Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-11 15:37:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/spi/spi-uclass.c

486 lines
11 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0+
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
/*
* Copyright (c) 2014 Google, Inc
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <malloc.h>
#include <spi.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
#include <dm/lists.h>
#include <dm/util.h>
DECLARE_GLOBAL_DATA_PTR;
dm: spi: prevent setting a speed of 0 Hz When the device tree is missing a correct spi slave description below the bus (compatible "spi-flash" or spi-max-frequency are missing), the 'set_speed' callback can be called with 'speed' == 0 Hz. At least with cadence qspi, this leads to a division by zero. Prevent this by initializing speed to 100 kHz in this case (same fallback value as is done in 'dm_spi_claim_bus') and issue a warning to console. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-30 20:09:48 +00:00
#define SPI_DEFAULT_SPEED_HZ 100000
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
static int spi_set_speed_mode(struct udevice *bus, int speed, int mode)
{
struct dm_spi_ops *ops;
int ret;
ops = spi_get_ops(bus);
if (ops->set_speed)
ret = ops->set_speed(bus, speed);
else
ret = -EINVAL;
if (ret) {
printf("Cannot set speed (err=%d)\n", ret);
return ret;
}
if (ops->set_mode)
ret = ops->set_mode(bus, mode);
else
ret = -EINVAL;
if (ret) {
printf("Cannot set mode (err=%d)\n", ret);
return ret;
}
return 0;
}
dm: spi: introduce dm api Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer Convert spi_claim_bus, spi_release_bus and spi_xfer to use the new API. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-05-03 02:02:22 +00:00
int dm_spi_claim_bus(struct udevice *dev)
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
{
struct udevice *bus = dev->parent;
struct dm_spi_ops *ops = spi_get_ops(bus);
dm: core: Add dev_get_uclass_priv() to access uclass private data Add a convenience function to access the private data that a uclass stores for each of its devices. Convert over most existing uses for consistency and to provide an example for others. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-05 19:25:20 +00:00
struct dm_spi_bus *spi = dev_get_uclass_priv(bus);
dm: spi: introduce dm api Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer Convert spi_claim_bus, spi_release_bus and spi_xfer to use the new API. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-05-03 02:02:22 +00:00
struct spi_slave *slave = dev_get_parent_priv(dev);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
int speed;
speed = slave->max_hz;
if (spi->max_hz) {
if (speed)
linux/kernel.h: sync min, max, min3, max3 macros with Linux U-Boot has never cared about the type when we get max/min of two values, but Linux Kernel does. This commit gets min, max, min3, max3 macros synced with the kernel introducing type checks. Many of references of those macros must be fixed to suppress warnings. We have two options: - Use min, max, min3, max3 only when the arguments have the same type (or add casts to the arguments) - Use min_t/max_t instead with the appropriate type for the first argument Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> [trini: Fixup arch/blackfin/lib/string.c] Signed-off-by: Tom Rini <trini@ti.com>
2014-11-06 18:03:31 +00:00
speed = min(speed, (int)spi->max_hz);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
else
speed = spi->max_hz;
}
if (!speed)
dm: spi: prevent setting a speed of 0 Hz When the device tree is missing a correct spi slave description below the bus (compatible "spi-flash" or spi-max-frequency are missing), the 'set_speed' callback can be called with 'speed' == 0 Hz. At least with cadence qspi, this leads to a division by zero. Prevent this by initializing speed to 100 kHz in this case (same fallback value as is done in 'dm_spi_claim_bus') and issue a warning to console. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-30 20:09:48 +00:00
speed = SPI_DEFAULT_SPEED_HZ;
dm: spi: Avoid setting the speed with every transfer Only set the speed if it has changed from last time. Since the speed will be 0 when the device is probed it will always be changed on the first transfer after the device is probed. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-17 22:29:35 +00:00
if (speed != slave->speed) {
spi: spi-uclass: Fix style violations Remove a superfluous newline, and reduce the scope of a variable. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-01-15 10:08:41 +00:00
