u-boot/test/dm/scmi.c

258 lines
7.3 KiB
C
Raw Normal View History

firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020, Linaro Limited
*
* Tests scmi_agent uclass and the SCMI drivers implemented in other
* uclass devices probe when a SCMI server exposes resources.
*
* Note in test.dts the protocol@10 node in scmi node. Protocol 0x10 is not
* implemented in U-Boot SCMI components but the implementation is expected
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
* to not complain on unknown protocol IDs, as long as it is not used. Note
* in test.dts tests that SCMI drivers probing does not fail for such an
* unknown SCMI protocol ID.
*/
#include <common.h>
#include <clk.h>
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
#include <dm.h>
#include <reset.h>
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
#include <asm/scmi_test.h>
#include <dm/device-internal.h>
#include <dm/test.h>
#include <linux/kconfig.h>
#include <power/regulator.h>
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
#include <test/ut.h>
static int ut_assert_scmi_state_preprobe(struct unit_test_state *uts)
{
struct sandbox_scmi_service *scmi_ctx = sandbox_scmi_service_ctx();
ut_assertnonnull(scmi_ctx);
ut_assertnull(scmi_ctx->agent);
return 0;
}
static int ut_assert_scmi_state_postprobe(struct unit_test_state *uts,
struct udevice *dev)
{
struct sandbox_scmi_devices *scmi_devices;
struct sandbox_scmi_service *scmi_ctx;
struct sandbox_scmi_agent *agent;
/* Device references to check context against test sequence */
scmi_devices = sandbox_scmi_devices_ctx(dev);
ut_assertnonnull(scmi_devices);
ut_asserteq(2, scmi_devices->clk_count);
ut_asserteq(1, scmi_devices->reset_count);
ut_asserteq(2, scmi_devices->regul_count);
/* State of the simulated SCMI server exposed */
scmi_ctx = sandbox_scmi_service_ctx();
ut_assertnonnull(scmi_ctx);
agent = scmi_ctx->agent;
ut_assertnonnull(agent);
ut_asserteq(3, agent->clk_count);
ut_assertnonnull(agent->clk);
ut_asserteq(1, agent->reset_count);
ut_assertnonnull(agent->reset);
ut_asserteq(2, agent->voltd_count);
ut_assertnonnull(agent->voltd);
return 0;
}
static int load_sandbox_scmi_test_devices(struct unit_test_state *uts,
struct udevice **dev)
{
int ret;
ret = ut_assert_scmi_state_preprobe(uts);
if (ret)
return ret;
ut_assertok(uclass_get_device_by_name(UCLASS_MISC, "sandbox_scmi",
dev));
ut_assertnonnull(*dev);
return ut_assert_scmi_state_postprobe(uts, *dev);
}
static int release_sandbox_scmi_test_devices(struct unit_test_state *uts,
struct udevice *dev)
{
ut_assertok(device_remove(dev, DM_REMOVE_NORMAL));
/* Not sure test devices are fully removed, agent may not be visible */
return 0;
}
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
/*
* Test SCMI states when loading and releasing resources
* related to SCMI drivers.
*/
static int dm_test_scmi_sandbox_agent(struct unit_test_state *uts)
{
struct udevice *dev = NULL;
int ret;
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
ret = load_sandbox_scmi_test_devices(uts, &dev);
if (!ret)
ret = release_sandbox_scmi_test_devices(uts, dev);
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
return ret;
firmware: add SCMI agent uclass This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-09 16:44:00 +00:00
}
DM_TEST(dm_test_scmi_sandbox_agent, UT_TESTF_SCAN_FDT);
static int dm_test_scmi_clocks(struct unit_test_state *uts)
{
struct sandbox_scmi_devices *scmi_devices;
struct sandbox_scmi_service *scmi_ctx;
struct sandbox_scmi_agent *agent;
struct udevice *dev;
int ret_dev;
int ret;
ret = load_sandbox_scmi_test_devices(uts, &dev);
if (ret)
return ret;
scmi_devices = sandbox_scmi_devices_ctx(dev);
ut_assertnonnull(scmi_devices);
scmi_ctx = sandbox_scmi_service_ctx();
ut_assertnonnull(scmi_ctx);
agent = scmi_ctx->agent;
ut_assertnonnull(agent);
/* Test SCMI clocks rate manipulation */
ut_asserteq(333, agent->clk[0].rate);
