(dev, pin, param, arg);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
if (err)
goto err;
break;
case PIN_CONFIG_OUTPUT_ENABLE:
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_SMT, 0);
if (err)
goto err;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DIR, 1);
if (err)
goto err;
break;
case PIN_CONFIG_INPUT_ENABLE:
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
err = mtk_pinconf_input_enable(dev, pin, param);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
if (err)
goto err;
break;
case PIN_CONFIG_OUTPUT:
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DIR, 1);
if (err)
goto err;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DO, arg);
if (err)
goto err;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
/* arg = 1: Input mode & SMT enable ;
* arg = 0: Output mode & SMT disable
*/
arg = arg ? 2 : 1;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_DIR,
arg & 1);
if (err)
goto err;
err = mtk_hw_set_value(dev, pin, PINCTRL_PIN_REG_SMT,
!!(arg & 2));
if (err)
goto err;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
pinctrl: mediatek: rewrite mtk_pinconf_set and related functions There are many pins in a SoCs, and different pin may belong to different "io_type", For example: some pins of MT7622 belongs to "io_type A", the other belongs to "io_type B", and pinctrl "V0" means handle pinconf via "io_type A" or "io_type B", so SoCs that contain "io_type A" and "io_type B" pins, use "V0" in pinctrl driver. This patch separates the implementation of register operations (e.g: "bias-pull-up/down", "driving" and "input-enable") into different functions, and lets the original V0/V1 ops to call the new functions. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:51 +00:00
err = mtk_pinconf_drive_set(dev, pin, arg);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
if (err)
goto err;
break;
default:
err = -ENOTSUPP;
}
err:
return err;
}
static int mtk_pinconf_group_set(struct udevice *dev,
unsigned int group_selector,
unsigned int param, unsigned int arg)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
const struct mtk_group_desc *grp =
&priv->soc->grps[group_selector];
int i, ret;
for (i = 0; i < grp->num_pins; i++) {
ret = mtk_pinconf_set(dev, grp->pins[i], param, arg);
if (ret)
return ret;
}
return 0;
}
#endif
const struct pinctrl_ops mtk_pinctrl_ops = {
.get_pins_count = mtk_get_pins_count,
.get_pin_name = mtk_get_pin_name,
pinctrl: mediatek: add get_pin_muxing ops for mediatek pinctrl This patch add get_pin_muxing support for mediatek pinctrl drivers Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2021-03-05 02:22:19 +00:00
.get_pin_muxing = mtk_get_pin_muxing,
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
.get_groups_count = mtk_get_groups_count,
.get_group_name = mtk_get_group_name,
.get_functions_count = mtk_get_functions_count,
.get_function_name = mtk_get_function_name,
.pinmux_group_set = mtk_pinmux_group_set,
#if CONFIG_IS_ENABLED(PINCONF)
.pinconf_num_params = ARRAY_SIZE(mtk_conf_params),
.pinconf_params = mtk_conf_params,
.pinconf_set = mtk_pinconf_set,
.pinconf_group_set = mtk_pinconf_group_set,
#endif
.set_state = pinctrl_generic_set_state,
};
pinctrl: mediatek: do not probe gpio driver if not enabled The mtk pinctrl driver is a combination driver with support for both pinctrl and gpio. When this driver is used in SPL, gpio support may not be enabled, and this will result in a compilation error. To fix this, macros are added to make sure gpio related code will only be compiled when gpio support is enabled. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-05 02:22:26 +00:00
#if CONFIG_IS_ENABLED(DM_GPIO) || \
Rename GPIO_SUPPORT to GPIO Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:30 +00:00
(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO))
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
static int mtk_gpio_get(struct udevice *dev, unsigned int off)
{
int val, err;
err = mtk_hw_get_value(dev->parent, off, PINCTRL_PIN_REG_DI, &val);
if (err)
return err;
return !!val;
}
static int mtk_gpio_set(struct udevice *dev, unsigned int off, int val)
{
return mtk_hw_set_value(dev->parent, off, PINCTRL_PIN_REG_DO, !!val);
}
static int mtk_gpio_get_direction(struct udevice *dev, unsigned int off)
{
int val, err;
err = mtk_hw_get_value(dev->parent, off, PINCTRL_PIN_REG_DIR, &val);
if (err)
return err;
return val ? GPIOF_OUTPUT : GPIOF_INPUT;
}
static int mtk_gpio_direction_input(struct udevice *dev, unsigned int off)
{
return mtk_hw_set_value(dev->parent, off, PINCTRL_PIN_REG_DIR, 0);
}
static int mtk_gpio_direction_output(struct udevice *dev,
unsigned int off, int val)
{
mtk_gpio_set(dev, off, val);
/* And set the requested value */
return mtk_hw_set_value(dev->parent, off, PINCTRL_PIN_REG_DIR, 1);
}
static int mtk_gpio_request(struct udevice *dev, unsigned int off,
const char *label)
{
pinctrl: mediatek: add support for different pinctrl Due to the pinctrl hardware of MT7622 is difference from others SoC which using the common part of mediatek pinctrl. So we need to modify the common part of mediatek pinctrl. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2020-01-10 08:30:28 +00:00
struct mtk_pinctrl_priv *priv = dev_get_priv(dev->parent);
return mtk_hw_set_value(dev->parent, off, PINCTRL_PIN_REG_MODE,
priv->soc->gpio_mode);
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
}
static int mtk_gpio_probe(struct udevice *dev)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev->parent);
struct gpio_dev_priv *uc_priv;
uc_priv = dev_get_uclass_priv(dev);
uc_priv->bank_name = priv->soc->name;
uc_priv->gpio_count = priv->soc->npins;