int ret = spi_set_speed_mode(bus, speed, slave->mode);
dm: spi: Avoid setting the speed with every transfer Only set the speed if it has changed from last time. Since the speed will be 0 when the device is probed it will always be changed on the first transfer after the device is probed. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-17 22:29:35 +00:00
if (ret)
dm: spi: Add logging of some return values When SPI flash operations fail it is helpful to be able to see the error codes and where they are generated. Add logging to capture this information for read operations. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:24 +00:00
return log_ret(ret);
dm: spi: Avoid setting the speed with every transfer Only set the speed if it has changed from last time. Since the speed will be 0 when the device is probed it will always be changed on the first transfer after the device is probed. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-17 22:29:35 +00:00
slave->speed = speed;
}
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
dm: spi: Add logging of some return values When SPI flash operations fail it is helpful to be able to see the error codes and where they are generated. Add logging to capture this information for read operations. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:24 +00:00
return log_ret(ops->claim_bus ? ops->claim_bus(dev) : 0);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
}
dm: spi: introduce dm api Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer Convert spi_claim_bus, spi_release_bus and spi_xfer to use the new API. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-05-03 02:02:22 +00:00
void dm_spi_release_bus(struct udevice *dev)
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
{
struct udevice *bus = dev->parent;
struct dm_spi_ops *ops = spi_get_ops(bus);
if (ops->release_bus)
dm: spi: Correct SPI claim/release_bus() methods These methods should be passed a slave device, not a bus. This matches the old SPI interface. It is important to know which device is claiming the bus so passing a bus is not that useful. Reported-by: Haikun Wang <haikun.wang@freescale.com> Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2015-04-19 15:05:40 +00:00
ops->release_bus(dev);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
}
dm: spi: introduce dm api Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer Convert spi_claim_bus, spi_release_bus and spi_xfer to use the new API. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-05-03 02:02:22 +00:00
int dm_spi_xfer(struct udevice *dev, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
{
struct udevice *bus = dev->parent;
if (bus->uclass->uc_drv->id != UCLASS_SPI)
return -EOPNOTSUPP;
return spi_get_ops(bus)->xfer(dev, bitlen, dout, din, flags);
dm: spi: introduce dm api Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer Convert spi_claim_bus, spi_release_bus and spi_xfer to use the new API. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-05-03 02:02:22 +00:00
}
int spi_claim_bus(struct spi_slave *slave)
{
dm: spi: Add logging of some return values When SPI flash operations fail it is helpful to be able to see the error codes and where they are generated. Add logging to capture this information for read operations. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:24 +00:00
return log_ret(dm_spi_claim_bus(slave->dev));
dm: spi: introduce dm api Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer Convert spi_claim_bus, spi_release_bus and spi_xfer to use the new API. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-05-03 02:02:22 +00:00
}
void spi_release_bus(struct spi_slave *slave)
{
dm_spi_release_bus(slave->dev);
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
return dm_spi_xfer(slave->dev, bitlen, dout, din, flags);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
}
spi: Add spi_write_then_read Add support for SPI synchronous write followed by read, this is common interface call from spi-nor to spi drivers. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-07-22 11:52:56 +00:00
int spi_write_then_read(struct spi_slave *slave, const u8 *opcode,
size_t n_opcode, const u8 *txbuf, u8 *rxbuf,
size_t n_buf)
{
unsigned long flags = SPI_XFER_BEGIN;
int ret;
if (n_buf == 0)
flags |= SPI_XFER_END;
ret = spi_xfer(slave, n_opcode * 8, opcode, NULL, flags);
if (ret) {
debug("spi: failed to send command (%zu bytes): %d\n",
