Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-13 16:37:30 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/dts/Kconfig

110 lines
3.8 KiB
Text
Raw Normal View History

kconfig: move CONFIG_OF_* to Kconfig This commit moves: CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_OF_EMBED CONFIG_OF_HOSTFILE Because these options are currently not supported for SPL, the "Device Tree Control" menu does not appear in the SPL configuration. Note: zynq-common.h should be adjusted so as not to change the default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2014-09-22 10:59:05 +00:00
#
# Device Tree Control
#
config SUPPORT_OF_CONTROL
bool
menu "Device Tree Control"
depends on SUPPORT_OF_CONTROL
config OF_CONTROL
bool "Run-time configuration via Device Tree"
help
This feature provides for run-time configuration of U-Boot
via a flattened device tree.
of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL As we discussed a couple of times, negative CONFIG options make our life difficult; CONFIG_SYS_NO_FLASH, CONFIG_SYS_DCACHE_OFF, ... and here is another one. Now, there are three boards enabling OF_CONTROL on SPL: - socfpga_arria5_defconfig - socfpga_cyclone5_defconfig - socfpga_socrates_defconfig This commit adds CONFIG_SPL_OF_CONTROL for them and deletes CONFIG_SPL_DISABLE_OF_CONTROL from the other boards to invert the logic. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-11 22:31:54 +00:00
config SPL_OF_CONTROL
bool "Enable run-time configuration via Device Tree in SPL"
depends on SPL && OF_CONTROL
fdt: Add an option to disable device tree in SPL Some boards cannot support device tree due to lack of memory. Add an option to allow these boards to continue to work (and even use driver model). This is a 'negative' option since most boards are expected to support device tree in SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-02-28 05:06:38 +00:00
help
Some boards use device tree in U-Boot but only have 4KB of SRAM
which is not enough to support device tree. Enable this option to
allow such boards to be supported by U-Boot SPL.
kconfig: move CONFIG_OF_* to Kconfig This commit moves: CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_OF_EMBED CONFIG_OF_HOSTFILE Because these options are currently not supported for SPL, the "Device Tree Control" menu does not appear in the SPL configuration. Note: zynq-common.h should be adjusted so as not to change the default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2014-09-22 10:59:05 +00:00
choice
prompt "Provider of DTB for DT control"
depends on OF_CONTROL
config OF_SEPARATE
bool "Separate DTB for DT control"
depends on !SANDBOX
help
If this option is enabled, the device tree will be built and
placed as a separate u-boot.dtb file alongside the U-Boot image.
config OF_EMBED
bool "Embedded DTB for DT control"
help
If this option is enabled, the device tree will be picked up and
dts: Add a comment about CONFIG_OF_EMBED being for local use This comment from README.fdt-control did not end up in the Kconfig, which is what most people will see. Add it with a few tweaks. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2015-09-01 00:47:52 +00:00
built into the U-Boot image. This is suitable for local debugging
and development only and is not recommended for production devices.
Boards in the mainline U-Boot tree should not use it.
kconfig: move CONFIG_OF_* to Kconfig This commit moves: CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_OF_EMBED CONFIG_OF_HOSTFILE Because these options are currently not supported for SPL, the "Device Tree Control" menu does not appear in the SPL configuration. Note: zynq-common.h should be adjusted so as not to change the default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2014-09-22 10:59:05 +00:00
config OF_HOSTFILE
bool "Host filed DTB for DT control"
depends on SANDBOX
help
If this option is enabled, DTB will be read from a file on startup.
This is only useful for Sandbox. Use the -d flag to U-Boot to
specify the file to read.
endchoice
kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig This option specifies the default Device Tree used for the run-time configuration of U-Boot. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Michal Simek <michal.simek@xilinx.com>
2014-09-22 10:59:06 +00:00
config DEFAULT_DEVICE_TREE
string "Default Device Tree for DT control"
fdt: Adjust DEFAULT_DEVICE_TREE to device on OF_CONTROL This option has no meaning without OF_CONTROL, so add a dependency. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:44 +00:00
depends on OF_CONTROL
kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig This option specifies the default Device Tree used for the run-time configuration of U-Boot. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Michal Simek <michal.simek@xilinx.com>
2014-09-22 10:59:06 +00:00
help
This option specifies the default Device Tree used for DT control.
