Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-28 15:41:40 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/test/cmd_ut.c

247 lines
6.4 KiB
C
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
/*
* (C) Copyright 2015
* Joe Hershberger, National Instruments, joe.hershberger@ni.com
*/
#include <common.h>
#include <command.h>
test: Add a flag for tests that need console recording Allow tests that need console recording to be marked, so they can be skipped if it is not available. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-29 01:41:13 +00:00
#include <console.h>
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
#include <test/suites.h>
test: Add a command function for test execution The logic to either iterate through a list of tests or pick a named test is common to at lest two test suits. Move this logic into a new function and call it from the environment tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-25 18:57:29 +00:00
#include <test/test.h>
test: Add an overall test runner Add a new test runner that will eventually be able to run any test. For now, have it run the 'command' unit tests, so that the functionality in cmd_ut_category() moves into it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-08 00:34:47 +00:00
#include <test/ut.h>
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
command: Remove the cmd_tbl_t typedef We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:40:03 +00:00
static int do_ut_all(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[]);
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
test: Allow showing basic information about tests Add a 'ut info' command to show the number of suites and tests. This is useful to get a feel for the scale of the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:12 +00:00
static int do_ut_info(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[]);
cmd_ut: add a parameter prefix to the function cmd_ut_category There is black magic in the file conftest.py that list all the test unit. Then, all those test unit are called in pytest. This call is done with the end of the name (for example checksum if the full name is bloblist_test_checksum). The result is that only test for dm are really executed. by pytest, all others tests are listed but never executed. This behaviour happens because the dm test unit only check the end of the name and others tests checks the full name. To fix this issue, I've added a prefix to the function cmd_ut_category, and this prefix is removed when looking for the unit test. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-12-17 18:07:04 +00:00
int cmd_ut_category(const char *name, const char *prefix,
struct unit_test *tests, int n_ents,
command: Remove the cmd_tbl_t typedef We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:40:03 +00:00
int argc, char *const argv[])
test: Add a command function for test execution The logic to either iterate through a list of tests or pick a named test is common to at lest two test suits. Move this logic into a new function and call it from the environment tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-25 18:57:29 +00:00
{
test: Add a way to detect a test that breaks another When running unit tests, some may have side effects which cause a subsequent test to break. This can sometimes be seen when using 'ut dm' or similar. Add a new argument which allows a particular (failing) test to be run immediately after a certain number of tests have run. This allows the test causing the failure to be determined. Update the documentation also. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:13 +00:00
const char *test_insert = NULL;
test: Allow running tests multiple times Some tests can have race conditions which are hard to detect on a single one. Add a way to run tests more than once, to help with this. Each individual test is run the requested number of times before moving to the next test. If any runs failed, a message is shown. This is most useful when running a single test, since running all tests multiple times can take a while. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-01 13:58:45 +00:00
int runs_per_text = 1;
test: Support tests which can only be run manually At present we normally write tests either in Python or in C. But most Python tests end up doing a lot of checks which would be better done in C. Checks done in C are orders of magnitude faster and it is possible to get full access to U-Boot's internal workings, rather than just relying on the command line. The model is to have a Python test set up some things and then use C code (in a unit test) to check that they were done correctly. But we don't want those checks to happen as part of normal test running, since each C unit tests is dependent on the associate Python tests, so cannot run without it. To acheive this, add a new UT_TESTF_MANUAL flag to use with the C 'check' tests, so that they can be skipped by default when the 'ut' command is used. Require that tests have a name ending with '_norun', so that pytest knows to skip them. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:50 +00:00