n_opcode, ret);
} else if (n_buf != 0) {
ret = spi_xfer(slave, n_buf * 8, txbuf, rxbuf, SPI_XFER_END);
if (ret)
debug("spi: failed to transfer %zu bytes of data: %d\n",
n_buf, ret);
}
return ret;
}
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
dm: spi: Make local functions static Several functions in this file should be marked as static. Update them. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:39:05 +00:00
static int spi_child_post_bind(struct udevice *dev)
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
{
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
if (!dev_of_valid(dev))
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
return 0;
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
return spi_slave_ofdata_to_platdata(dev, plat);
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
}
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
#endif
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
dm: spi: Make local functions static Several functions in this file should be marked as static. Update them. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:39:05 +00:00
static int spi_post_probe(struct udevice *bus)
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
{
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
dm: core: Add dev_get_uclass_priv() to access uclass private data Add a convenience function to access the private data that a uclass stores for each of its devices. Convert over most existing uses for consistency and to provide an example for others. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-03-05 19:25:20 +00:00
struct dm_spi_bus *spi = dev_get_uclass_priv(bus);
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
spi->max_hz = dev_read_u32_default(bus, "spi-max-frequency", 0);
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
#endif
dm: spi: Add support for all targets which requires MANUAL_RELOC It is follow up patch based on "dm: Add support for all targets which requires MANUAL_RELOC" (sha1: 484fdf5ba058b07be5ca82763aa2b72063540ef3) to update function pointers for DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-27 12:36:42 +00:00
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
struct dm_spi_ops *ops = spi_get_ops(bus);
if (ops->claim_bus)
ops->claim_bus += gd->reloc_off;
if (ops->release_bus)
ops->release_bus += gd->reloc_off;
if (ops->set_wordlen)
ops->set_wordlen += gd->reloc_off;
if (ops->xfer)
ops->xfer += gd->reloc_off;
if (ops->set_speed)
ops->set_speed += gd->reloc_off;
if (ops->set_mode)
ops->set_mode += gd->reloc_off;
if (ops->cs_info)
ops->cs_info += gd->reloc_off;
#endif
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
return 0;
}
dm: spi: Make local functions static Several functions in this file should be marked as static. Update them. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:39:05 +00:00
static int spi_child_pre_probe(struct udevice *dev)
dm: spi: Set up the spi_slave device pointer in child_pre_probe() At present we use struct spi_slave as our device pointer in a lot of places to avoid changing the old SPI API. At some point this will go away. But for now, it is better if the SPI uclass sets up this pointer, rather than relying on passing it into the device when it is probed. We can use the new uclass child_pre_probe() method to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:11 +00:00
{
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
dm: Rename dev_get_parentdata() to dev_get_parent_priv() The current name is inconsistent with other driver model data access functions. Rename it and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-29 05:32:01 +00:00
struct spi_slave *slave = dev_get_parent_priv(dev);
dm: spi: Set up the spi_slave device pointer in child_pre_probe() At present we use struct spi_slave as our device pointer in a lot of places to avoid changing the old SPI API. At some point this will go away. But for now, it is better if the SPI uclass sets up this pointer, rather than relying on passing it into the device when it is probed. We can use the new uclass child_pre_probe() method to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:11 +00:00
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
/*
* This is needed because we pass struct spi_slave around the place
* instead slave->dev (a struct udevice). So we have to have some
* way to access the slave udevice given struct spi_slave. Once we
* change the SPI API to use udevice instead of spi_slave, we can
* drop this.
