Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-19 03:08:31 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/ddr/marvell/a38x/ddr3_init.h

394 lines
13 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
/*
* Copyright (C) Marvell International Ltd. and its affiliates
*/
#ifndef _DDR3_INIT_H
#define _DDR3_INIT_H
#if defined(CONFIG_ARMADA_38X)
#include "ddr3_a38x.h"
#include "ddr3_a38x_mc_static.h"
#include "ddr3_a38x_topology.h"
#endif
#include "ddr3_hws_hw_training.h"
#include "ddr3_hws_sil_training.h"
#include "ddr3_logging_def.h"
#include "ddr3_training_hw_algo.h"
#include "ddr3_training_ip.h"
#include "ddr3_training_ip_centralization.h"
#include "ddr3_training_ip_engine.h"
#include "ddr3_training_ip_flow.h"
#include "ddr3_training_ip_pbs.h"
#include "ddr3_training_ip_prv_if.h"
#include "ddr3_training_ip_static.h"
#include "ddr3_training_leveling.h"
#include "xor.h"
/*
* MV_DEBUG_INIT need to be defines, otherwise the output of the
* DDR2 training code is not complete and misleading
*/
#define MV_DEBUG_INIT
#ifdef MV_DEBUG_INIT
#define DEBUG_INIT_S(s) puts(s)
#define DEBUG_INIT_D(d, l) printf("%x", d)
#define DEBUG_INIT_D_10(d, l) printf("%d", d)
#else
#define DEBUG_INIT_S(s)
#define DEBUG_INIT_D(d, l)
#define DEBUG_INIT_D_10(d, l)
#endif
#ifdef MV_DEBUG_INIT_FULL
#define DEBUG_INIT_FULL_S(s) puts(s)
#define DEBUG_INIT_FULL_D(d, l) printf("%x", d)
#define DEBUG_INIT_FULL_D_10(d, l) printf("%d", d)
#define DEBUG_WR_REG(reg, val) \
{ DEBUG_INIT_S("Write Reg: 0x"); DEBUG_INIT_D((reg), 8); \
DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); }
#define DEBUG_RD_REG(reg, val) \
{ DEBUG_INIT_S("Read Reg: 0x"); DEBUG_INIT_D((reg), 8); \
DEBUG_INIT_S("= "); DEBUG_INIT_D((val), 8); DEBUG_INIT_S("\n"); }
#else
#define DEBUG_INIT_FULL_S(s)
#define DEBUG_INIT_FULL_D(d, l)
#define DEBUG_INIT_FULL_D_10(d, l)
#define DEBUG_WR_REG(reg, val)
#define DEBUG_RD_REG(reg, val)
#endif
#define DEBUG_INIT_FULL_C(s, d, l) \
{ DEBUG_INIT_FULL_S(s); \
DEBUG_INIT_FULL_D(d, l); \
DEBUG_INIT_FULL_S("\n"); }
#define DEBUG_INIT_C(s, d, l) \
{ DEBUG_INIT_S(s); DEBUG_INIT_D(d, l); DEBUG_INIT_S("\n"); }
/*
* Debug (Enable/Disable modules) and Error report
*/
#ifdef BASIC_DEBUG
#define MV_DEBUG_WL
#define MV_DEBUG_RL
#define MV_DEBUG_DQS_RESULTS
#endif
#ifdef FULL_DEBUG
#define MV_DEBUG_WL
#define MV_DEBUG_RL
#define MV_DEBUG_DQS
#define MV_DEBUG_PBS
#define MV_DEBUG_DFS
#define MV_DEBUG_MAIN_FULL
#define MV_DEBUG_DFS_FULL
#define MV_DEBUG_DQS_FULL
#define MV_DEBUG_RL_FULL
#define MV_DEBUG_WL_FULL
#endif
#if defined(CONFIG_ARMADA_38X)
#include "ddr3_a38x.h"
#include "ddr3_a38x_topology.h"
#endif
/* The following is a list of Marvell status */
#define MV_ERROR (-1)
#define MV_OK (0x00) /* Operation succeeded */
#define MV_FAIL (0x01) /* Operation failed */
#define MV_BAD_VALUE (0x02) /* Illegal value (general) */
#define MV_OUT_OF_RANGE (0x03) /* The value is out of range */
#define MV_BAD_PARAM (0x04) /* Illegal parameter in function called */
#define MV_BAD_PTR (0x05) /* Illegal pointer value */
#define MV_BAD_SIZE (0x06) /* Illegal size */
#define MV_BAD_STATE (0x07) /* Illegal state of state machine */
#define MV_SET_ERROR (0x08) /* Set operation failed */
#define MV_GET_ERROR (0x09) /* Get operation failed */
#define MV_CREATE_ERROR (0x0a) /* Fail while creating an item */
#define MV_NOT_FOUND (0x0b) /* Item not found */
#define MV_NO_MORE (0x0c) /* No more items found */