bool force_run = false;
test: Add an overall test runner Add a new test runner that will eventually be able to run any test. For now, have it run the 'command' unit tests, so that the functionality in cmd_ut_category() moves into it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-08 00:34:47 +00:00
int ret;
test: Add a command function for test execution The logic to either iterate through a list of tests or pick a named test is common to at lest two test suits. Move this logic into a new function and call it from the environment tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-25 18:57:29 +00:00
test: Support tests which can only be run manually At present we normally write tests either in Python or in C. But most Python tests end up doing a lot of checks which would be better done in C. Checks done in C are orders of magnitude faster and it is possible to get full access to U-Boot's internal workings, rather than just relying on the command line. The model is to have a Python test set up some things and then use C code (in a unit test) to check that they were done correctly. But we don't want those checks to happen as part of normal test running, since each C unit tests is dependent on the associate Python tests, so cannot run without it. To acheive this, add a new UT_TESTF_MANUAL flag to use with the C 'check' tests, so that they can be skipped by default when the 'ut' command is used. Require that tests have a name ending with '_norun', so that pytest knows to skip them. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:50 +00:00
while (argc > 1 && *argv[1] == '-') {
const char *str = argv[1];
switch (str[1]) {
case 'r':
runs_per_text = dectoul(str + 2, NULL);
break;
case 'f':
force_run = true;
break;
test: Add a way to detect a test that breaks another When running unit tests, some may have side effects which cause a subsequent test to break. This can sometimes be seen when using 'ut dm' or similar. Add a new argument which allows a particular (failing) test to be run immediately after a certain number of tests have run. This allows the test causing the failure to be determined. Update the documentation also. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:13 +00:00
case 'I':
test_insert = str + 2;
break;
test: Support tests which can only be run manually At present we normally write tests either in Python or in C. But most Python tests end up doing a lot of checks which would be better done in C. Checks done in C are orders of magnitude faster and it is possible to get full access to U-Boot's internal workings, rather than just relying on the command line. The model is to have a Python test set up some things and then use C code (in a unit test) to check that they were done correctly. But we don't want those checks to happen as part of normal test running, since each C unit tests is dependent on the associate Python tests, so cannot run without it. To acheive this, add a new UT_TESTF_MANUAL flag to use with the C 'check' tests, so that they can be skipped by default when the 'ut' command is used. Require that tests have a name ending with '_norun', so that pytest knows to skip them. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:50 +00:00
}
test: Allow running tests multiple times Some tests can have race conditions which are hard to detect on a single one. Add a way to run tests more than once, to help with this. Each individual test is run the requested number of times before moving to the next test. If any runs failed, a message is shown. This is most useful when running a single test, since running all tests multiple times can take a while. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-01 13:58:45 +00:00
argv++;
test: Add a way to detect a test that breaks another When running unit tests, some may have side effects which cause a subsequent test to break. This can sometimes be seen when using 'ut dm' or similar. Add a new argument which allows a particular (failing) test to be run immediately after a certain number of tests have run. This allows the test causing the failure to be determined. Update the documentation also. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:13 +00:00
argc--;
test: Allow running tests multiple times Some tests can have race conditions which are hard to detect on a single one. Add a way to run tests more than once, to help with this. Each individual test is run the requested number of times before moving to the next test. If any runs failed, a message is shown. This is most useful when running a single test, since running all tests multiple times can take a while. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-08-01 13:58:45 +00:00
}