*/
dm: spi: Set up the spi_slave device pointer in child_pre_probe() At present we use struct spi_slave as our device pointer in a lot of places to avoid changing the old SPI API. At some point this will go away. But for now, it is better if the SPI uclass sets up this pointer, rather than relying on passing it into the device when it is probed. We can use the new uclass child_pre_probe() method to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:11 +00:00
slave->dev = dev;
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
slave->max_hz = plat->max_hz;
slave->mode = plat->mode;
spi: spi-uclass: Set slave wordlen with SPI_DEFAULT_WORDLEN In some case wordlen may not be set. Use SPI_DEFAULT_WORDLEN as default. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-01-17 10:56:48 +00:00
slave->wordlen = SPI_DEFAULT_WORDLEN;
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
dm: spi: Set up the spi_slave device pointer in child_pre_probe() At present we use struct spi_slave as our device pointer in a lot of places to avoid changing the old SPI API. At some point this will go away. But for now, it is better if the SPI uclass sets up this pointer, rather than relying on passing it into the device when it is probed. We can use the new uclass child_pre_probe() method to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:11 +00:00
return 0;
}
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
int spi_chip_select(struct udevice *dev)
{
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
struct dm_spi_slave_platdata *plat = dev_get_parent_platdata(dev);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
return plat ? plat->cs : -ENOENT;
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
}
dm: spi: Correct handling of SPI chip selects in sandbox This code was not updated when the chip select handling was adjusted. Fix it to call the correct function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Heiko Schocher <hs@denx.de>
2014-11-11 17:46:22 +00:00
int spi_find_chip_select(struct udevice *bus, int cs, struct udevice **devp)
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
{
struct udevice *dev;
for (device_find_first_child(bus, &dev); dev;
device_find_next_child(&dev)) {
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
struct dm_spi_slave_platdata *plat;
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
plat = dev_get_parent_platdata(dev);
debug("%s: plat=%p, cs=%d\n", __func__, plat, plat->cs);
if (plat->cs == cs) {
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
*devp = dev;
return 0;
}
}
return -ENODEV;
}
int spi_cs_is_valid(unsigned int busnum, unsigned int cs)
{
struct spi_cs_info info;
struct udevice *bus;
int ret;
ret = uclass_find_device_by_seq(UCLASS_SPI, busnum, false, &bus);
if (ret) {
debug("%s: No bus %d\n", __func__, busnum);
return ret;
}
return spi_cs_info(bus, cs, &info);
}
int spi_cs_info(struct udevice *bus, uint cs, struct spi_cs_info *info)
{
struct spi_cs_info local_info;
struct dm_spi_ops *ops;
int ret;
if (!info)
info = &local_info;
/* If there is a device attached, return it */
info->dev = NULL;
ret = spi_find_chip_select(bus, cs, &info->dev);
if (!ret)
return 0;
/*
* Otherwise ask the driver. For the moment we don't have CS info.
* When we do we could provide the driver with a helper function
* to figure out what chip selects are valid, or just handle the
* request.
*/
ops = spi_get_ops(bus);
if (ops->cs_info)
return ops->cs_info(bus, cs, info);
/*
dm: spi: Return 0 if driver does not implement ops->cs_info If an SPI controller driver does not implement ops->cs_info, that probably means any chip select number could be valid, hence let's return 0 for spi_cs_info(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # SoPine Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-09 13:00:00 +00:00
* We could assume there is at least one valid chip select.
* The driver didn't care enough to tell us.
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
*/
dm: spi: Return 0 if driver does not implement ops->cs_info If an SPI controller driver does not implement ops->cs_info, that probably means any chip select number could be valid, hence let's return 0 for spi_cs_info(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # SoPine Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-09-09 13:00:00 +00:00
return 0;
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
}
int spi_find_bus_and_cs(int busnum, int cs, struct udevice **busp,
struct udevice **devp)
{
struct udevice *bus, *dev;
int ret;
ret = uclass_find_device_by_seq(UCLASS_SPI, busnum, false, &bus);
if (ret) {
debug("%s: No bus %d\n", __func__, busnum);
return ret;
}
ret = spi_find_chip_select(bus, cs, &dev);
if (ret) {
debug("%s: No cs %d\n", __func__, cs);
return ret;
}
*busp = bus;
*devp = dev;
return ret;
}
int spi_get_bus_and_cs(int busnum, int cs, int speed, int mode,
const char *drv_name, const char *dev_name,
struct udevice **busp, struct spi_slave **devp)
{
struct udevice *bus, *dev;
dm: spi: Read default speed and mode values from DT In case of DT boot, don't read default speed and mode for SPI from CONFIG_*, instead read from DT node. This will make sure that boards with multiple SPI/QSPI controllers can be probed at different bus frequencies and SPI modes. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-06 04:34:28 +00:00
struct dm_spi_slave_platdata *plat;
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
bool created = false;
int ret;
dm: spi: Do not assume first SPI bus When CONFIG_OF_PRIOR_STAGE is enabled, this workaround was needed before device_bind_common assigned request numbers sequentially in the absence of aliases. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org>
2019-09-06 11:51:19 +00:00
#if CONFIG_IS_ENABLED(OF_PLATDATA)
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
ret = uclass_first_device_err(UCLASS_SPI, &bus);
#else
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
ret = uclass_get_device_by_seq(UCLASS_SPI, busnum, &bus);
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
#endif
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
if (ret) {
printf("Invalid bus %d (err=%d)\n", busnum, ret);
return ret;
}
ret = spi_find_chip_select(bus, cs, &dev);
/*
* If there is no such device, create one automatically. This means
* that we don't need a device tree node or platform data for the
* SPI flash chip - we will bind to the correct driver.
