u-boot/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c

658 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <dm.h>
#include <log.h>
#include <dm/pinctrl.h>
#include <regmap.h>
#include <syscon.h>
#include <fdtdec.h>
#include <linux/bitops.h>
#include <linux/libfdt.h>
#include "pinctrl-rockchip.h"
#define MAX_ROCKCHIP_PINS_ENTRIES 30
#define MAX_ROCKCHIP_GPIO_PER_BANK 32
#define RK_FUNC_GPIO 0
static int rockchip_verify_config(struct udevice *dev, u32 bank, u32 pin)
{
struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
if (bank >= ctrl->nr_banks) {
debug("pin conf bank %d >= nbanks %d\n", bank, ctrl->nr_banks);
return -EINVAL;
}
if (pin >= MAX_ROCKCHIP_GPIO_PER_BANK) {
debug("pin conf pin %d >= %d\n", pin,
MAX_ROCKCHIP_GPIO_PER_BANK);
return -EINVAL;
}
return 0;
}
void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin,
int *reg, u8 *bit, int *mask)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
struct rockchip_mux_recalced_data *data;
int i;
for (i = 0; i < ctrl->niomux_recalced; i++) {
data = &ctrl->iomux_recalced[i];
if (data->num == bank->bank_num &&
data->pin == pin)
break;
}
if (i >= ctrl->niomux_recalced)
return;
*reg = data->reg;
*mask = data->mask;
*bit = data->bit;
}
static enum rockchip_pin_route_type
rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin,
int mux, u32 *reg, u32 *value)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
struct rockchip_mux_route_data *data;
int i;
for (i = 0; i < ctrl->niomux_routes; i++) {
data = &ctrl->iomux_routes[i];
if (data->bank_num == bank->bank_num &&
data->pin == pin && data->func == mux)
break;
}
if (i >= ctrl->niomux_routes)
return ROUTE_TYPE_INVALID;
*reg = data->route_offset;
*value = data->route_val;
return data->route_type;
}
int rockchip_get_mux_data(int mux_type, int pin, u8 *bit, int *mask)
{
int offset = 0;
if (mux_type & IOMUX_WIDTH_4BIT) {
if ((pin % 8) >= 4)
offset = 0x4;
*bit = (pin % 4) * 4;
*mask = 0xf;
} else if (mux_type & IOMUX_WIDTH_3BIT) {
/*
* pin0 ~ pin4 are at first register, and
* pin5 ~ pin7 are at second register.
*/
if ((pin % 8) >= 5)
offset = 0x4;
*bit = (pin % 8 % 5) * 3;
*mask = 0x7;
} else {
*bit = (pin % 8) * 2;
*mask = 0x3;
}
return offset;
}
static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
int iomux_num = (pin / 8);
struct regmap *regmap;
unsigned int val;
int reg, ret, mask, mux_type;
u8 bit;
if (iomux_num > 3)
return -EINVAL;
if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
debug("pin %d is unrouted\n", pin);
return -EINVAL;
}
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY)
return RK_FUNC_GPIO;
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
? priv->regmap_pmu : priv->regmap_base;
/* get basic quadrupel of mux registers and the correct reg inside */
mux_type = bank->iomux[iomux_num].type;
reg = bank->iomux[iomux_num].offset;
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
if (bank->recalced_mask & BIT(pin))
rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
ret = regmap_read(regmap, reg, &val);
if (ret)
return ret;
return ((val >> bit) & mask);
}
static int rockchip_pinctrl_get_gpio_mux(struct udevice *dev, int banknum,
int index)
{ struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
return rockchip_get_mux(&ctrl->pin_banks[banknum], index);
}
static int rockchip_verify_mux(struct rockchip_pin_bank *bank,
int pin, int mux)
{
int iomux_num = (pin / 8);
if (iomux_num > 3)
return -EINVAL;
if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
debug("pin %d is unrouted\n", pin);
return -EINVAL;
}
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) {
if (mux != IOMUX_GPIO_ONLY) {
debug("pin %d only supports a gpio mux\n", pin);
return -ENOTSUPP;
}
}
return 0;
}
/*
* Set a new mux function for a pin.