test: Add an overall test runner Add a new test runner that will eventually be able to run any test. For now, have it run the 'command' unit tests, so that the functionality in cmd_ut_category() moves into it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-08 00:34:47 +00:00
ret = ut_run_list(name, prefix, tests, n_ents,
test: Add a way to detect a test that breaks another When running unit tests, some may have side effects which cause a subsequent test to break. This can sometimes be seen when using 'ut dm' or similar. Add a new argument which allows a particular (failing) test to be run immediately after a certain number of tests have run. This allows the test causing the failure to be determined. Update the documentation also. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:13 +00:00
argc > 1 ? argv[1] : NULL, runs_per_text, force_run,
test_insert);
test: Add a command function for test execution The logic to either iterate through a list of tests or pick a named test is common to at lest two test suits. Move this logic into a new function and call it from the environment tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-25 18:57:29 +00:00
test: Add an overall test runner Add a new test runner that will eventually be able to run any test. For now, have it run the 'command' unit tests, so that the functionality in cmd_ut_category() moves into it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-08 00:34:47 +00:00
return ret ? CMD_RET_FAILURE : 0;
test: Add a command function for test execution The logic to either iterate through a list of tests or pick a named test is common to at lest two test suits. Move this logic into a new function and call it from the environment tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-11-25 18:57:29 +00:00
}
command: Remove the cmd_tbl_t typedef We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:40:03 +00:00
static struct cmd_tbl cmd_ut_sub[] = {
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
U_BOOT_CMD_MKENT(all, CONFIG_SYS_MAXARGS, 1, do_ut_all, "", ""),
test: Allow showing basic information about tests Add a 'ut info' command to show the number of suites and tests. This is useful to get a feel for the scale of the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:12 +00:00
U_BOOT_CMD_MKENT(info, 1, 1, do_ut_info, "", ""),
test: bdinfo: Add test for command bdinfo Add test for command bdinfo . Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-31 01:03:58 +00:00
#ifdef CONFIG_CMD_BDI
U_BOOT_CMD_MKENT(bdinfo, CONFIG_SYS_MAXARGS, 1, do_ut_bdinfo, "", ""),
#endif
bootstd: Add tests for bootstd including all uclasses Add a set of combined tests for the bootdev, bootflow and bootmeth commands, along with associated functionality. Expand the sandbox console-recording limit so that these can work. These tests rely on a filesystem script which is not yet added to the Python tests. It is included here as a shell script. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:24 +00:00
#ifdef CONFIG_BOOTSTD
U_BOOT_CMD_MKENT(bootstd, CONFIG_SYS_MAXARGS, 1, do_ut_bootstd,
"", ""),
#endif
test: add first autoboot unit tests This adds tests for the crypt-based and plain SHA256-based password hashing algorithms in the autoboot flow. Signed-off-by: Steffen Jaeckel <jaeckel-floss@eyet-services.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-08 13:57:40 +00:00
U_BOOT_CMD_MKENT(common, CONFIG_SYS_MAXARGS, 1, do_ut_common, "", ""),
test: dm: Move the dm tests over to the ut command Unify the command for running unit tests further by moving the "dm test" command over to "ut dm". Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:29 +00:00
#if defined(CONFIG_UT_DM)
U_BOOT_CMD_MKENT(dm, CONFIG_SYS_MAXARGS, 1, do_ut_dm, "", ""),
#endif
test: env: Add test framework for env Add a new "env" subcommand to the ut command. This will run unit tests on the env code. This should be targetable to any device that supports the env features needed for the tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:36 +00:00
#if defined(CONFIG_UT_ENV)
U_BOOT_CMD_MKENT(env, CONFIG_SYS_MAXARGS, 1, do_ut_env, "", ""),
#endif
test: cmd: exit: Add unit test for exit and partly run commands Add a test which validates that exit from environment script works as expected, including return value propagation and clipping to positive integers. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de>
2022-12-20 06:26:00 +00:00
U_BOOT_CMD_MKENT(exit, CONFIG_SYS_MAXARGS, 1, do_ut_exit, "", ""),
fdt: Start a test for the fdt command Add a basic test of the 'fdt addr' command, to kick things off. This includes a new convenience function to run a command from a printf() string. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-07-13 12:06:59 +00:00
#ifdef CONFIG_CMD_FDT
U_BOOT_CMD_MKENT(fdt, CONFIG_SYS_MAXARGS, 1, do_ut_fdt, "", ""),
#endif