*/
if (ret == -ENODEV && drv_name) {
debug("%s: Binding new device '%s', busnum=%d, cs=%d, driver=%s\n",
__func__, dev_name, busnum, cs, drv_name);
dm: spi: Use device_bind_driver() instead of our own function The SPI function does the same thing, so we may as well just use the new generic function. The 'cs' parameter was not actually used, so can be dropped. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Heiko Schocher <hs@denx.de>
2014-11-11 17:46:23 +00:00
ret = device_bind_driver(bus, drv_name, dev_name, &dev);
spi: Add a debug() on bind failure This is an uncommon error but we may as well have a debug() message when it happens. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:05 +00:00
if (ret) {
debug("%s: Unable to bind driver (ret=%d)\n", __func__,
ret);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
return ret;
spi: Add a debug() on bind failure This is an uncommon error but we may as well have a debug() message when it happens. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:05 +00:00
}
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
plat = dev_get_parent_platdata(dev);
plat->cs = cs;
dm: spi: prevent setting a speed of 0 Hz When the device tree is missing a correct spi slave description below the bus (compatible "spi-flash" or spi-max-frequency are missing), the 'set_speed' callback can be called with 'speed' == 0 Hz. At least with cadence qspi, this leads to a division by zero. Prevent this by initializing speed to 100 kHz in this case (same fallback value as is done in 'dm_spi_claim_bus') and issue a warning to console. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-30 20:09:48 +00:00
if (speed) {
plat->max_hz = speed;
} else {
printf("Warning: SPI speed fallback to %u kHz\n",
SPI_DEFAULT_SPEED_HZ / 1000);
plat->max_hz = SPI_DEFAULT_SPEED_HZ;
}
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
plat->mode = mode;
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
created = true;
} else if (ret) {
printf("Invalid chip select %d:%d (err=%d)\n", busnum, cs,
ret);
return ret;
}
if (!device_active(dev)) {
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
struct spi_slave *slave;
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
ret = device_probe(dev);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
if (ret)
goto err;
dm: Rename dev_get_parentdata() to dev_get_parent_priv() The current name is inconsistent with other driver model data access functions. Rename it and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-29 05:32:01 +00:00
slave = dev_get_parent_priv(dev);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
slave->dev = dev;
}
dm: spi: Read default speed and mode values from DT In case of DT boot, don't read default speed and mode for SPI from CONFIG_*, instead read from DT node. This will make sure that boards with multiple SPI/QSPI controllers can be probed at different bus frequencies and SPI modes. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-06 04:34:28 +00:00
plat = dev_get_parent_platdata(dev);
dm: spi: Read default speed and mode values from DT This patch update the behavior introduced by commit 96907c0fe50a ("dm: spi: Read default speed and mode values from DT") In case of DT boot, don't read default speed and mode for SPI from CONFIG_* but instead read from DT node. This will make sure that boards with multiple SPI/QSPI controllers can be probed at different bus frequencies and SPI modes. Remove also use in boards of the value speed=0 (no more supported) for ENV in SPI by using CONFIG_ENV_SPI_MAX_HZ=0. DT values will be always used when available (full DM support of SPI slave with available DT node) even if speed and mode are requested; for example in splash screen support (in splash_sf_read_raw) or in SPL boot (in spl_spi_load_image). The caller of spi_get_bus_and_cs() no more need to force speed=0. But the current behavior don't change if the SPI slave is not present (device with generic driver is created automatically) or if platdata is used (CONFIG_OF_PLATDATA). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2019-02-27 14:36:44 +00:00
/* get speed and mode from platdata when available */
if (plat->max_hz) {
dm: spi: Read default speed and mode values from DT In case of DT boot, don't read default speed and mode for SPI from CONFIG_*, instead read from DT node. This will make sure that boards with multiple SPI/QSPI controllers can be probed at different bus frequencies and SPI modes. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-07-06 04:34:28 +00:00
speed = plat->max_hz;
mode = plat->mode;