*
* The register is divided into the upper and lower 16 bit. When changing
* a value, the previous register value is not read and changed. Instead
* it seems the changed bits are marked in the upper 16 bit, while the
* changed value gets set in the same offset in the lower 16 bit.
* All pin settings seem to be 2 bit wide in both the upper and lower
* parts.
* @bank: pin bank to change
* @pin: pin to change
* @mux: new mux function to set
*/
static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
int iomux_num = (pin / 8);
int ret;
ret = rockchip_verify_mux(bank, pin, mux);
if (ret < 0)
return ret;
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY)
return 0;
debug("setting mux of GPIO%d-%d to %d\n", bank->bank_num, pin, mux);
if (!ctrl->set_mux)
return -ENOTSUPP;
ret = ctrl->set_mux(bank, pin, mux);
if (ret)
return ret;
if (bank->route_mask & BIT(pin)) {
struct regmap *regmap;
u32 route_reg = 0, route_val = 0;
ret = rockchip_get_mux_route(bank, pin, mux,
&route_reg, &route_val);
switch (ret) {
case ROUTE_TYPE_DEFAULT:
if (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
regmap = priv->regmap_pmu;
else if (bank->iomux[iomux_num].type & IOMUX_L_SOURCE_PMU)
regmap = (pin % 8 < 4) ? priv->regmap_pmu : priv->regmap_base;
else
regmap = priv->regmap_base;
regmap_write(regmap, route_reg, route_val);
break;
case ROUTE_TYPE_TOPGRF:
regmap_write(priv->regmap_base, route_reg, route_val);
break;
case ROUTE_TYPE_PMUGRF:
regmap_write(priv->regmap_pmu, route_reg, route_val);
break;
case ROUTE_TYPE_INVALID:
fallthrough;
default:
break;
}
}
return 0;
}
static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = {
{ 2, 4, 8, 12, -1, -1, -1, -1 },
{ 3, 6, 9, 12, -1, -1, -1, -1 },
{ 5, 10, 15, 20, -1, -1, -1, -1 },
{ 4, 6, 8, 10, 12, 14, 16, 18 },
{ 4, 7, 10, 13, 16, 19, 22, 26 }
};
int rockchip_translate_drive_value(int type, int strength)
{
int i, ret;
ret = -EINVAL;
for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[type]); i++) {
if (rockchip_perpin_drv_list[type][i] == strength) {
ret = i;
break;
} else if (rockchip_perpin_drv_list[type][i] < 0) {
ret = rockchip_perpin_drv_list[type][i];
break;
}
}
return ret;
}
static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
int pin_num, int strength)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
debug("setting drive of GPIO%d-%d to %d\n", bank->bank_num,
pin_num, strength);
if (!ctrl->set_drive)
return -ENOTSUPP;
return ctrl->set_drive(bank, pin_num, strength);
}
static int rockchip_pull_list[PULL_TYPE_MAX][4] = {
{
PIN_CONFIG_BIAS_DISABLE,
PIN_CONFIG_BIAS_PULL_UP,
PIN_CONFIG_BIAS_PULL_DOWN,
PIN_CONFIG_BIAS_BUS_HOLD
},
{
PIN_CONFIG_BIAS_DISABLE,
PIN_CONFIG_BIAS_PULL_DOWN,
PIN_CONFIG_BIAS_DISABLE,
PIN_CONFIG_BIAS_PULL_UP
},
};
int rockchip_translate_pull_value(int type, int pull)
{
int i, ret;
ret = -EINVAL;
for (i = 0; i < ARRAY_SIZE(rockchip_pull_list[type]);
i++) {
if (rockchip_pull_list[type][i] == pull) {
ret = i;
break;
}
}
return ret;
}
static int rockchip_set_pull(struct rockchip_pin_bank *bank,
int pin_num, int pull)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
debug("setting pull of GPIO%d-%d to %d\n", bank->bank_num,
pin_num, pull);
if (!ctrl->set_pull)
return -ENOTSUPP;
return ctrl->set_pull(bank, pin_num, pull);
}
static int rockchip_set_schmitt(struct rockchip_pin_bank *bank,
int pin_num, int enable)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
debug("setting input schmitt of GPIO%d-%d to %d\n", bank->bank_num,
pin_num, enable);
if (!ctrl->set_schmitt)
return -ENOTSUPP;
return ctrl->set_schmitt(bank, pin_num, enable);
}
/* set the pin config settings for a specified pin */
static int rockchip_pinconf_set(struct rockchip_pin_bank *bank,
u32 pin, u32 param, u32 arg)