video: Add commands to list and change fonts Add a new 'font' command which allows the fonts to be listed as well as selecting a different font and size. Allow the test to run on sandbox, where multiple font/size combinations are supported, as well as sandbox_flattree, where they are not. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-06 14:36:16 +00:00
#ifdef CONFIG_CONSOLE_TRUETYPE
U_BOOT_CMD_MKENT(font, CONFIG_SYS_MAXARGS, 1, do_ut_font, "", ""),
#endif
tests: add OP-TEE test suite OP-TEE can get supplied with a devicetree and will then insert its firmware node and reserved-memory sections into it. As this devicetree often is not the one supplied to a later loaded kernel, a previous commit added functionality to transfer these nodes onto that new devicetree. To make sure this functionality stays intact, also add a test for the transfer functionality. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-23 14:46:41 +00:00
#ifdef CONFIG_UT_OPTEE
U_BOOT_CMD_MKENT(optee, CONFIG_SYS_MAXARGS, 1, do_ut_optee, "", ""),
#endif
tests: Introduce DT overlay tests This adds a bunch of unit tests for the "fdt apply" command. They've all been run successfully in the sandbox. However, as you still require an out-of-tree dtc with overlay support, this is disabled by default. Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-05 08:26:46 +00:00
#ifdef CONFIG_UT_OVERLAY
U_BOOT_CMD_MKENT(overlay, CONFIG_SYS_MAXARGS, 1, do_ut_overlay, "", ""),
#endif
test: provide unit test for memory functions Memory functions may have architecture specific implementations. These should be tested. Provide unit tests for memset(), memcpy(), memmove(). Provide a 'ut lib' sub-command to execute the tests. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-30 06:53:31 +00:00
#ifdef CONFIG_UT_LIB
U_BOOT_CMD_MKENT(lib, CONFIG_SYS_MAXARGS, 1, do_ut_lib, "", ""),
#endif
test: log functions with CONFIG_LOG=n If CONFIG_LOG=n, we still expect output for log_err(), log_warning(), log_notice(), log_info() and in case of DEBUG=1 also for log_debug(). Provide unit tests verifying this. The tests depend on: CONFIG_CONSOLE_RECORD=y CONFIG_LOG=n CONFIG_UT_LOG=y It may be necessary to increase the value of CONFIG_SYS_MALLOC_F_LEN to accommodate CONFIG_CONSOLE_RECORD=y. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-26 20:48:18 +00:00
#ifdef CONFIG_UT_LOG
U_BOOT_CMD_MKENT(log, CONFIG_SYS_MAXARGS, 1, do_ut_log, "", ""),
#endif
cmd: Update the memory-search command Add various fixes and improvements to this command that were missed in the original version. Unfortunately I forgot to send v2. - Fix Kconfig name - Use a separate variable for the remaining search length - Correct a minor bug - Move into a separate test suite - Add -q flag to the 'quiet' test to test operation when console is enabled - Enable the feature for sandbox Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-29 01:41:14 +00:00
U_BOOT_CMD_MKENT(mem, CONFIG_SYS_MAXARGS, 1, do_ut_mem, "", ""),
test: run setexpr test only on sandbox The test relies on memory being available at 0x0. This in not valid for many boards. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-10-01 19:42:35 +00:00
#if defined(CONFIG_SANDBOX) && defined(CONFIG_CMD_SETEXPR)
test: Add some tests for setexpr This command currently has no tests. Add some for basic assignment and the integer operations. Note that the default size for setexpr is ulong, which varies depending on the build machine. So for sandbox on a 64-bit host, this means that the default size is 64 bits. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-01 21:15:35 +00:00
U_BOOT_CMD_MKENT(setexpr, CONFIG_SYS_MAXARGS, 1, do_ut_setexpr, "",
""),
test: missing dependency for test/cmd/setexpr.c test/cmd/setexpr.c cannot be linked with CONFIG_CMD_SETEXPR=n: ld.bfd: test/built-in.o: in function `setexpr_test_sub': test/cmd/setexpr.c:227: undefined reference to `setexpr_regex_sub' ld.bfd: test/built-in.o: in function `setexpr_test_backref': test/cmd/setexpr.c:267: undefined reference to `setexpr_regex_sub' Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-17 11:58:14 +00:00
#endif
test: Convert print tests to use ut framework This test predates the test framework in U-Boot. It uses #define DEBUG and assert() to check the result. Update it to use the framework so it can report failure constitent with other tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-05-08 12:59:58 +00:00
U_BOOT_CMD_MKENT(print, CONFIG_SYS_MAXARGS, 1, do_ut_print, "", ""),
test: dm: Move the time test over to the ut command Unify the command for running unit tests further by moving the "ut_time" command over to "ut time". Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-20 19:27:30 +00:00
#ifdef CONFIG_UT_TIME
U_BOOT_CMD_MKENT(time, CONFIG_SYS_MAXARGS, 1, do_ut_time, "", ""),
#endif
test: unit tests for Unicode functions Provide unit tests for Unicode functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-31 19:31:28 +00:00
#if CONFIG_IS_ENABLED(UT_UNICODE) && !defined(API_BUILD)