}
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
ret = spi_set_speed_mode(bus, speed, mode);
if (ret)
goto err;
*busp = bus;
dm: Rename dev_get_parentdata() to dev_get_parent_priv() The current name is inconsistent with other driver model data access functions. Rename it and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2015-09-29 05:32:01 +00:00
*devp = dev_get_parent_priv(dev);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
debug("%s: bus=%p, slave=%p\n", __func__, bus, *devp);
return 0;
err:
spi: spi-uclass: fix typo in debug output Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com>
2016-04-21 07:28:02 +00:00
debug("%s: Error path, created=%d, device '%s'\n", __func__,
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
created, dev->name);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
if (created) {
dm: core: Add flags parameter to device_remove() This patch adds the flags parameter to device_remove() and changes all calls to this function to provide the default value of DM_REMOVE_NORMAL for "normal" device removal. This is in preparation for the driver specific pre-OS (e.g. DMA cancelling) remove support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-20 11:51:48 +00:00
device_remove(dev, DM_REMOVE_NORMAL);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
device_unbind(dev);
}
return ret;
}
/* Compatibility function - to be removed */
struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs,
unsigned int speed, unsigned int mode)
{
struct spi_slave *slave;
struct udevice *dev;
int ret;
ret = spi_get_bus_and_cs(busnum, cs, speed, mode, NULL, 0, &dev,
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
&slave);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
if (ret)
return NULL;
return slave;
}
void spi_free_slave(struct spi_slave *slave)
{
dm: core: Add flags parameter to device_remove() This patch adds the flags parameter to device_remove() and changes all calls to this function to provide the default value of DM_REMOVE_NORMAL for "normal" device removal. This is in preparation for the driver specific pre-OS (e.g. DMA cancelling) remove support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2017-03-20 11:51:48 +00:00
device_remove(slave->dev, DM_REMOVE_NORMAL);
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
slave->dev = NULL;
}
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
int spi_slave_ofdata_to_platdata(struct udevice *dev,
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
struct dm_spi_slave_platdata *plat)
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
{
spi: Use mode for rx mode flags Make rx mode flags as generic to spi, earlier mode_rx is maintained separately because of some flash specific code. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-08-08 11:42:12 +00:00
int mode = 0;
spi: Add support for dual and quad mode spi bus can support dual and quad wire data transfers for tx and rx. So defining dual and quad modes for both tx and rx. Also add support to parse bus width used for spi tx and rx transfers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-23 15:09:37 +00:00
int value;
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
plat->cs = dev_read_u32_default(dev, "reg", -1);
dm: spi: prevent setting a speed of 0 Hz When the device tree is missing a correct spi slave description below the bus (compatible "spi-flash" or spi-max-frequency are missing), the 'set_speed' callback can be called with 'speed' == 0 Hz. At least with cadence qspi, this leads to a division by zero. Prevent this by initializing speed to 100 kHz in this case (same fallback value as is done in 'dm_spi_claim_bus') and issue a warning to console. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-30 20:09:48 +00:00
plat->max_hz = dev_read_u32_default(dev, "spi-max-frequency",
SPI_DEFAULT_SPEED_HZ);
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
if (dev_read_bool(dev, "spi-cpol"))
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
mode |= SPI_CPOL;
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
if (dev_read_bool(dev, "spi-cpha"))
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
mode |= SPI_CPHA;
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
if (dev_read_bool(dev, "spi-cs-high"))
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
mode |= SPI_CS_HIGH;
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
if (dev_read_bool(dev, "spi-3wire"))
spi: Get spi-3wire from dts spi-3wire is used when SI/SO signals shared so get the same from dts node and assign to mode on slave plat->mode. Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-03 16:49:05 +00:00
