Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-18 02:38:56 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arc/include/asm/arcregs.h

81 lines
2.3 KiB
C
Raw Normal View History

arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_ARC_ARCREGS_H
#define _ASM_ARC_ARCREGS_H
arc: add more flavours of ARC700 series CPU Now we may select a particular version of ARC700: * ARC750D or * ARC770D It allows more flexible (or more fine tuned) configuration of U-Boot. Before that change we relied on minimal configuration but now we may use specific features of each CPU. Moreover allows us to escape manual selection of options that exist in both CPUs but may have say different version like MMUv2 in ARC750D vs MMUv3 in ARC770D. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-03 10:58:11 +00:00
#include <asm/cache.h>
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
/*
* ARC architecture has additional address space - auxiliary registers.
* These registers are mostly used for configuration purposes.
* These registers are not memory mapped and special commands are used for
* access: "lr"/"sr".
*/
#define ARC_AUX_IDENTITY 0x04
#define ARC_AUX_STATUS32 0x0a
/* Instruction cache related auxiliary registers */
#define ARC_AUX_IC_IVIC 0x10
#define ARC_AUX_IC_CTRL 0x11
#define ARC_AUX_IC_IVIL 0x19
arc: define and use PTAG AUX regs for MMUv3 only DC_PTAG and IC_PTAG registers only exist in MMUv3. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-03 10:58:12 +00:00
#if (CONFIG_ARC_MMU_VER == 3)
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
#define ARC_AUX_IC_PTAG 0x1E
#endif
arc: check caches existence before use Some cache operations ({i|d}cache_{enable|disable|status} or flush_dcache_all) are built and used even if CONFIG_SYS_{I|D}CACHE_OFF is set. This is required for force disable of caches on early boot. What if something was executed before U-boot and enabled caches (low-level bootloaders, previously run kernel etc.)? But if CPU doesn't really have caches any attempt to access cache-related AUX registers triggers instruction error exception. So for convenience we'll try to avoid exceptions by checking if CPU actually has caches (we check separately data and instruction cache existence) at all. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
2014-12-24 13:07:07 +00:00
#define ARC_BCR_IC_BUILD 0x77
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
/* Timer related auxiliary registers */
#define ARC_AUX_TIMER0_CNT 0x21 /* Timer 0 count */
#define ARC_AUX_TIMER0_CTRL 0x22 /* Timer 0 control */
#define ARC_AUX_TIMER0_LIMIT 0x23 /* Timer 0 limit */
drivers: timer: Introduce ARC timer driver This commit introduces timer driver for ARC. ARC timers are configured via ARC AUX registers so we use special functions to access timer control registers. This driver allows utilization of either timer0 or timer1 depending on which one is available in real hardware. Essentially only existing timers should be mentioned in board's Device Tree description. Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-21 11:49:47 +00:00
#define ARC_AUX_TIMER1_CNT 0x100 /* Timer 1 count */
#define ARC_AUX_TIMER1_CTRL 0x101 /* Timer 1 control */
#define ARC_AUX_TIMER1_LIMIT 0x102 /* Timer 1 limit */
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
#define ARC_AUX_INTR_VEC_BASE 0x25
/* Data cache related auxiliary registers */
#define ARC_AUX_DC_IVDC 0x47
#define ARC_AUX_DC_CTRL 0x48
#define ARC_AUX_DC_IVDL 0x4A
#define ARC_AUX_DC_FLSH 0x4B
#define ARC_AUX_DC_FLDL 0x4C
arc: define and use PTAG AUX regs for MMUv3 only DC_PTAG and IC_PTAG registers only exist in MMUv3. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-02-03 10:58:12 +00:00
#if (CONFIG_ARC_MMU_VER == 3)
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
#define ARC_AUX_DC_PTAG 0x5C
#endif
arc: check caches existence before use Some cache operations ({i|d}cache_{enable|disable|status} or flush_dcache_all) are built and used even if CONFIG_SYS_{I|D}CACHE_OFF is set. This is required for force disable of caches on early boot. What if something was executed before U-boot and enabled caches (low-level bootloaders, previously run kernel etc.)? But if CPU doesn't really have caches any attempt to access cache-related AUX registers triggers instruction error exception. So for convenience we'll try to avoid exceptions by checking if CPU actually has caches (we check separately data and instruction cache existence) at all. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
2014-12-24 13:07:07 +00:00
#define ARC_BCR_DC_BUILD 0x72