U_BOOT_CMD_MKENT(unicode, CONFIG_SYS_MAXARGS, 1, do_ut_unicode, "", ""),
#endif
test: compression: Convert to unit test framework Adjust this test to use the unit test framework. Drop the two existing commands for running the tests and replace them with a single 'ut compression' command, with sub-commands. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Continue to have ret = run_test_internal(...) in run_test so ret is always initialized] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-25 18:57:33 +00:00
#ifdef CONFIG_SANDBOX
U_BOOT_CMD_MKENT(compression, CONFIG_SYS_MAXARGS, 1, do_ut_compression,
"", ""),
test: Add a simple test for bloblist Add a unit test for the bloblist functionality and enable bloblist for sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-16 01:43:53 +00:00
U_BOOT_CMD_MKENT(bloblist, CONFIG_SYS_MAXARGS, 1, do_ut_bloblist,
"", ""),
bootm: Add tests for fixup_silent_linux() This function currently has no tests. Export it so that we can implement a simple test on sandbox. Use IS_ENABLED() to remove the unused code, instead #ifdef. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-05 17:33:38 +00:00
U_BOOT_CMD_MKENT(bootm, CONFIG_SYS_MAXARGS, 1, do_ut_bootm, "", ""),
test: compression: Convert to unit test framework Adjust this test to use the unit test framework. Drop the two existing commands for running the tests and replace them with a single 'ut compression' command, with sub-commands. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Continue to have ret = run_test_internal(...) in run_test so ret is always initialized] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-25 18:57:33 +00:00
#endif
test: inconsistent string tests Excluding ut str in test/cmd_ut.c but compiling test/str_ut.c results in failure of the Python test invoking the C unit tests as observed on sipeed_riscv_smode_defconfig: FAILED test/py/tests/test_ut.py::test_ut[ut_str_upper] Allow to compile test/str_ut.c on all boards. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-17 23:17:34 +00:00
U_BOOT_CMD_MKENT(str, CONFIG_SYS_MAXARGS, 1, do_ut_str, "", ""),
test: cmd: Add a basic test for 'addrmap' command This adds a basic test for the newly introduced 'addrmap' command. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [Rebase] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:35 +00:00
#ifdef CONFIG_CMD_ADDRMAP
U_BOOT_CMD_MKENT(addrmap, CONFIG_SYS_MAXARGS, 1, do_ut_addrmap, "", ""),
#endif
cmd: load: add load command for memory mapped cp.b is used a lot as a way to load binaries to memory and execute them, however we may need to integrate this with the efi subsystem to set it up as a bootdev. So, introduce a loadm command that will be consistent with the other loadX commands and will call the efi API's. ex: loadm $kernel_addr $kernel_addr_r $kernel_size with this a kernel with CONFIG_EFI_STUB enabled will be loaded and then subsequently booted with bootefi command. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-05-11 09:55:40 +00:00
#ifdef CONFIG_CMD_LOADM
U_BOOT_CMD_MKENT(loadm, CONFIG_SYS_MAXARGS, 1, do_ut_loadm, "", ""),
#endif
test: Add test for new command pci_mps Adds a test for the new pci_mps command to ensure that it can set the Maximum Payload Size (MPS) of all devices to 256 bytes in the sandbox environment. Enables the pci_mps command in the sandbox environment so that this test can be run. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
2023-03-10 19:07:15 +00:00
#ifdef CONFIG_CMD_PCI_MPS
U_BOOT_CMD_MKENT(pci_mps, CONFIG_SYS_MAXARGS, 1, do_ut_pci_mps, "", ""),
#endif
cmd: Add a SEAMA image load command Add a command to load SEAMA (Seattle Image), a NAND flash on-flash storage format. This type of flash image is found in some D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This U-Boot command will read and decode a SEAMA image from raw NAND flash on any platform. As it is always using big endian format for the data decoding is always necessary on platforms such as ARM. The command is needed to read a SEAMA-encoded boot image on the D-Link DIR-890L router for boot from NAND flash in an upcoming port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx) architecture. A basic test and documentation is added as well. The test must be run on a target with NAND flash support and at least one resident SEAMA image in flash. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-31 23:16:13 +00:00
#ifdef CONFIG_CMD_SEAMA
U_BOOT_CMD_MKENT(seama, CONFIG_SYS_MAXARGS, 1, do_ut_seama, "", ""),
#endif
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
};
command: Remove the cmd_tbl_t typedef We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:40:03 +00:00
static int do_ut_all(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
{
int i;
int retval;
int any_fail = 0;
for (i = 1; i < ARRAY_SIZE(cmd_ut_sub); i++) {
printf("----Running %s tests----\n", cmd_ut_sub[i].name);