mode |= SPI_3WIRE;
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
if (dev_read_bool(dev, "spi-half-duplex"))
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
mode |= SPI_PREAMBLE;
spi: Add support for dual and quad mode spi bus can support dual and quad wire data transfers for tx and rx. So defining dual and quad modes for both tx and rx. Also add support to parse bus width used for spi tx and rx transfers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-23 15:09:37 +00:00
/* Device DUAL/QUAD mode */
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
value = dev_read_u32_default(dev, "spi-tx-bus-width", 1);
spi: Add support for dual and quad mode spi bus can support dual and quad wire data transfers for tx and rx. So defining dual and quad modes for both tx and rx. Also add support to parse bus width used for spi tx and rx transfers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-23 15:09:37 +00:00
switch (value) {
case 1:
break;
case 2:
mode |= SPI_TX_DUAL;
break;
case 4:
mode |= SPI_TX_QUAD;
break;
default:
spi: Add error checking for invalid bus widths At present an invalid bus width prints a message but does not return an error. This is the opposite of the correct behaviour. Adjust it to avoid code bloat in the common case, and avoid hard-to-debug failure in the uncommon case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-30 03:00:13 +00:00
warn_non_spl("spi-tx-bus-width %d not supported\n", value);
spi: Add support for dual and quad mode spi bus can support dual and quad wire data transfers for tx and rx. So defining dual and quad modes for both tx and rx. Also add support to parse bus width used for spi tx and rx transfers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-23 15:09:37 +00:00
break;
}
dm: spi: Convert uclass to livetree Update the SPI uclass to support a live device tree. Also adjust spi_slave_ofdata_to_platdata() to accept a device instead of a blob and offset. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-19 02:09:54 +00:00
value = dev_read_u32_default(dev, "spi-rx-bus-width", 1);
spi: Add support for dual and quad mode spi bus can support dual and quad wire data transfers for tx and rx. So defining dual and quad modes for both tx and rx. Also add support to parse bus width used for spi tx and rx transfers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-23 15:09:37 +00:00
switch (value) {
case 1:
break;
case 2:
spi: Use mode for rx mode flags Make rx mode flags as generic to spi, earlier mode_rx is maintained separately because of some flash specific code. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-08-08 11:42:12 +00:00
mode |= SPI_RX_DUAL;
spi: Add support for dual and quad mode spi bus can support dual and quad wire data transfers for tx and rx. So defining dual and quad modes for both tx and rx. Also add support to parse bus width used for spi tx and rx transfers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-23 15:09:37 +00:00
break;
case 4:
spi: Use mode for rx mode flags Make rx mode flags as generic to spi, earlier mode_rx is maintained separately because of some flash specific code. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-08-08 11:42:12 +00:00
mode |= SPI_RX_QUAD;
spi: Add support for dual and quad mode spi bus can support dual and quad wire data transfers for tx and rx. So defining dual and quad modes for both tx and rx. Also add support to parse bus width used for spi tx and rx transfers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-23 15:09:37 +00:00
break;
default:
spi: Add error checking for invalid bus widths At present an invalid bus width prints a message but does not return an error. This is the opposite of the correct behaviour. Adjust it to avoid code bloat in the common case, and avoid hard-to-debug failure in the uncommon case. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
2016-11-30 03:00:13 +00:00
warn_non_spl("spi-rx-bus-width %d not supported\n", value);
spi: Add support for dual and quad mode spi bus can support dual and quad wire data transfers for tx and rx. So defining dual and quad modes for both tx and rx. Also add support to parse bus width used for spi tx and rx transfers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-23 15:09:37 +00:00
break;
}
spi: Use mode for rx mode flags Make rx mode flags as generic to spi, earlier mode_rx is maintained separately because of some flash specific code. Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Cc: Vignesh R <vigneshr@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2016-08-08 11:42:12 +00:00
