u-boot/arch/arm/dts/ac5-98dx35xx-rd.dts

129 lines
2.6 KiB
Text
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree For RD-AC5X.
*
* Copyright (C) 2021 Marvell
* Copyright (C) 2022 Allied Telesis Labs
*/
/*
* Device Tree file for Marvell Alleycat 5X development board
* This board file supports the B configuration of the board
*/
/dts-v1/;
#include "ac5-98dx35xx.dtsi"
/ {
model = "Marvell RD-AC5X Board";
compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5";
aliases {
serial0 = &uart0;
spiflash0 = &spiflash0;
gpio0 = &gpio0;
gpio1 = &gpio1;
ethernet0 = &eth0;
ethernet1 = &eth1;
spi0 = &spi0;
i2c0 = &i2c0;
i2c1 = &i2c1;
usb0 = &usb0;
usb1 = &usb1;
pinctrl0 = &pinctrl0;
};
usb1phy: usb-phy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart0 {
status = "okay";
};
&mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&eth0 {
status = "okay";
phy-handle = <&phy0>;
};
/* USB0 is a host USB */
&usb0 {
status = "okay";
};
/* USB1 is a peripheral USB */
&usb1 {
status = "okay";
phys = <&usb1phy>;
phy-names = "usb-phy";
dr_mode = "peripheral";
};
&spi0 {
status = "okay";
spiflash0: flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
};
};
&pinctrl0 {
/*
* MPP Bus: MPP# mode#
* eMMC [0-11] 0x1
* SPI[0] [12-17] 0x1
* TSEN_INT [18] 0x1
* DEV_INIT [19] 0x1
* SPI[1] [20-23] 0x3
* UART[1] [24-25] 0x3
* I2C[0] [26-27] 0x1
* XSMI[0] [28-29] 0x1 // SCH use SMI[0], reversed due to CPSS problem
* SMI[1] [30-31] 0x2 // SCH use XSMI[1], reversed due to CPSS problem
* UART[0] [32-33] 0x1
* OOB_SMI [34-35] 0x1
* PTP_CLK0_OUT [36] 0x1
* PTP_PULSE_OUT [37] 0x1
* RCVR_CLK_OUT [38] 0x1
* GPIO(in/out) [39] 0x0
* GPIO(in/out) [40] 0x0
* PTP_REF_CLK [41] 0x1
* PTP_CLK0 [42] 0x1
* LED0_CLK [43] 0x1
* LED0_STB [44] 0x1
* LED0_DATA [45] 0x1
*/
/* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1
3 3 3 3 3 3 1 1 1 1
2 2 1 1 1 1 1 1 1 0
0 1 1 1 1 1 >;
};