#define MV_NO_SUCH (0x0d) /* No such item */
#define MV_TIMEOUT (0x0e) /* Time Out */
#define MV_NO_CHANGE (0x0f) /* Parameter(s) is already in this value */
#define MV_NOT_SUPPORTED (0x10) /* This request is not support */
#define MV_NOT_IMPLEMENTED (0x11) /* Request supported but not implemented*/
#define MV_NOT_INITIALIZED (0x12) /* The item is not initialized */
#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */
#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */
#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */
Fix spelling of "occurred". Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-01 02:18:00 +00:00
#define MV_INIT_ERROR (0x16) /* Error occurred while INIT process */
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
#define MV_HW_ERROR (0x17) /* Hardware error */
#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */
#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */
#define MV_NOT_READY (0x1a) /* The other side is not ready yet */
#define MV_ALREADY_EXIST (0x1b) /* Tried to create existing item */
#define MV_OUT_OF_CPU_MEM (0x1c) /* Cpu memory allocation failed. */
#define MV_NOT_STARTED (0x1d) /* Not started yet */
#define MV_BUSY (0x1e) /* Item is busy. */
#define MV_TERMINATE (0x1f) /* Item terminates it's work. */
#define MV_NOT_ALIGNED (0x20) /* Wrong alignment */
#define MV_NOT_ALLOWED (0x21) /* Operation NOT allowed */
#define MV_WRITE_PROTECT (0x22) /* Write protected */
#define MV_INVALID (int)(-1)
/* For checking function return values */
#define CHECK_STATUS(orig_func) \
{ \
int status; \
status = orig_func; \
if (MV_OK != status) \
return status; \
}
enum log_level {
MV_LOG_LEVEL_0,
MV_LOG_LEVEL_1,
MV_LOG_LEVEL_2,
MV_LOG_LEVEL_3
};
/* Globals */
extern u8 debug_training;
extern u8 is_reg_dump;
extern u8 generic_init_controller;
extern u32 freq_val[];
extern u32 is_pll_old;
extern struct cl_val_per_freq cas_latency_table[];
extern struct pattern_info pattern_table[];
extern struct cl_val_per_freq cas_write_latency_table[];
extern u8 debug_training;
extern u8 debug_centralization, debug_training_ip, debug_training_bist,
debug_pbs, debug_training_static, debug_leveling;
extern u32 pipe_multicast_mask;
extern struct hws_tip_config_func_db config_func_info[];
extern u8 cs_mask_reg[];
extern u8 twr_mask_table[];
extern u8 cl_mask_table[];
extern u8 cwl_mask_table[];
extern u16 rfc_table[];
extern u32 speed_bin_table_t_rc[];
extern u32 speed_bin_table_t_rcd_t_rp[];
extern u32 ck_delay, ck_delay_16;
extern u32 g_zpri_data;
extern u32 g_znri_data;
extern u32 g_zpri_ctrl;
extern u32 g_znri_ctrl;
extern u32 g_zpodt_data;
extern u32 g_znodt_data;
extern u32 g_zpodt_ctrl;
extern u32 g_znodt_ctrl;
extern u32 g_dic;
ddr: marvell: only assert M_ODT[0] on write for a single CS When using only a single DDR chip select only assert M_ODT[0] on write. Do not assert it on read and do not assert M_ODT[1] at all. Also set tODT_OFF_WR to 0x9 which contradicts the recommendation from the functional spec but is what Marvell's binary training blob does and seems to give better results when ODT is active during writes. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-01-18 04:16:07 +00:00
extern u32 g_odt_config_2cs;
extern u32 g_odt_config_1cs;
arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the Armada A38x boot image. Not linked with the main U-Boot. With this code addition and the serdes/PHY setup code, the Armada A38x support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Note: This code has undergone many hours (days!) of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. Signed-off-by: Stefan Roese <sr@denx.de>