return 0;
}
static const struct dm_gpio_ops mtk_gpio_ops = {
.request = mtk_gpio_request,
.set_value = mtk_gpio_set,
.get_value = mtk_gpio_get,
.get_function = mtk_gpio_get_direction,
.direction_input = mtk_gpio_direction_input,
.direction_output = mtk_gpio_direction_output,
};
static struct driver mtk_gpio_driver = {
.name = "mediatek_gpio",
.id = UCLASS_GPIO,
.probe = mtk_gpio_probe,
.ops = &mtk_gpio_ops,
};
static int mtk_gpiochip_register(struct udevice *parent)
{
struct uclass_driver *drv;
struct udevice *dev;
int ret;
ofnode node;
drv = lists_uclass_lookup(UCLASS_GPIO);
if (!drv)
return -ENOENT;
pinctrl: mediatek: correct error handling If no GPIO controller is found, the return value should not depend on a random value on the stack. Initialize variable ret. The problem was indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
2020-12-27 20:18:26 +00:00
ret = -ENOENT;
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
dev_for_each_subnode(node, parent)
if (ofnode_read_bool(node, "gpio-controller")) {
ret = 0;
break;
}
if (ret)
return ret;
ret = device_bind_with_driver_data(parent, &mtk_gpio_driver,
"mediatek_gpio", 0, node,
&dev);
if (ret)
return ret;
return 0;
}
pinctrl: mediatek: do not probe gpio driver if not enabled The mtk pinctrl driver is a combination driver with support for both pinctrl and gpio. When this driver is used in SPL, gpio support may not be enabled, and this will result in a compilation error. To fix this, macros are added to make sure gpio related code will only be compiled when gpio support is enabled. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-05 02:22:26 +00:00
#endif
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
int mtk_pinctrl_common_probe(struct udevice *dev,
struct mtk_pinctrl_soc *soc)
{
struct mtk_pinctrl_priv *priv = dev_get_priv(dev);
pinctrl: mediatek: do not probe gpio driver if not enabled The mtk pinctrl driver is a combination driver with support for both pinctrl and gpio. When this driver is used in SPL, gpio support may not be enabled, and this will result in a compilation error. To fix this, macros are added to make sure gpio related code will only be compiled when gpio support is enabled. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-05 02:22:26 +00:00
int ret = 0;
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
u32 i = 0;
fdt_addr_t addr;
u32 base_calc = soc->base_calc;
u32 nbase_names = soc->nbase_names;
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
priv->soc = soc;
pinctrl: mediatek: introduce multiple memory bases support Pinctrl design of some mediatek SoC need to access registers that distribute in multiple memory base address. this patch introduce new mechanism in mediatek pinctrl driver to support the chips which have the new design. This patch add a member 'base_calc' in pinctrl private data, and changed original 'base' private data to an array of *iomem. When 'base_calc' attribute is set, it will requests multiplue regs base from the DT, if 'base_calc' attribute is not set, it only use legacy way to request single reg resource from the DT. Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2022-04-21 06:23:52 +00:00
if (!base_calc)
nbase_names = 1;
for (i = 0; i < nbase_names; i++) {
addr = devfdt_get_addr_index(dev, i);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
priv->base[i] = (void __iomem *)addr;
}
pinctrl: mediatek: do not probe gpio driver if not enabled The mtk pinctrl driver is a combination driver with support for both pinctrl and gpio. When this driver is used in SPL, gpio support may not be enabled, and this will result in a compilation error. To fix this, macros are added to make sure gpio related code will only be compiled when gpio support is enabled. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-05 02:22:26 +00:00
#if CONFIG_IS_ENABLED(DM_GPIO) || \
Rename GPIO_SUPPORT to GPIO Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-11 03:14:30 +00:00
(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO))
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
ret = mtk_gpiochip_register(dev);
pinctrl: mediatek: do not probe gpio driver if not enabled The mtk pinctrl driver is a combination driver with support for both pinctrl and gpio. When this driver is used in SPL, gpio support may not be enabled, and this will result in a compilation error. To fix this, macros are added to make sure gpio related code will only be compiled when gpio support is enabled. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-05 02:22:26 +00:00
#endif
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
pinctrl: mediatek: do not probe gpio driver if not enabled The mtk pinctrl driver is a combination driver with support for both pinctrl and gpio. When this driver is used in SPL, gpio support may not be enabled, and this will result in a compilation error. To fix this, macros are added to make sure gpio related code will only be compiled when gpio support is enabled. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-05 02:22:26 +00:00
return ret;
pinctrl: MediaTek: add pinctrl driver for MT7629 SoC This patch adds pinctrl support for MT7629 SoC. The IO core found on the SoC has the registers for pinctrl, pinconf and gpio mixed up in the same register range. Hence the driver also implements the gpio functionality through UCLASS_GPIO. This also creates a common file as there might be other chips that use the same binding and driver, then being a little more abstract could help in the long run. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-15 02:07:58 +00:00
}
Reference in a new issue Copy permalink