Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-29 22:43:10 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/meson-g12b-bananapi-cm4.dtsi

389 lines
7.2 KiB
Text
Raw Normal View History

ARM: dts: import initial DT for BPI-CM4 module with BPI-CM4IO baseboard Import initial support for BPI-CM4 module with BPI-CM4IO baseboard from the Linux submission applied at [1]. The BananaPi BPI-CM4 module follows the CM4 specifications at [2], but with a single HDMI port and a single DSI output. The current CM4IO baseboard DT should work fine on the Raspberry CM4 baseboard and other derivatives baseboards, but proper DT should be written for other baseboards. [1] https://git.kernel.org/amlogic/c/0262f2736978b1763363224698f47112a148dab0 [2] https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf Link: https://lore.kernel.org/r/20230307-u-boot-cm4-v1-1-43f5a393cd37@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-03-07 08:20:24 +00:00
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
*/
#include "meson-g12b-a311d.dtsi"
#include <dt-bindings/gpio/meson-g12a-gpio.h>
/ {
aliases {
serial0 = &uart_AO;
rtc1 = &vrtc;
};
chosen {
stdout-path = "serial0:115200n8";
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
emmc_1v8: regulator-emmc-1v8 {
compatible = "regulator-fixed";
regulator-name = "EMMC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
dc_in: regulator-dc-in {
compatible = "regulator-fixed";
regulator-name = "DC_IN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
vddio_c: regulator-vddio-c {
compatible = "regulator-gpio";
regulator-name = "VDDIO_C";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
enable-active-high;
regulator-always-on;
gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>;
gpios-states = <1>;
states = <1800000 0>,
<3300000 1>;
};
vddao_1v8: regulator-vddao-1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
vddao_3v3: regulator-vddao-3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_in>;
regulator-always-on;
};
vddcpu_a: regulator-vddcpu-a {
/*
* MP8756GD DC/DC Regulator.
*/
compatible = "pwm-regulator";
regulator-name = "VDDCPU_A";
regulator-min-microvolt = <680000>;
regulator-max-microvolt = <1040000>;
pwm-supply = <&dc_in>;
pwms = <&pwm_ab 0 1250 0>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
regulator-always-on;
};
vddcpu_b: regulator-vddcpu-b {
/*
* SY8120B1ABC DC/DC Regulator.
*/
compatible = "pwm-regulator";
regulator-name = "VDDCPU_B";
regulator-min-microvolt = <680000>;
regulator-max-microvolt = <1040000>;
pwm-supply = <&dc_in>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
regulator-always-on;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
};
&arb {
status = "okay";
};
&clkc_audio {
status = "okay";
};
&cec_AO {
pinctrl-0 = <&cec_ao_a_h_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cecb_AO {
pinctrl-0 = <&cec_ao_b_h_pins>;
pinctrl-names = "default";
hdmi-phandle = <&hdmi_tx>;
};
&cpu0 {
cpu-supply = <&vddcpu_b>;
operating-points-v2 = <&cpu_opp_table_0>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu1 {
cpu-supply = <&vddcpu_b>;
operating-points-v2 = <&cpu_opp_table_0>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu100 {
cpu-supply = <&vddcpu_a>;
operating-points-v2 = <&cpub_opp_table_1>;
clocks = <&clkc CLKID_CPUB_CLK>;
clock-latency = <50000>;
};
&cpu101 {
cpu-supply = <&vddcpu_a>;
operating-points-v2 = <&cpub_opp_table_1>;
clocks = <&clkc CLKID_CPUB_CLK>;
clock-latency = <50000>;
};
&cpu102 {
cpu-supply = <&vddcpu_a>;
operating-points-v2 = <&cpub_opp_table_1>;
clocks = <&clkc CLKID_CPUB_CLK>;
clock-latency = <50000>;
};
&cpu103 {
cpu-supply = <&vddcpu_a>;
operating-points-v2 = <&cpub_opp_table_1>;
clocks = <&clkc CLKID_CPUB_CLK>;
clock-latency = <50000>;
};
&ext_mdio {
external_phy: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
};
};
/* Ethernet to be enabled in baseboard DT */
&ethmac {
pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
pinctrl-names = "default";
phy-mode = "rgmii-txid";
phy-handle = <&external_phy>;
};
&frddr_a {
status = "okay";
};
&frddr_b {
status = "okay";
};
&frddr_c {
status = "okay";
};
/* HDMI to be enabled in baseboard DT */
&hdmi_tx {
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
pinctrl-names = "default";
hdmi-supply = <&dc_in>;
};
/* "Camera" I2C bus */
&i2c1 {
pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
pinctrl-names = "default";
};
/* Main I2C bus */
&i2c2 {
pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
pinctrl-names = "default";
};
/* "ID" I2C bus */
&i2c3 {
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
pinctrl-names = "default";
};
&pcie {
reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
};
&pwm_ab {
pinctrl-0 = <&pwm_a_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin0";
status = "okay";
};
&pwm_ef {
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm_AO_cd {
pinctrl-0 = <&pwm_ao_d_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin1";
status = "okay";
};
&saradc {
vref-supply = <&vddao_1v8>;
status = "okay";
};
/* on-module SDIO WiFi */
&sd_emmc_a {
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
sd-uhs-sdr104;
max-frequency = <50000000>;
non-removable;
disable-wp;
/* WiFi firmware requires power in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddao_3v3>;
status = "okay";
rtl8822cs: wifi@1 {
reg = <1>;
};
};
/* SD card to be enabled in baseboard DT */
&sd_emmc_b {
pinctrl-0 = <&sdcard_c_pins>;
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_c>;
};
/* on-module eMMC */
&sd_emmc_c {
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
max-frequency = <200000000>;
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddao_1v8>;
status = "okay";
};
&tdmif_b {
status = "okay";
};
&tdmout_b {
status = "okay";
};
/* on-module UART BT */
&uart_A {
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "realtek,rtl8822cs-bt";
enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};
};
&uart_AO {
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb {
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
};
Reference in a new issue Copy permalink