{
int rc;
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
case PIN_CONFIG_BIAS_BUS_HOLD:
rc = rockchip_set_pull(bank, pin, param);
if (rc)
return rc;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
rc = rockchip_set_drive_perpin(bank, pin, arg);
if (rc < 0)
return rc;
break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
rc = rockchip_set_schmitt(bank, pin, arg);
if (rc < 0)
return rc;
break;
default:
break;
}
return 0;
}
static const struct pinconf_param rockchip_conf_params[] = {
{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
{ "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 },
{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
{ "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
};
static int rockchip_pinconf_prop_name_to_param(const char *property,
u32 *default_value)
{
const struct pinconf_param *p, *end;
p = rockchip_conf_params;
end = p + sizeof(rockchip_conf_params) / sizeof(struct pinconf_param);
/* See if this pctldev supports this parameter */
for (; p < end; p++) {
if (!strcmp(property, p->property)) {
*default_value = p->default_value;
return p->param;
}
}
*default_value = 0;
return -EPERM;
}
static int rockchip_pinctrl_set_state(struct udevice *dev,
struct udevice *config)
{
struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
struct rockchip_pin_ctrl *ctrl = priv->ctrl;
u32 cells[MAX_ROCKCHIP_PINS_ENTRIES * 4];
u32 bank, pin, mux, conf, arg, default_val;
int ret, count, i;
const char *prop_name;
const void *value;
int prop_len, param;
const u32 *data;
ofnode node;
pinctrl: rockchip: Fix Data Abort exception in SPL Using CONFIG_ARMV8_SPL_EXCEPTION_VECTORS=y and CONFIG_OF_LIVE=y triggers a Data Abort exception from unaligned memory access when the pinctrl driver iterate node properties, e.g. for UART2 on RK3568. setting mux of GPIO0-24 to 1 setting mux of GPIO0-24 to 1 "Synchronous Abort" handler, esr 0x96000021 elr: 000000000000e554 lr : 000000000000e54c x 0: 0000000000000a5c x 1: 0000000000000a5c x 2: 0000000000000007 x 3: 0000000000000065 x 4: 0000000000000007 x 5: 0000000000022d4e x 6: 0000000000000a7c x 7: 00000000000227a4 x 8: 0000000000021cf0 x 9: 0000000000000a7c x10: 0000000000021cf0 x11: 0000000000021cf0 x12: 00000000003fda1c x13: 0000000000000007 x14: 00000000003fd9ec x15: 000000000001c0ff x16: 0000000007000000 x17: 00000000fdccd028 x18: 00000000003fde20 x19: 0000000000000018 x20: 0000000000020670 x21: 0000000000000000 x22: 00000000003fdb00 x23: 00000000003fef90 x24: 0000000000020688 x25: 0000000000000000 x26: 0000000000000001 x27: 00000000003ffc50 x28: 0000000000000000 x29: 00000000003fda60 Code: b94083e1 97ffd508 93407c01 37f81260 (f9401038) Resetting CPU ... Fix this by replacing the loop to access node properties with use of ofnode_for_each_prop instead of the current ifdef. Also continue to next prop instead of aborting at first sign of an unknown property. This fixes the Data Abort exception and also pinconf of e.g. pull and drive in SPL, e.g. for UART2 on RK3568. setting mux of GPIO0-24 to 1 setting mux of GPIO0-24 to 1 setting pull of GPIO0-24 to 5 setting mux of GPIO0-25 to 1 setting mux of GPIO0-25 to 1 setting pull of GPIO0-25 to 5 Fixes: e7ae4cf27a6d ("pinctrl: rockchip: Add common rockchip pinctrl driver") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-06-08 10:59:38 +00:00
struct ofprop prop;
data = dev_read_prop(config, "rockchip,pins", &count);
if (count < 0) {
debug("%s: bad array size %d\n", __func__, count);
return -EINVAL;
}
count /= sizeof(u32);
if (count > MAX_ROCKCHIP_PINS_ENTRIES * 4) {
debug("%s: unsupported pins array count %d\n",
__func__, count);
return -EINVAL;
}
for (i = 0; i < count; i++)
cells[i] = fdt32_to_cpu(data[i]);