retval = cmd_ut_sub[i].cmd(cmdtp, flag, 1, &cmd_ut_sub[i].name);
if (!any_fail)
any_fail = retval;
}
return any_fail;
}
test: Allow showing basic information about tests Add a 'ut info' command to show the number of suites and tests. This is useful to get a feel for the scale of the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:12 +00:00
static int do_ut_info(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
printf("Test suites: %d\n", (int)ARRAY_SIZE(cmd_ut_sub));
printf("Total tests: %d\n", (int)UNIT_TEST_ALL_COUNT());
return 0;
}
command: Remove the cmd_tbl_t typedef We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:40:03 +00:00
static int do_ut(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
{
command: Remove the cmd_tbl_t typedef We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-10 17:40:03 +00:00
struct cmd_tbl *cp;
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
if (argc < 2)
return CMD_RET_USAGE;
/* drop initial "ut" arg */
argc--;
argv++;
cp = find_cmd_tbl(argv[0], cmd_ut_sub, ARRAY_SIZE(cmd_ut_sub));
if (cp)
return cp->cmd(cmdtp, flag, argc, argv);
return CMD_RET_USAGE;
}
#ifdef CONFIG_SYS_LONGHELP
static char ut_help_text[] =
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"[-r] [-f] [<suite>] - run unit tests\n"
" -r<runs> Number of times to run each test\n"
" -f Force 'manual' tests to run as well\n"
" <suite> Test suite to run, or all\n"
"\n"
test: Allow showing basic information about tests Add a 'ut info' command to show the number of suites and tests. This is useful to get a feel for the scale of the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:12 +00:00
"\nOptions for <suite>:"
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nall - execute all enabled tests"
test: Allow showing basic information about tests Add a 'ut info' command to show the number of suites and tests. This is useful to get a feel for the scale of the tests. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:12 +00:00
"\ninfo - show info about tests"
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
#ifdef CONFIG_CMD_ADDRMAP
"\naddrmap - very basic test of addrmap command"
#endif
test: bdinfo: Add test for command bdinfo Add test for command bdinfo . Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-05-31 01:03:58 +00:00
#ifdef CONFIG_CMD_BDI
"\nbdinfo - bdinfo command"
#endif
test: unit tests for Unicode functions Provide unit tests for Unicode functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-31 19:31:28 +00:00
#ifdef CONFIG_SANDBOX
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nbloblist - bloblist implementation"
test: unit tests for Unicode functions Provide unit tests for Unicode functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-31 19:31:28 +00:00
#endif
bootstd: Add tests for bootstd including all uclasses Add a set of combined tests for the bootdev, bootflow and bootmeth commands, along with associated functionality. Expand the sandbox console-recording limit so that these can work. These tests rely on a filesystem script which is not yet added to the Python tests. It is included here as a shell script. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:24 +00:00
#ifdef CONFIG_BOOTSTD
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nbootstd - standard boot implementation"
#endif
#ifdef CONFIG_SANDBOX
"\ncompression - compressors and bootm decompression"
bootstd: Add tests for bootstd including all uclasses Add a set of combined tests for the bootdev, bootflow and bootmeth commands, along with associated functionality. Expand the sandbox console-recording limit so that these can work. These tests rely on a filesystem script which is not yet added to the Python tests. It is included here as a shell script. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-25 05:31:24 +00:00
#endif
test: dm: Move the dm tests over to the ut command Unify the command for running unit tests further by moving the "dm test" command over to "ut dm". Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:29 +00:00
#ifdef CONFIG_UT_DM
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\ndm - driver model"
test: dm: Move the time test over to the ut command Unify the command for running unit tests further by moving the "ut_time" command over to "ut time". Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-20 19:27:30 +00:00
#endif
test: env: Add test framework for env Add a new "env" subcommand to the ut command. This will run unit tests on the env code. This should be targetable to any device that supports the env features needed for the tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:36 +00:00
#ifdef CONFIG_UT_ENV
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nenv - environment"
test: env: Add test framework for env Add a new "env" subcommand to the ut command. This will run unit tests on the env code. This should be targetable to any device that supports the env features needed for the tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:36 +00:00