Correct two non-functional misspellings "overrided". Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2014-10-21 20:44:32 +00:00
It can be overridden from the command line:
kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig This option specifies the default Device Tree used for the run-time configuration of U-Boot. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Michal Simek <michal.simek@xilinx.com>
2014-09-22 10:59:06 +00:00
$ make DEVICE_TREE=<device-tree-name>
spl: Add a way to specify a list of device trees to include When building a FIT, more than one device tree can be included. The board can select (at run-time) the one that it wants. Add a Kconfig option to allow the list of devices trees (supported by the board) to be specified. When using SPL_LOAD_FIT, build u-boot.img in FIT format instead of the legacy image format. Include all the listed device tree files in this FIT. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:57 +00:00
config OF_LIST
string "List of device tree files to include for DT control"
depends on SPL_LOAD_FIT
spl: Setup default value for OF_LIST OF_LIST can't remain empty that's why setup it up to default DTB. If it is empty u-boot.img is created without FDT partition: For example: ./tools/mkimage -f auto -A arm -T firmware -C none -O u-boot -a 0x8000000 -e 0 -n "U-Boot 2016.05-rc3 ..." -E -b -d u-boot-nodtb.bin u-boot.img Can't set 'timestamp' property for '' node (FDT_ERR_NOSPACE) FIT description: Firmware image with one or more FDT blobs Created: Wed May 4 15:02:52 2016 Image 0 (firmware@1) Description: U-Boot 2016.05-rc3-00080-gff2e12ae22a8-dirty for zynqmp board Created: Wed May 4 15:02:52 2016 Type: Firmware Compression: uncompressed Data Size: unavailable Architecture: ARM Load Address: 0x08000000 Default Configuration: 'conf@1' Configuration 0 (conf@1) Description: unavailable Kernel: unavailable And then image like this doesn't contain description and link to FDT and can't boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-04 13:14:11 +00:00
default DEFAULT_DEVICE_TREE
spl: Add a way to specify a list of device trees to include When building a FIT, more than one device tree can be included. The board can select (at run-time) the one that it wants. Add a Kconfig option to allow the list of devices trees (supported by the board) to be specified. When using SPL_LOAD_FIT, build u-boot.img in FIT format instead of the legacy image format. Include all the listed device tree files in this FIT. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:57 +00:00
help
This option specifies a list of device tree files to use for DT
control. These will be packaged into a FIT. At run-time, SPL will
select the correct DT to use by examining the hardware (e.g.
reading a board ID value). This is a list of device tree files
(without the directory or .dtb suffix) separated by <space>.
dm: Reduce SPL device tree size The SPL device tree size must be minimised to save memory. Only include properties that are needed by SPL - this is determined by the presence of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of unused properties from the nodes that remain. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:29 +00:00
config OF_SPL_REMOVE_PROPS
string "List of device tree properties to drop for SPL"
dts: fix dependency of OF_SPL_REMOVE_PROPS This should depend on SPL_OF_CONTROL (it is not equivalent to SPL && OF_CONTROL). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-28 11:28:42 +00:00
depends on SPL_OF_CONTROL
dts: keep clock-names and clocks in SPL DTB if SPL_CLK is enabled These two properties are necessary for SPL to get clocks from DT. Note: For now, only clock look-up by index is supported (clk_get_by_index() function), so "clock-names" is never parsed in U-Boot. However, we may want to support something like clk_get_by_name() in the future, so let's keep "clock-names" as well as "clocks". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-03 11:51:36 +00:00
default "interrupt-parent" if SPL_PINCTRL_FULL && SPL_CLK
dts: do not cut down pinctrl-0 and pinctrl-names for SPL full-pinctrl These properties are necessary to use full-featured pinctrl drivers in SPL. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-08-31 10:36:24 +00:00
default "clocks clock-names interrupt-parent" if SPL_PINCTRL_FULL
dts: keep clock-names and clocks in SPL DTB if SPL_CLK is enabled These two properties are necessary for SPL to get clocks from DT. Note: For now, only clock look-up by index is supported (clk_get_by_index() function), so "clock-names" is never parsed in U-Boot. However, we may want to support something like clk_get_by_name() in the future, so let's keep "clock-names" as well as "clocks". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-02-03 11:51:36 +00:00
default "pinctrl-0 pinctrl-names interrupt-parent" if SPL_CLK
dm: Reduce SPL device tree size The SPL device tree size must be minimised to save memory. Only include properties that are needed by SPL - this is determined by the presence of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of unused properties from the nodes that remain. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:29 +00:00
default "pinctrl-0 pinctrl-names clocks clock-names interrupt-parent"
help
Since SPL normally runs in a reduced memory space, the device tree
is cut down to only what is needed to load and start U-Boot. Only
nodes marked with the property "u-boot,dm-pre-reloc" will be
included. In addition, some properties are not used by U-Boot and
can be discarded. This option defines the list of properties to
discard.
dm: Add an option to enable the of-platdata feature Add a Kconfig option to enable this feature. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-04 17:58:06 +00:00
config SPL_OF_PLATDATA
bool "Generate platform data for use in SPL"
depends on SPL_OF_CONTROL
help
For very constrained SPL environments the overhead of decoding
device tree nodes and converting their contents into platform data
is too large. This overhead includes libfdt code as well as the
device tree contents itself. The latter is fairly compact, but the
former can add 3KB or more to a Thumb 2 Image.
This option enables generation of platform data from the device
tree as C code. This code creates devices using U_BOOT_DEVICE()
declarations. The benefit is that it allows driver code to access
the platform data directly in C structures, avoidin the libfdt
overhead.
This option works by generating C structure declarations for each
compatible string, then adding platform data and U_BOOT_DEVICE
declarations for each node. See README.platdata for more
information.
kconfig: move CONFIG_OF_* to Kconfig This commit moves: CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_OF_EMBED CONFIG_OF_HOSTFILE Because these options are currently not supported for SPL, the "Device Tree Control" menu does not appear in the SPL configuration. Note: zynq-common.h should be adjusted so as not to change the default value of CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2014-09-22 10:59:05 +00:00
endmenu
Reference in a new issue Copy permalink