for (i = 0; i < (count >> 2); i++) {
bank = cells[4 * i + 0];
pin = cells[4 * i + 1];
mux = cells[4 * i + 2];
conf = cells[4 * i + 3];
ret = rockchip_verify_config(dev, bank, pin);
if (ret)
return ret;
ret = rockchip_set_mux(&ctrl->pin_banks[bank], pin, mux);
if (ret)
return ret;
node = ofnode_get_by_phandle(conf);
if (!ofnode_valid(node))
return -ENODEV;
pinctrl: rockchip: Fix Data Abort exception in SPL Using CONFIG_ARMV8_SPL_EXCEPTION_VECTORS=y and CONFIG_OF_LIVE=y triggers a Data Abort exception from unaligned memory access when the pinctrl driver iterate node properties, e.g. for UART2 on RK3568. setting mux of GPIO0-24 to 1 setting mux of GPIO0-24 to 1 "Synchronous Abort" handler, esr 0x96000021 elr: 000000000000e554 lr : 000000000000e54c x 0: 0000000000000a5c x 1: 0000000000000a5c x 2: 0000000000000007 x 3: 0000000000000065 x 4: 0000000000000007 x 5: 0000000000022d4e x 6: 0000000000000a7c x 7: 00000000000227a4 x 8: 0000000000021cf0 x 9: 0000000000000a7c x10: 0000000000021cf0 x11: 0000000000021cf0 x12: 00000000003fda1c x13: 0000000000000007 x14: 00000000003fd9ec x15: 000000000001c0ff x16: 0000000007000000 x17: 00000000fdccd028 x18: 00000000003fde20 x19: 0000000000000018 x20: 0000000000020670 x21: 0000000000000000 x22: 00000000003fdb00 x23: 00000000003fef90 x24: 0000000000020688 x25: 0000000000000000 x26: 0000000000000001 x27: 00000000003ffc50 x28: 0000000000000000 x29: 00000000003fda60 Code: b94083e1 97ffd508 93407c01 37f81260 (f9401038) Resetting CPU ... Fix this by replacing the loop to access node properties with use of ofnode_for_each_prop instead of the current ifdef. Also continue to next prop instead of aborting at first sign of an unknown property. This fixes the Data Abort exception and also pinconf of e.g. pull and drive in SPL, e.g. for UART2 on RK3568. setting mux of GPIO0-24 to 1 setting mux of GPIO0-24 to 1 setting pull of GPIO0-24 to 5 setting mux of GPIO0-25 to 1 setting mux of GPIO0-25 to 1 setting pull of GPIO0-25 to 5 Fixes: e7ae4cf27a6d ("pinctrl: rockchip: Add common rockchip pinctrl driver") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-06-08 10:59:38 +00:00
ofnode_for_each_prop(prop, node) {
value = ofprop_get_property(&prop, &prop_name, &prop_len);
if (!value)
pinctrl: rockchip: Fix Data Abort exception in SPL Using CONFIG_ARMV8_SPL_EXCEPTION_VECTORS=y and CONFIG_OF_LIVE=y triggers a Data Abort exception from unaligned memory access when the pinctrl driver iterate node properties, e.g. for UART2 on RK3568. setting mux of GPIO0-24 to 1 setting mux of GPIO0-24 to 1 "Synchronous Abort" handler, esr 0x96000021 elr: 000000000000e554 lr : 000000000000e54c x 0: 0000000000000a5c x 1: 0000000000000a5c x 2: 0000000000000007 x 3: 0000000000000065 x 4: 0000000000000007 x 5: 0000000000022d4e x 6: 0000000000000a7c x 7: 00000000000227a4 x 8: 0000000000021cf0 x 9: 0000000000000a7c x10: 0000000000021cf0 x11: 0000000000021cf0 x12: 00000000003fda1c x13: 0000000000000007 x14: 00000000003fd9ec x15: 000000000001c0ff x16: 0000000007000000 x17: 00000000fdccd028 x18: 00000000003fde20 x19: 0000000000000018 x20: 0000000000020670 x21: 0000000000000000 x22: 00000000003fdb00 x23: 00000000003fef90 x24: 0000000000020688 x25: 0000000000000000 x26: 0000000000000001 x27: 00000000003ffc50 x28: 0000000000000000 x29: 00000000003fda60 Code: b94083e1 97ffd508 93407c01 37f81260 (f9401038) Resetting CPU ... Fix this by replacing the loop to access node properties with use of ofnode_for_each_prop instead of the current ifdef. Also continue to next prop instead of aborting at first sign of an unknown property. This fixes the Data Abort exception and also pinconf of e.g. pull and drive in SPL, e.g. for UART2 on RK3568. setting mux of GPIO0-24 to 1 setting mux of GPIO0-24 to 1 setting pull of GPIO0-24 to 5 setting mux of GPIO0-25 to 1 setting mux of GPIO0-25 to 1 setting pull of GPIO0-25 to 5 Fixes: e7ae4cf27a6d ("pinctrl: rockchip: Add common rockchip pinctrl driver") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-06-08 10:59:38 +00:00