2015-03-26 14:36:56 +00:00
extern u32 g_rtt_nom;
extern u8 debug_training_access;
extern u8 debug_training_a38x;
extern u32 first_active_if;
extern enum hws_ddr_freq init_freq;
extern u32 delay_enable, ck_delay, ck_delay_16, ca_delay;
extern u32 mask_tune_func;
extern u32 rl_version;
extern int rl_mid_freq_wa;
extern u8 calibration_update_control; /* 2 external only, 1 is internal only */
extern enum hws_ddr_freq medium_freq;
extern u32 ck_delay, ck_delay_16;
extern enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM];
extern u32 first_active_if;
extern u32 mask_tune_func;
extern u32 freq_val[];
extern enum hws_ddr_freq init_freq;
extern enum hws_ddr_freq low_freq;
extern enum hws_ddr_freq medium_freq;
extern u8 generic_init_controller;
extern enum auto_tune_stage training_stage;
extern u32 is_pll_before_init;
extern u32 is_adll_calib_before_init;
extern u32 is_dfs_in_init;
extern int wl_debug_delay;
extern u32 silicon_delay[HWS_MAX_DEVICE_NUM];
extern u32 p_finger;
extern u32 n_finger;
extern u32 freq_val[DDR_FREQ_LIMIT];
extern u32 start_pattern, end_pattern;
extern u32 phy_reg0_val;
extern u32 phy_reg1_val;
extern u32 phy_reg2_val;
extern u32 phy_reg3_val;
extern enum hws_pattern sweep_pattern;
extern enum hws_pattern pbs_pattern;
extern u8 is_rzq6;
extern u32 znri_data_phy_val;
extern u32 zpri_data_phy_val;
extern u32 znri_ctrl_phy_val;
extern u32 zpri_ctrl_phy_val;
extern u8 debug_training_access;
extern u32 finger_test, p_finger_start, p_finger_end, n_finger_start,
n_finger_end, p_finger_step, n_finger_step;
extern u32 mode2_t;
extern u32 xsb_validate_type;
extern u32 xsb_validation_base_address;
extern u32 odt_additional;
extern u32 debug_mode;
extern u32 delay_enable;
extern u32 ca_delay;
extern u32 debug_dunit;
extern u32 clamp_tbl[];
extern u32 freq_mask[HWS_MAX_DEVICE_NUM][DDR_FREQ_LIMIT];
extern u32 start_pattern, end_pattern;
extern u32 maxt_poll_tries;
extern u32 is_bist_reset_bit;
extern u8 debug_training_bist;
extern u8 vref_window_size[MAX_INTERFACE_NUM][MAX_BUS_NUM];
extern u32 debug_mode;
extern u32 effective_cs;
extern int ddr3_tip_centr_skip_min_win_check;
extern u32 *dq_map_table;
extern enum auto_tune_stage training_stage;
extern u8 debug_centralization;
extern u32 delay_enable;
extern u32 start_pattern, end_pattern;
extern u32 freq_val[DDR_FREQ_LIMIT];
extern u8 debug_training_hw_alg;
extern enum auto_tune_stage training_stage;
extern u8 debug_training_ip;
extern enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM];
extern enum auto_tune_stage training_stage;
extern u32 effective_cs;
extern u8 debug_leveling;
extern enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM];
extern enum auto_tune_stage training_stage;
extern u32 rl_version;
extern struct cl_val_per_freq cas_latency_table[];
extern u32 start_xsb_offset;
extern u32 debug_mode;
extern u32 odt_config;
extern u32 effective_cs;
extern u32 phy_reg1_val;
extern u8 debug_pbs;
extern u32 effective_cs;
extern u16 mask_results_dq_reg_map[];
extern enum hws_ddr_freq medium_freq;
extern u32 freq_val[];
extern enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM];
extern enum auto_tune_stage training_stage;
extern u32 debug_mode;
extern u32 *dq_map_table;
extern u32 vref;
extern struct cl_val_per_freq cas_latency_table[];
