mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-10-26 16:03:31 +00:00
51 lines
2 KiB
Text
51 lines
2 KiB
Text
|
Intel Interrupt Router Device Binding
|
||
|
=====================================
|
||
|
|
||
|
The device tree node which describes the operation of the Intel Interrupt Router
|
||
|
device is as follows:
|
||
|
|
||
|
Required properties :
|
||
|
- reg : Specifies the interrupt router's PCI configuration space address as
|
||
|
defined by the Open Firmware spec.
|
||
|
- compatible = "intel,irq-router"
|
||
|
- intel,pirq-config : Specifies the IRQ routing register programming mechanism.
|
||
|
Valid values are:
|
||
|
"pci": IRQ routing is controlled by PCI configuration registers
|
||
|
"ibase": IRQ routing is in the memory-mapped IBASE register block
|
||
|
- intel,ibase-offset : IBASE register offset in the interrupt router's PCI
|
||
|
configuration space, required only if intel,pirq-config = "ibase".
|
||
|
- intel,pirq-link : Specifies the PIRQ link information with two cells. The
|
||
|
first cell is the register offset that controls the first PIRQ link routing.
|
||
|
The second cell is the total number of PIRQ links the router supports.
|
||
|
- intel,pirq-mask : Specifies the IRQ mask reprenting the 16 IRQs in 8259 PIC.
|
||
|
Bit N is 1 means IRQ N is available to be routed.
|
||
|
- intel,pirq-routing : Specifies all PCI devices' IRQ routing information,
|
||
|
encoded as 3 cells a group for a device. The first cell is the device's PCI
|
||
|
bus number, device number and function number encoding with PCI_BDF() macro.
|
||
|
The second cell is the PCI interrupt pin used by this device. The last cell
|
||
|
is which PIRQ line the PCI interrupt pin is routed to.
|
||
|
|
||
|
|
||
|
Example
|
||
|
-------
|
||
|
|
||
|
#include <dt-bindings/interrupt-router/intel-irq.h>
|
||
|
|
||
|
irq-router@1f,0 {
|
||
|
reg = <0x0000f800 0 0 0 0>;
|
||
|
compatible = "intel,irq-router";
|
||
|
intel,pirq-config = "pci";
|
||
|
intel,pirq-link = <0x60 8>;
|
||
|
intel,pirq-mask = <0xdef8>;
|
||
|
intel,pirq-routing = <
|
||
|
PCI_BDF(0, 2, 0) INTA PIRQA
|
||
|
PCI_BDF(0, 3, 0) INTA PIRQB
|
||
|
PCI_BDF(0, 8, 0) INTA PIRQC
|
||
|
PCI_BDF(0, 8, 1) INTB PIRQD
|
||
|
PCI_BDF(1, 6, 0) INTA PIRQE
|
||
|
PCI_BDF(1, 6, 1) INTB PIRQF
|
||
|
PCI_BDF(1, 6, 2) INTC PIRQG
|
||
|
PCI_BDF(1, 6, 3) INTD PIRQH
|
||
|
>;
|
||
|
};
|