continue;
param = rockchip_pinconf_prop_name_to_param(prop_name,
&default_val);
if (param < 0)
pinctrl: rockchip: Fix Data Abort exception in SPL Using CONFIG_ARMV8_SPL_EXCEPTION_VECTORS=y and CONFIG_OF_LIVE=y triggers a Data Abort exception from unaligned memory access when the pinctrl driver iterate node properties, e.g. for UART2 on RK3568. setting mux of GPIO0-24 to 1 setting mux of GPIO0-24 to 1 "Synchronous Abort" handler, esr 0x96000021 elr: 000000000000e554 lr : 000000000000e54c x 0: 0000000000000a5c x 1: 0000000000000a5c x 2: 0000000000000007 x 3: 0000000000000065 x 4: 0000000000000007 x 5: 0000000000022d4e x 6: 0000000000000a7c x 7: 00000000000227a4 x 8: 0000000000021cf0 x 9: 0000000000000a7c x10: 0000000000021cf0 x11: 0000000000021cf0 x12: 00000000003fda1c x13: 0000000000000007 x14: 00000000003fd9ec x15: 000000000001c0ff x16: 0000000007000000 x17: 00000000fdccd028 x18: 00000000003fde20 x19: 0000000000000018 x20: 0000000000020670 x21: 0000000000000000 x22: 00000000003fdb00 x23: 00000000003fef90 x24: 0000000000020688 x25: 0000000000000000 x26: 0000000000000001 x27: 00000000003ffc50 x28: 0000000000000000 x29: 00000000003fda60 Code: b94083e1 97ffd508 93407c01 37f81260 (f9401038) Resetting CPU ... Fix this by replacing the loop to access node properties with use of ofnode_for_each_prop instead of the current ifdef. Also continue to next prop instead of aborting at first sign of an unknown property. This fixes the Data Abort exception and also pinconf of e.g. pull and drive in SPL, e.g. for UART2 on RK3568. setting mux of GPIO0-24 to 1 setting mux of GPIO0-24 to 1 setting pull of GPIO0-24 to 5 setting mux of GPIO0-25 to 1 setting mux of GPIO0-25 to 1 setting pull of GPIO0-25 to 5 Fixes: e7ae4cf27a6d ("pinctrl: rockchip: Add common rockchip pinctrl driver") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-06-08 10:59:38 +00:00
continue;
if (prop_len >= sizeof(fdt32_t))
arg = fdt32_to_cpu(*(fdt32_t *)value);
else
arg = default_val;
ret = rockchip_pinconf_set(&ctrl->pin_banks[bank], pin,
param, arg);
if (ret) {
debug("%s: rockchip_pinconf_set fail: %d\n",
__func__, ret);
return ret;
}
}
}
return 0;
}
const struct pinctrl_ops rockchip_pinctrl_ops = {
.set_state = rockchip_pinctrl_set_state,
.get_gpio_mux = rockchip_pinctrl_get_gpio_mux,
};
/* retrieve the soc specific data */
static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(struct udevice *dev)
{
struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
struct rockchip_pin_ctrl *ctrl =
(struct rockchip_pin_ctrl *)dev_get_driver_data(dev);
struct rockchip_pin_bank *bank;
int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j;
grf_offs = ctrl->grf_mux_offset;
pmu_offs = ctrl->pmu_mux_offset;
drv_pmu_offs = ctrl->pmu_drv_offset;
drv_grf_offs = ctrl->grf_drv_offset;
bank = ctrl->pin_banks;
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
int bank_pins = 0;
bank->priv = priv;
bank->pin_base = ctrl->nr_pins;
ctrl->nr_pins += bank->nr_pins;
/* calculate iomux and drv offsets */
for (j = 0; j < 4; j++) {
struct rockchip_iomux *iom = &bank->iomux[j];
struct rockchip_drv *drv = &bank->drv[j];
int inc;
if (bank_pins >= bank->nr_pins)
break;
/* preset iomux offset value, set new start value */
if (iom->offset >= 0) {
if (iom->type & IOMUX_SOURCE_PMU)
pmu_offs = iom->offset;
else
grf_offs = iom->offset;
} else { /* set current iomux offset */
iom->offset = (iom->type & IOMUX_SOURCE_PMU) ?