extern u32 target_freq;
extern struct hws_tip_config_func_db config_func_info[HWS_MAX_DEVICE_NUM];
extern u32 clamp_tbl[];
extern u32 init_freq;
/* list of allowed frequency listed in order of enum hws_ddr_freq */
extern u32 freq_val[];
extern u8 debug_training_static;
extern u32 first_active_if;
/* Prototypes */
int ddr3_tip_enable_init_sequence(u32 dev_num);
int ddr3_tip_init_a38x(u32 dev_num, u32 board_id);
int ddr3_hws_hw_training(void);
int ddr3_silicon_pre_init(void);
int ddr3_silicon_post_init(void);
int ddr3_post_run_alg(void);
int ddr3_if_ecc_enabled(void);
void ddr3_new_tip_ecc_scrub(void);
void ddr3_print_version(void);
void ddr3_new_tip_dlb_config(void);
struct hws_topology_map *ddr3_get_topology_map(void);
int ddr3_if_ecc_enabled(void);
int ddr3_tip_reg_write(u32 dev_num, u32 reg_addr, u32 data);
int ddr3_tip_reg_read(u32 dev_num, u32 reg_addr, u32 *data, u32 reg_mask);
int ddr3_silicon_get_ddr_target_freq(u32 *ddr_freq);
int ddr3_tip_a38x_get_freq_config(u8 dev_num, enum hws_ddr_freq freq,
struct hws_tip_freq_config_info
*freq_config_info);
int ddr3_a38x_update_topology_map(u32 dev_num,
struct hws_topology_map *topology_map);
int ddr3_tip_a38x_get_init_freq(int dev_num, enum hws_ddr_freq *freq);
int ddr3_tip_a38x_get_medium_freq(int dev_num, enum hws_ddr_freq *freq);
int ddr3_tip_a38x_if_read(u8 dev_num, enum hws_access_type interface_access,
u32 if_id, u32 reg_addr, u32 *data, u32 mask);
int ddr3_tip_a38x_if_write(u8 dev_num, enum hws_access_type interface_access,
u32 if_id, u32 reg_addr, u32 data, u32 mask);
int ddr3_tip_a38x_get_device_info(u8 dev_num,
struct ddr3_device_info *info_ptr);
int ddr3_tip_init_a38x(u32 dev_num, u32 board_id);
int print_adll(u32 dev_num, u32 adll[MAX_INTERFACE_NUM * MAX_BUS_NUM]);
int ddr3_tip_restore_dunit_regs(u32 dev_num);
void print_topology(struct hws_topology_map *topology_db);
u32 mv_board_id_get(void);
int ddr3_load_topology_map(void);
int ddr3_tip_init_specific_reg_config(u32 dev_num,
struct reg_data *reg_config_arr);
u32 ddr3_tip_get_init_freq(void);
void ddr3_hws_set_log_level(enum ddr_lib_debug_block block, u8 level);
int ddr3_tip_tune_training_params(u32 dev_num,
struct tune_train_params *params);
void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps);
int ddr3_fast_path_dynamic_cs_size_config(u32 cs_ena);
void ddr3_fast_path_static_cs_size_config(u32 cs_ena);
u32 ddr3_get_device_width(u32 cs);
u32 mv_board_id_index_get(u32 board_id);
u32 mv_board_id_get(void);
u32 ddr3_get_bus_width(void);
void ddr3_set_log_level(u32 n_log_level);
int ddr3_calc_mem_cs_size(u32 cs, u32 *cs_size);
int hws_ddr3_cs_base_adr_calc(u32 if_id, u32 cs, u32 *cs_base_addr);
int ddr3_tip_print_pbs_result(u32 dev_num, u32 cs_num, enum pbs_dir pbs_mode);
int ddr3_tip_clean_pbs_result(u32 dev_num, enum pbs_dir pbs_mode);
int ddr3_tip_static_round_trip_arr_build(u32 dev_num,
struct trip_delay_element *table_ptr,
int is_wl, u32 *round_trip_delay_arr);
u32 hws_ddr3_tip_max_cs_get(void);
/*
* Accessor functions for the registers
*/
static inline void reg_write(u32 addr, u32 val)
{
writel(val, INTER_REGS_BASE + addr);
}
static inline u32 reg_read(u32 addr)
{
return readl(INTER_REGS_BASE + addr);
}
static inline void reg_bit_set(u32 addr, u32 mask)
{
setbits_le32(INTER_REGS_BASE + addr, mask);
}
static inline void reg_bit_clr(u32 addr, u32 mask)
{
clrbits_le32(INTER_REGS_BASE + addr, mask);
}
#endif /* _DDR3_INIT_H */
Reference in a new issue Copy permalink