#endif
fdt: Start a test for the fdt command Add a basic test of the 'fdt addr' command, to kick things off. This includes a new convenience function to run a command from a printf() string. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-07-13 12:06:59 +00:00
#ifdef CONFIG_CMD_FDT
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nfdt - fdt command"
fdt: Start a test for the fdt command Add a basic test of the 'fdt addr' command, to kick things off. This includes a new convenience function to run a command from a printf() string. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-07-13 12:06:59 +00:00
#endif
video: Add commands to list and change fonts Add a new 'font' command which allows the fonts to be listed as well as selecting a different font and size. Allow the test to run on sandbox, where multiple font/size combinations are supported, as well as sandbox_flattree, where they are not. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-06 14:36:16 +00:00
#ifdef CONFIG_CONSOLE_TRUETYPE
test: Fix the help for the ut command Drop the 'ut' prefix, this is superfluous and not present in any of the other ut tests. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-08-12 22:16:41 +00:00
"\nfont - font command"
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
#endif
#ifdef CONFIG_CMD_LOADM
"\nloadm - loadm command parameters and loading memory blob"
video: Add commands to list and change fonts Add a new 'font' command which allows the fonts to be listed as well as selecting a different font and size. Allow the test to run on sandbox, where multiple font/size combinations are supported, as well as sandbox_flattree, where they are not. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-06 14:36:16 +00:00
#endif
test: provide unit test for memory functions Memory functions may have architecture specific implementations. These should be tested. Provide unit tests for memset(), memcpy(), memmove(). Provide a 'ut lib' sub-command to execute the tests. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-30 06:53:31 +00:00
#ifdef CONFIG_UT_LIB
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nlib - library functions"
test: provide unit test for memory functions Memory functions may have architecture specific implementations. These should be tested. Provide unit tests for memset(), memcpy(), memmove(). Provide a 'ut lib' sub-command to execute the tests. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-30 06:53:31 +00:00
#endif
test: log functions with CONFIG_LOG=n If CONFIG_LOG=n, we still expect output for log_err(), log_warning(), log_notice(), log_info() and in case of DEBUG=1 also for log_debug(). Provide unit tests verifying this. The tests depend on: CONFIG_CONSOLE_RECORD=y CONFIG_LOG=n CONFIG_UT_LOG=y It may be necessary to increase the value of CONFIG_SYS_MALLOC_F_LEN to accommodate CONFIG_CONSOLE_RECORD=y. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-26 20:48:18 +00:00
#ifdef CONFIG_UT_LOG
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nlog - logging functions"
test: log functions with CONFIG_LOG=n If CONFIG_LOG=n, we still expect output for log_err(), log_warning(), log_notice(), log_info() and in case of DEBUG=1 also for log_debug(). Provide unit tests verifying this. The tests depend on: CONFIG_CONSOLE_RECORD=y CONFIG_LOG=n CONFIG_UT_LOG=y It may be necessary to increase the value of CONFIG_SYS_MALLOC_F_LEN to accommodate CONFIG_CONSOLE_RECORD=y. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-02-26 20:48:18 +00:00
#endif
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nmem - memory-related commands"
tests: add OP-TEE test suite OP-TEE can get supplied with a devicetree and will then insert its firmware node and reserved-memory sections into it. As this devicetree often is not the one supplied to a later loaded kernel, a previous commit added functionality to transfer these nodes onto that new devicetree. To make sure this functionality stays intact, also add a test for the transfer functionality. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-23 14:46:41 +00:00
#ifdef CONFIG_UT_OPTEE
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\noptee - test OP-TEE"
tests: add OP-TEE test suite OP-TEE can get supplied with a devicetree and will then insert its firmware node and reserved-memory sections into it. As this devicetree often is not the one supplied to a later loaded kernel, a previous commit added functionality to transfer these nodes onto that new devicetree. To make sure this functionality stays intact, also add a test for the transfer functionality. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-23 14:46:41 +00:00
#endif