pmu_offs : grf_offs;
}
/* preset drv offset value, set new start value */
if (drv->offset >= 0) {
if (iom->type & IOMUX_SOURCE_PMU)
drv_pmu_offs = drv->offset;
else
drv_grf_offs = drv->offset;
} else { /* set current drv offset */
drv->offset = (iom->type & IOMUX_SOURCE_PMU) ?
drv_pmu_offs : drv_grf_offs;
}
debug("bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n",
i, j, iom->offset, drv->offset);
/*
* Increase offset according to iomux width.
* 4bit iomux'es are spread over two registers.
*/
inc = (iom->type & (IOMUX_WIDTH_4BIT |
IOMUX_WIDTH_3BIT |
IOMUX_8WIDTH_2BIT)) ? 8 : 4;
if ((iom->type & IOMUX_SOURCE_PMU) || (iom->type & IOMUX_L_SOURCE_PMU))
pmu_offs += inc;
else
grf_offs += inc;
/*
* Increase offset according to drv width.
* 3bit drive-strenth'es are spread over two registers.
*/
if ((drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) ||
(drv->drv_type == DRV_TYPE_IO_3V3_ONLY))
inc = 8;
else
inc = 4;
if (iom->type & IOMUX_SOURCE_PMU)
drv_pmu_offs += inc;
else
drv_grf_offs += inc;
bank_pins += 8;
}
/* calculate the per-bank recalced_mask */
for (j = 0; j < ctrl->niomux_recalced; j++) {
int pin = 0;
if (ctrl->iomux_recalced[j].num == bank->bank_num) {
pin = ctrl->iomux_recalced[j].pin;
bank->recalced_mask |= BIT(pin);
}
}
/* calculate the per-bank route_mask */
for (j = 0; j < ctrl->niomux_routes; j++) {
int pin = 0;
if (ctrl->iomux_routes[j].bank_num == bank->bank_num) {
pin = ctrl->iomux_routes[j].pin;
bank->route_mask |= BIT(pin);
}
}
}
return ctrl;
}
int rockchip_pinctrl_probe(struct udevice *dev)
{
struct rockchip_pinctrl_priv *priv = dev_get_priv(dev);
struct rockchip_pin_ctrl *ctrl;
struct udevice *syscon;
struct regmap *regmap;
int ret = 0;
/* get rockchip grf syscon phandle */
ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,grf",
&syscon);
if (ret) {
debug("unable to find rockchip,grf syscon device (%d)\n", ret);
return ret;
}
/* get grf-reg base address */
regmap = syscon_get_regmap(syscon);
if (!regmap) {
debug("unable to find rockchip grf regmap\n");
return -ENODEV;
}
priv->regmap_base = regmap;
/* option: get pmu-reg base address */
ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,pmu",
&syscon);
if (!ret) {
/* get pmugrf-reg base address */
regmap = syscon_get_regmap(syscon);
if (!regmap) {
debug("unable to find rockchip pmu regmap\n");
return -ENODEV;
}
priv->regmap_pmu = regmap;
}
ctrl = rockchip_pinctrl_get_soc_data(dev);
if (!ctrl) {
debug("driver data not available\n");
return -EINVAL;
}
priv->ctrl = ctrl;
return 0;
}