arc: add support for SLC (System Level Cache, AKA L2-cache) ARCv2 cores may have built-in SLC (System Level Cache, AKA L2-cache). This change adds functions required for controlling SLC: * slc_enable/disable * slc_flush/invalidate For now we just disable SLC to escape DMA coherency issues until either: * SLC flush/invalidate is supported in DMA APIin U-Boot * hardware DMA coherency is implemented (that might be board specific so probably we'll need to have a separate Kconfig option for controlling SLC explicitly) Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-03-30 10:36:04 +00:00
#define ARC_BCR_SLC 0xce
arc: significant cache rework [1] Align cache management functions to those in Linux kernel. I.e.: a) Use the same functions for all cache ops (D$ Inv/Flush) b) Split cache ops in 3 sub-functions: "before", "lineloop" and "after". That way we may re-use "before" and "after" functions for region and full cache ops. [2] Implement full-functional L2 (SLC) management. Before SLC was simply disabled early on boot. It's also possible to enable or disable L2 cache from config utility. [3] Disable/enable corresponding caches early on boot. So if U-Boot is configured to use caches they will be used at all times (this is useful in partucular for speed-up of relocation). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-05-18 13:56:26 +00:00
#define ARC_AUX_SLC_CONFIG 0x901
#define ARC_AUX_SLC_CTRL 0x903
arc: add support for SLC (System Level Cache, AKA L2-cache) ARCv2 cores may have built-in SLC (System Level Cache, AKA L2-cache). This change adds functions required for controlling SLC: * slc_enable/disable * slc_flush/invalidate For now we just disable SLC to escape DMA coherency issues until either: * SLC flush/invalidate is supported in DMA APIin U-Boot * hardware DMA coherency is implemented (that might be board specific so probably we'll need to have a separate Kconfig option for controlling SLC explicitly) Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-03-30 10:36:04 +00:00
#define ARC_AUX_SLC_FLUSH 0x904
#define ARC_AUX_SLC_INVALIDATE 0x905
arc: significant cache rework [1] Align cache management functions to those in Linux kernel. I.e.: a) Use the same functions for all cache ops (D$ Inv/Flush) b) Split cache ops in 3 sub-functions: "before", "lineloop" and "after". That way we may re-use "before" and "after" functions for region and full cache ops. [2] Implement full-functional L2 (SLC) management. Before SLC was simply disabled early on boot. It's also possible to enable or disable L2 cache from config utility. [3] Disable/enable corresponding caches early on boot. So if U-Boot is configured to use caches they will be used at all times (this is useful in partucular for speed-up of relocation). Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-05-18 13:56:26 +00:00
#define ARC_AUX_SLC_IVDL 0x910
#define ARC_AUX_SLC_FLDL 0x912
arc: cache - utilize IO coherency (AKA IOC) engine With release of ARC HS38 v2.1 new IO coherency engine could be built-in ARC core. This hardware module ensures coherency between DMA-ed data from peripherals and L2 cache. With L2 and IOC enabled there's no overhead for L2 cache manual maintenance which results in significantly improved IO bandwidth. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2015-12-14 14:15:13 +00:00
#define ARC_BCR_CLUSTER 0xcf
/* IO coherency related auxiliary registers */
#define ARC_AUX_IO_COH_ENABLE 0x500
#define ARC_AUX_IO_COH_PARTIAL 0x501
#define ARC_AUX_IO_COH_AP0_BASE 0x508
#define ARC_AUX_IO_COH_AP0_SIZE 0x509
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
#ifndef __ASSEMBLY__
/* Accessors for auxiliary registers */
#define read_aux_reg(reg) __builtin_arc_lr(reg)
/* gcc builtin sr needs reg param to be long immediate */
#define write_aux_reg(reg_immed, val) \
__builtin_arc_sr((unsigned int)val, reg_immed)
ARC: add macro to get CPU id ARCNUM [15:8] field in ARC_AUX_IDENTITY register allows us to uniquely identify each core in a multi-core system. I.e. with help of this macro each core may get its index in SMP system. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2017-11-28 13:48:40 +00:00
/* ARCNUM [15:8] - field to identify each core in a multi-core system */
#define CPU_ID_GET() ((read_aux_reg(ARC_AUX_IDENTITY) & 0xFF00) >> 8)
arc: add architecture header files These are header files used by ARC700 architecture. Also note that "arch-arc700/hardware.h" is only required for compilation of "designware_i2c" driver which refers to "asm/arch/hardware.h". It would be good to fix mentioned driver sometime soon but it will cause changes in ARM board configs that use "designware_i2c". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Francois Bedard <fbedard@synopsys.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-02-04 08:56:13 +00:00
#endif /* __ASSEMBLY__ */
#endif /* _ASM_ARC_ARCREGS_H */
Reference in a new issue Copy permalink