tests: Introduce DT overlay tests This adds a bunch of unit tests for the "fdt apply" command. They've all been run successfully in the sandbox. However, as you still require an out-of-tree dtc with overlay support, this is disabled by default. Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-05 08:26:46 +00:00
#ifdef CONFIG_UT_OVERLAY
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\noverlay - device tree overlays"
test: Add test for new command pci_mps Adds a test for the new pci_mps command to ensure that it can set the Maximum Payload Size (MPS) of all devices to 256 bytes in the sandbox environment. Enables the pci_mps command in the sandbox environment so that this test can be run. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com>
2023-03-10 19:07:15 +00:00
#endif
#ifdef CONFIG_CMD_PCI_MPS
"\npci_mps - PCI Express Maximum Payload Size"
tests: Introduce DT overlay tests This adds a bunch of unit tests for the "fdt apply" command. They've all been run successfully in the sandbox. However, as you still require an out-of-tree dtc with overlay support, this is disabled by default. Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-05 08:26:46 +00:00
#endif
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nprint - printing things to the console"
"\nsetexpr - setexpr command"
test: Add the beginnings of some string tests There are quite a few string functions in U-Boot with no tests. Make a start by adding a test for strtoul(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-08 14:32:55 +00:00
#ifdef CONFIG_SANDBOX
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nstr - basic test of string functions"
test: Add the beginnings of some string tests There are quite a few string functions in U-Boot with no tests. Make a start by adding a test for strtoul(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-08 14:32:55 +00:00
#endif
cmd: Add a SEAMA image load command Add a command to load SEAMA (Seattle Image), a NAND flash on-flash storage format. This type of flash image is found in some D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L, DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79 (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This U-Boot command will read and decode a SEAMA image from raw NAND flash on any platform. As it is always using big endian format for the data decoding is always necessary on platforms such as ARM. The command is needed to read a SEAMA-encoded boot image on the D-Link DIR-890L router for boot from NAND flash in an upcoming port of U-Boot to the Broadcom Northstar (BCM4709, BCM53xx) architecture. A basic test and documentation is added as well. The test must be run on a target with NAND flash support and at least one resident SEAMA image in flash. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-01-31 23:16:13 +00:00
#ifdef CONFIG_CMD_SEAMA
"\nseama - seama command parameters loading and decoding"
#endif
test: dm: Move the time test over to the ut command Unify the command for running unit tests further by moving the "ut_time" command over to "ut time". Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-20 19:27:30 +00:00
#ifdef CONFIG_UT_TIME
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\ntime - very basic test of time functions"
test: compression: Convert to unit test framework Adjust this test to use the unit test framework. Drop the two existing commands for running the tests and replace them with a single 'ut compression' command, with sub-commands. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Continue to have ret = run_test_internal(...) in run_test so ret is always initialized] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-25 18:57:33 +00:00
#endif
test: unit tests for Unicode functions Provide unit tests for Unicode functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-31 19:31:28 +00:00
#if defined(CONFIG_UT_UNICODE) && \
!defined(CONFIG_SPL_BUILD) && !defined(API_BUILD)
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
"\nunicode - Unicode functions"
test: dm: Move the dm tests over to the ut command Unify the command for running unit tests further by moving the "dm test" command over to "ut dm". Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:29 +00:00
#endif
test: Tidy up help for ut command Sort this and put the command summary at the top instead of the bottom. Adjust it so that the newlines are at the start of the strings, so that there is not a blank line at the end. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-30 01:47:10 +00:00
;
test: unit tests for Unicode functions Provide unit tests for Unicode functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-08-31 19:31:28 +00:00
#endif /* CONFIG_SYS_LONGHELP */
test: Add a common unit test command Add a command that all other unit tests should be a sub-command of. Also include a command that will run all tests. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-05-20 19:27:28 +00:00
U_BOOT_CMD(
ut, CONFIG_SYS_MAXARGS, 1, do_ut,
"unit tests", ut_help_text
);
Reference in a new issue Copy permalink