u-boot/configs/roc-pc-rk3399_defconfig

83 lines
2.1 KiB
Text
Raw Normal View History

CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x8000
CONFIG_ENV_OFFSET=0x3F8000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_ROCKCHIP_RK3399=y
CONFIG_TARGET_ROC_PC_RK3399=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc"
CONFIG_DEBUG_UART=y
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x20000
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_TPL=y
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
roc-rk3399-pc: Enable USB3.0 Host Enable USB3.0 Host support for ROC-RK3399-PC boards. Tested USB3.0 SSD on Type C1 port on board. => usb start starting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Hub (480 Mb/s, 0mA) | | VIA Labs, Inc. USB2.0 Hub | | | +-4 Hub (480 Mb/s, 100mA) | | USB 2.0 Hub | | | +-5 (480 Mb/s, 100mA) | VIA Technologies Inc. USB 2.0 BILLBOARD 0000000000000001 | +-3 Hub (5 Gb/s, 0mA) | VIA Labs, Inc. USB3.0 Hub | +-6 Mass Storage (5 Gb/s, 224mA) JMicron External Disk 3.0 DB12345678A2 => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-26 03:35:16 +00:00
CONFIG_MISC=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
roc-rk3399-pc: Enable USB3.0 Host Enable USB3.0 Host support for ROC-RK3399-PC boards. Tested USB3.0 SSD on Type C1 port on board. => usb start starting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Hub (480 Mb/s, 0mA) | | VIA Labs, Inc. USB2.0 Hub | | | +-4 Hub (480 Mb/s, 100mA) | | USB 2.0 Hub | | | +-5 (480 Mb/s, 100mA) | VIA Technologies Inc. USB 2.0 BILLBOARD 0000000000000001 | +-3 Hub (5 Gb/s, 0mA) | VIA Labs, Inc. USB3.0 Hub | +-6 Mass Storage (5 Gb/s, 224mA) JMicron External Disk 3.0 DB12345678A2 => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-26 03:35:16 +00:00
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_TYPEC=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
# CONFIG_RAM_ROCKCHIP_DEBUG is not set
CONFIG_RAM_RK3399_LPDDR4=y
roc-rk3399-pc: Enable USB3.0 Host Enable USB3.0 Host support for ROC-RK3399-PC boards. Tested USB3.0 SSD on Type C1 port on board. => usb start starting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Hub (480 Mb/s, 0mA) | | VIA Labs, Inc. USB2.0 Hub | | | +-4 Hub (480 Mb/s, 100mA) | | USB 2.0 Hub | | | +-5 (480 Mb/s, 100mA) | VIA Technologies Inc. USB 2.0 BILLBOARD 0000000000000001 | +-3 Hub (5 Gb/s, 0mA) | VIA Labs, Inc. USB3.0 Hub | +-6 Mass Storage (5 Gb/s, 224mA) JMicron External Disk 3.0 DB12345678A2 => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-26 03:35:16 +00:00
CONFIG_DM_RESET=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_ROCKCHIP_SPI=y
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
roc-rk3399-pc: Enable USB3.0 Host Enable USB3.0 Host support for ROC-RK3399-PC boards. Tested USB3.0 SSD on Type C1 port on board. => usb start starting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found => usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) | U-Boot XHCI Host Controller | +-2 Hub (480 Mb/s, 0mA) | | VIA Labs, Inc. USB2.0 Hub | | | +-4 Hub (480 Mb/s, 100mA) | | USB 2.0 Hub | | | +-5 (480 Mb/s, 100mA) | VIA Technologies Inc. USB 2.0 BILLBOARD 0000000000000001 | +-3 Hub (5 Gb/s, 0mA) | VIA Labs, Inc. USB3.0 Hub | +-6 Mass Storage (5 Gb/s, 224mA) JMicron External Disk 3.0 DB12345678A2 => usb reset resetting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 2 USB Device(s) found scanning bus dwc3 for devices... 6 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-26 03:35:16 +00:00
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_ROCKCHIP_USB2_PHY=y
CONFIG_USB_KEYBOARD=y
CONFIG_USB_GADGET=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_RTL8152=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_ROCKCHIP=y
CONFIG_DISPLAY_ROCKCHIP_HDMI=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y