u-boot/include/configs/twister.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2011
 * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
 *
 * Copyright (C) 2009 TechNexion Ltd.
 *
 * Configuration for the Technexion twister board.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "tam3517-common.h"

#define CONFIG_MACH_TYPE	MACH_TYPE_TAM3517

#define CONFIG_TAM3517_SW3_SETTINGS
#define CONFIG_XR16L2751


#define CONFIG_BOOTFILE		"uImage"

#define CONFIG_HOSTNAME "twister"

#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
	"bootcmd=run nandboot\0"

/* SPL OS boot options */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000

#define CONFIG_SYS_SPL_ARGS_ADDR	(PHYS_SDRAM_1 + 0x100)

#endif /* __CONFIG_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
ARM: omap3: add support to Technexion twister board The twister board is a development board using the TAM3517 SOM. Support for NAND, 2 Ethernet (EMAC and SMC911), USB (EHCI_OMAP). Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tapani Utrianen <tapani@technexion.com> CC: Tom Rini <tom.rini@gmail.com> CC: Sandeep Paulraj <s-paulraj@ti.com> 2011-11-30 23:56:53 +00:00			`/*`
			`* Copyright (C) 2011`
			`* Stefano Babic, DENX Software Engineering, sbabic@denx.de.`
			`*`
			`* Copyright (C) 2009 TechNexion Ltd.`
			`*`
			`* Configuration for the Technexion twister board.`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`#include "tam3517-common.h"`

			`#define CONFIG_MACH_TYPE MACH_TYPE_TAM3517`

			`#define CONFIG_TAM3517_SW3_SETTINGS`
			`#define CONFIG_XR16L2751`


			`#define CONFIG_BOOTFILE "uImage"`

treewide: Convert CONFIG_HOSTNAME to a string option CONFIG_HOSTNAME is defined as a "plain" preprocessor string, but every use is couched by __stringify(...). Hence, convert it to a proper string option. Signed-off-by: Mario Six <mario.six@gdsys.cc> 2018-03-28 12:38:20 +00:00			`#define CONFIG_HOSTNAME "twister"`
ARM: omap3: add support to Technexion twister board The twister board is a development board using the TAM3517 SOM. Support for NAND, 2 Ethernet (EMAC and SMC911), USB (EHCI_OMAP). Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tapani Utrianen <tapani@technexion.com> CC: Tom Rini <tom.rini@gmail.com> CC: Sandeep Paulraj <s-paulraj@ti.com> 2011-11-30 23:56:53 +00:00
			`#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \`
			`"bootcmd=run nandboot\0"`

OMAP3: twister: add support to boot Linux from SPL Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tom Rini <tom.rini@gmail.com> CC: Wolfgang Denk <wd@denx.de> CC: Simon Schwarz <simonschwarzcor@gmail.com> 2012-03-15 04:01:44 +00:00			`/* SPL OS boot options */`
			`#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000`

			`#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100)`

ARM: omap3: add support to Technexion twister board The twister board is a development board using the TAM3517 SOM. Support for NAND, 2 Ethernet (EMAC and SMC911), USB (EHCI_OMAP). Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tapani Utrianen <tapani@technexion.com> CC: Tom Rini <tom.rini@gmail.com> CC: Sandeep Paulraj <s-paulraj@ti.com> 2011-11-30 23:56:53 +00:00			`#endif /* __CONFIG_H */`