u-boot/configs/odroid-c2_defconfig

CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_MESON_GXBB=y
CONFIG_TARGET_ODROID_C2=y
CONFIG_IDENT_STRING=" odroid-c2"
CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-odroidc2"
CONFIG_DEBUG_UART=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_OF_CONTROL=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MESON=y
CONFIG_DM_MMC=y
CONFIG_MMC_MESON_GX=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXBB=y
CONFIG_DEBUG_UART_MESON=y
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
CONFIG_OF_LIBFDT_OVERLAY=y
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2016-05-08 06:30:16 +00:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_MESON=y`
			`CONFIG_MESON_GXBB=y`
			`CONFIG_TARGET_ODROID_C2=y`
Kconfig: Move config IDENT_STRING to Kconfig Move the config IDENT_STRING to Kconfig and migrate all boards [sivadur: Migrate zynq boards] Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> [trini: Update configs, add some default to sunxi Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com> 2016-07-29 10:01:47 +00:00			`CONFIG_IDENT_STRING=" odroid-c2"`
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2016-05-08 06:30:16 +00:00			`CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-odroidc2"`
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com> 2017-06-19 13:47:40 +00:00			`CONFIG_DEBUG_UART=y`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2017-12-19 01:19:09 +00:00			`CONFIG_OF_BOARD_SETUP=y`
common/Kconfig: Add DISPLAY_CPUINFO Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> 2016-10-08 18:41:44 +00:00			`# CONFIG_DISPLAY_CPUINFO is not set`
common: Add DISPLAY_BOARDINFO Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> 2016-10-12 01:33:46 +00:00			`# CONFIG_DISPLAY_BOARDINFO is not set`
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2016-05-08 06:30:16 +00:00			`# CONFIG_CMD_BDI is not set`
			`# CONFIG_CMD_IMI is not set`
			`# CONFIG_CMD_FPGA is not set`
odroid-c2: enable GPIO GPIOs are now supported on Meson GXBB, enable driver and command in the config. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-07-09 22:30:05 +00:00			`CONFIG_CMD_GPIO=y`
odroid-c2: enable I2C Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> 2017-10-29 09:09:01 +00:00			`CONFIG_CMD_I2C=y`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2017-08-14 23:58:53 +00:00			`# CONFIG_CMD_LOADS is not set`
			`CONFIG_CMD_MMC=y`
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2016-05-08 06:30:16 +00:00			`# CONFIG_CMD_SETEXPR is not set`
			`CONFIG_OF_CONTROL=y`
			`CONFIG_NET_RANDOM_ETHADDR=y`
odroid-c2: enable GPIO GPIOs are now supported on Meson GXBB, enable driver and command in the config. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2017-07-09 22:30:05 +00:00			`CONFIG_DM_GPIO=y`
odroid-c2: enable I2C Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> 2017-10-29 09:09:01 +00:00			`CONFIG_DM_I2C=y`
			`CONFIG_SYS_I2C_MESON=y`
odroid-c2: enable new Meson GX MMC driver in board defconfig Enable new Meson GX MMC driver in Odroid C2 defconfig. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> 2017-04-12 18:32:06 +00:00			`CONFIG_DM_MMC=y`
			`CONFIG_MMC_MESON_GX=y`
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2016-05-08 06:30:16 +00:00			`CONFIG_DM_ETH=y`
meson: odroid-c2: enable Ethernet support through the device tree Remove the device definition from board file, update the driver with the new compatible property and update config with necessary options. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2016-08-16 09:49:50 +00:00			`CONFIG_ETH_DESIGNWARE=y`
			`CONFIG_PINCTRL=y`
			`CONFIG_PINCTRL_MESON_GXBB=y`
arm: add initial support for Amlogic Meson and ODROID-C2 This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a board definition for ODROID-C2. This initial submission only supports UART and Ethernet (through the existing Designware driver). DTS files are the ones submitted to Linux arm-soc for 4.7 [1]. [1] https://patchwork.ozlabs.org/patch/603583/ Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 2016-05-08 06:30:16 +00:00			`CONFIG_DEBUG_UART_MESON=y`
			`CONFIG_DEBUG_UART_BASE=0xc81004c0`
			`CONFIG_DEBUG_UART_CLOCK=24000000`
			`CONFIG_DEBUG_UART_ANNOUNCE=y`
			`CONFIG_DEBUG_UART_SKIP_INIT=y`
			`CONFIG_MESON_SERIAL=y`
configs: Odroid C2: enable device tree overlays The Odroid C2 comes with several expansion options such as an RTC module. As these expansions are not considered in the Linux device tree they have to be enabled via device tree overlays. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> 2017-06-29 19:29:55 +00:00			`CONFIG_OF_LIBFDT_OVERLAY=y`