ut_asserteq(200, agent->clk[1].rate);
ut_asserteq(1000, agent->clk[2].rate);
ut_asserteq(1000, clk_get_rate(&scmi_devices->clk[0]));
ut_asserteq(333, clk_get_rate(&scmi_devices->clk[1]));
ret_dev = clk_set_rate(&scmi_devices->clk[1], 1088);
ut_assert(!ret_dev || ret_dev == 1088);
ut_asserteq(1088, agent->clk[0].rate);
ut_asserteq(200, agent->clk[1].rate);
ut_asserteq(1000, agent->clk[2].rate);
ut_asserteq(1000, clk_get_rate(&scmi_devices->clk[0]));
ut_asserteq(1088, clk_get_rate(&scmi_devices->clk[1]));
/* restore original rate for further tests */
ret_dev = clk_set_rate(&scmi_devices->clk[1], 333);
ut_assert(!ret_dev || ret_dev == 333);
/* Test SCMI clocks gating manipulation */
ut_assert(!agent->clk[0].enabled);
ut_assert(!agent->clk[1].enabled);
ut_assert(!agent->clk[2].enabled);
ut_asserteq(0, clk_enable(&scmi_devices->clk[1]));
ut_assert(agent->clk[0].enabled);
ut_assert(!agent->clk[1].enabled);
ut_assert(!agent->clk[2].enabled);
ut_assertok(clk_disable(&scmi_devices->clk[1]));
ut_assert(!agent->clk[0].enabled);
ut_assert(!agent->clk[1].enabled);
ut_assert(!agent->clk[2].enabled);
return release_sandbox_scmi_test_devices(uts, dev);
}
DM_TEST(dm_test_scmi_clocks, UT_TESTF_SCAN_FDT);
static int dm_test_scmi_resets(struct unit_test_state *uts)
{
struct sandbox_scmi_devices *scmi_devices;
struct sandbox_scmi_service *scmi_ctx;
struct sandbox_scmi_agent *agent;
struct udevice *dev = NULL;
int ret;
ret = load_sandbox_scmi_test_devices(uts, &dev);
if (ret)
return ret;
scmi_devices = sandbox_scmi_devices_ctx(dev);
ut_assertnonnull(scmi_devices);
scmi_ctx = sandbox_scmi_service_ctx();
ut_assertnonnull(scmi_ctx);
agent = scmi_ctx->agent;
ut_assertnonnull(agent);
/* Test SCMI resect controller manipulation */
ut_assert(!agent->reset[0].asserted)
ut_assertok(reset_assert(&scmi_devices->reset[0]));
ut_assert(agent->reset[0].asserted)
ut_assertok(reset_deassert(&scmi_devices->reset[0]));
ut_assert(!agent->reset[0].asserted);
return release_sandbox_scmi_test_devices(uts, dev);
}
DM_TEST(dm_test_scmi_resets, UT_TESTF_SCAN_FDT);
static int dm_test_scmi_voltage_domains(struct unit_test_state *uts)
{
struct sandbox_scmi_devices *scmi_devices;
struct sandbox_scmi_service *scmi_ctx;
struct sandbox_scmi_agent *agent;
struct dm_regulator_uclass_plat *uc_pdata;
struct udevice *dev;
struct udevice *regul0_dev;
ut_assertok(load_sandbox_scmi_test_devices(uts, &dev));
scmi_devices = sandbox_scmi_devices_ctx(dev);
ut_assertnonnull(scmi_devices);
scmi_ctx = sandbox_scmi_service_ctx();
ut_assertnonnull(scmi_ctx);
agent = scmi_ctx->agent;
ut_assertnonnull(agent);
/* Set/Get an SCMI voltage domain level */
regul0_dev = scmi_devices->regul[0];
ut_assert(regul0_dev);
uc_pdata = dev_get_uclass_plat(regul0_dev);
ut_assert(uc_pdata);
ut_assertok(regulator_set_value(regul0_dev, uc_pdata->min_uV));
ut_asserteq(agent->voltd[0].voltage_uv, uc_pdata->min_uV);
ut_assert(regulator_get_value(regul0_dev) == uc_pdata->min_uV);
ut_assertok(regulator_set_value(regul0_dev, uc_pdata->max_uV));
ut_asserteq(agent->voltd[0].voltage_uv, uc_pdata->max_uV);
ut_assert(regulator_get_value(regul0_dev) == uc_pdata->max_uV);
/* Enable/disable SCMI voltage domains */
ut_assertok(regulator_set_enable(scmi_devices->regul[0], false));
ut_assertok(regulator_set_enable(scmi_devices->regul[1], false));
ut_assert(!agent->voltd[0].enabled);
ut_assert(!agent->voltd[1].enabled);
ut_assertok(regulator_set_enable(scmi_devices->regul[0], true));
ut_assert(agent->voltd[0].enabled);
ut_assert(!agent->voltd[1].enabled);
ut_assertok(regulator_set_enable(scmi_devices->regul[1], true));
ut_assert(agent->voltd[0].enabled);
ut_assert(agent->voltd[1].enabled);
ut_assertok(regulator_set_enable(scmi_devices->regul[0], false));
ut_assert(!agent->voltd[0].enabled);
ut_assert(agent->voltd[1].enabled);
return release_sandbox_scmi_test_devices(uts, dev);
}
DM_TEST(dm_test_scmi_voltage_domains, UT_TESTF_SCAN_FDT);