plat->mode = mode;
spi: Add support for dual and quad mode spi bus can support dual and quad wire data transfers for tx and rx. So defining dual and quad modes for both tx and rx. Also add support to parse bus width used for spi tx and rx transfers. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Jagan Teki <jteki@openedev.com>
2015-12-23 15:09:37 +00:00
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
return 0;
}
UCLASS_DRIVER(spi) = {
.id = UCLASS_SPI,
.name = "spi",
dm: core: Add a flag to control sequence numbering At present we try to use the 'reg' property and device tree aliases to give devices a sequence number. The 'reg' property is often actually a memory address, so the sequence numbers thus-obtained are not useful. It would be better if the devices were just sequentially numbered in that case. In fact neither I2C nor SPI use this feature, so drop it. Some devices need us to look up an alias to number them within the uclass. Add a flag to control this, so it is not done unless it is needed. Adjust the tests to test this new behaviour. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-01-25 15:27:05 +00:00
.flags = DM_UC_FLAG_SEQ_ALIAS,
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
dm: Use dm_scan_fdt_dev() directly where possible Quite a few places have a bind() method which just calls dm_scan_fdt_dev(). We may as well call dm_scan_fdt_dev() directly. Update the code to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-05 23:10:10 +00:00
.post_bind = dm_scan_fdt_dev,
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
#endif
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
.post_probe = spi_post_probe,
dm: spi: Set up the spi_slave device pointer in child_pre_probe() At present we use struct spi_slave as our device pointer in a lot of places to avoid changing the old SPI API. At some point this will go away. But for now, it is better if the SPI uclass sets up this pointer, rather than relying on passing it into the device when it is probed. We can use the new uclass child_pre_probe() method to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:11 +00:00
.child_pre_probe = spi_child_pre_probe,
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
.per_device_auto_alloc_size = sizeof(struct dm_spi_bus),
dm: spi: Move the per-child data size to the uclass This is common to all SPI drivers and specifies a structure used by the uclass. It makes more sense to define it in the uclass. Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:07 +00:00
.per_child_auto_alloc_size = sizeof(struct spi_slave),
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
.per_child_platdata_auto_alloc_size =
sizeof(struct dm_spi_slave_platdata),
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
dm: spi: Move slave details to child platdata At present we go through various contortions to store the SPI slave's chip select in its private data. This only exists when the slave is active so must be set up when it is probed. Until the device is probed we don't actually know what chip select it will appear on. However, now that we can support per-child platform data, we can use that instead. This allows us to set up the chip select when the child is bound, and avoid the messy contortions. Unfortunately this is a fairly large change and it seems to be difficult to break it down further. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-25 15:27:12 +00:00
.child_post_bind = spi_child_post_bind,
spi: Add of-platdata support to SPI and SPI flash Some boards may want to use these subsystems with of-platdata in SPL. Add support for this by avoiding any device tree access in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-13 21:22:01 +00:00
#endif
dm: spi: Add a uclass for SPI Add a uclass which provides access to SPI buses and includes operations required by SPI. For a time driver model will need to co-exist with the legacy SPI interface so some parts of the header file are changed depending on which is in use. The exports are adjusted also since some functions are not available with driver model. Boards must define CONFIG_DM_SPI to use driver model for SPI. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> (Discussed some follow-up comments which will address in future add-ons)
2014-10-14 05:41:52 +00:00
};
UCLASS_DRIVER(spi_generic) = {
.id = UCLASS_SPI_GENERIC,
.name = "spi_generic",
};
U_BOOT_DRIVER(spi_generic_drv) = {
.name = "spi_generic_drv",
.id = UCLASS_SPI_GENERIC,
};
Reference in a new issue Copy permalink