u-boot/include/configs/salvator-x.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * include/configs/salvator-x.h
 *     This file is Salvator-X board configuration.
 *
 * Copyright (C) 2015 Renesas Electronics Corporation
 */

#ifndef __SALVATOR_X_H
#define __SALVATOR_X_H

#include "rcar-gen3-common.h"

/* Ethernet RAVB */
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI

/* Generic Timer Definitions (use in assembler source) */
#define COUNTER_FREQUENCY	0xFE502A	/* 16.66MHz from CPclk */

/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
#define CONFIG_SYS_MMC_ENV_DEV		1
#define CONFIG_SYS_MMC_ENV_PART		2

#endif /* __SALVATOR_X_H */
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-06 21:58:06 +00:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
ARM: rmobile: Add support salvator-x board Salvator-x is an entry level development board based on R-Car H3 SoC (R8A7795). This commit supports SCIF only. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2016-03-31 18:51:36 +00:00			`/*`
			`* include/configs/salvator-x.h`
			`* This file is Salvator-X board configuration.`
			`*`
			`* Copyright (C) 2015 Renesas Electronics Corporation`
			`*/`

			`#ifndef __SALVATOR_X_H`
			`#define __SALVATOR_X_H`

			`#include "rcar-gen3-common.h"`

ARM: rmobile: salvator-x: Add RAVB ethernet support Add support for the AVB ethernet on the Salvator-X board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2017-05-13 13:57:47 +00:00			`/* Ethernet RAVB */`
			`#define CONFIG_BITBANGMII`
			`#define CONFIG_BITBANGMII_MULTI`

ARM: rmobile: Add support salvator-x board Salvator-x is an entry level development board based on R-Car H3 SoC (R8A7795). This commit supports SCIF only. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2016-03-31 18:51:36 +00:00			`/* Generic Timer Definitions (use in assembler source) */`
			`#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */`

ARM: rmobile: salvator-x: Add SD support Add support for the SD card slots on the Salvator-X board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2017-05-13 13:57:46 +00:00			`/* Environment in eMMC, at the end of 2nd "boot sector" */`
			`#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)`
			`#define CONFIG_SYS_MMC_ENV_DEV 1`
			`#define CONFIG_SYS_MMC_ENV_PART 2`

ARM: rmobile: Add support salvator-x board Salvator-x is an entry level development board based on R-Car H3 SoC (R8A7795). This commit supports SCIF only. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> 2016-03-31 18:51:36 +00:00			`#endif /* __SALVATOR_X_H */`