u-boot/drivers/net/mv88e6xxx.c

756 lines
20 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2022
* Gateworks Corporation <www.gateworks.com>
* Tim Harvey <tharvey@gateworks.com>
*
* (C) Copyright 2015
* Elecsys Corporation <www.elecsyscorp.com>
* Kevin Smith <kevin.smith@elecsyscorp.com>
*
* Original driver:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Prafulla Wadaskar <prafulla@marvell.com>
*/
/*
* DSA driver for mv88e6xxx ethernet switches.
*
* This driver configures the mv88e6xxx for basic use as a DSA switch.
*
* This driver was adapted from drivers/net/phy/mv88e61xx and tested
* on the mv88e6176 via an SGMII interface.
*/
#include <common.h>
#include <dm/device.h>
#include <dm/device_compat.h>
#include <dm/device-internal.h>
#include <dm/lists.h>
#include <dm/of_extra.h>
#include <linux/delay.h>
#include <miiphy.h>
#include <net/dsa.h>
/* Device addresses */
#define DEVADDR_PHY(p) (p)
#define DEVADDR_SERDES 0x0F
/* SMI indirection registers for multichip addressing mode */
#define SMI_CMD_REG 0x00
#define SMI_DATA_REG 0x01
/* Global registers */
#define GLOBAL1_STATUS 0x00
#define GLOBAL1_CTRL 0x04
/* Global 2 registers */
#define GLOBAL2_REG_PHY_CMD 0x18
#define GLOBAL2_REG_PHY_DATA 0x19
#define GLOBAL2_REG_SCRATCH 0x1A
/* Port registers */
#define PORT_REG_STATUS 0x00
#define PORT_REG_PHYS_CTRL 0x01
#define PORT_REG_SWITCH_ID 0x03
#define PORT_REG_CTRL 0x04
/* Phy registers */
#define PHY_REG_PAGE 0x16
/* Phy page numbers */
#define PHY_PAGE_COPPER 0
#define PHY_PAGE_SERDES 1
/* Register fields */
#define GLOBAL1_CTRL_SWRESET BIT(15)
#define PORT_REG_STATUS_SPEED_SHIFT 8
#define PORT_REG_STATUS_SPEED_10 0
#define PORT_REG_STATUS_SPEED_100 1
#define PORT_REG_STATUS_SPEED_1000 2
#define PORT_REG_STATUS_CMODE_MASK 0xF
#define PORT_REG_STATUS_CMODE_SGMII 0xa
#define PORT_REG_STATUS_CMODE_1000BASE_X 0x9
#define PORT_REG_STATUS_CMODE_100BASE_X 0x8
#define PORT_REG_STATUS_CMODE_RGMII 0x7
#define PORT_REG_STATUS_CMODE_RMII 0x5
#define PORT_REG_STATUS_CMODE_RMII_PHY 0x4
#define PORT_REG_STATUS_CMODE_GMII 0x3
#define PORT_REG_STATUS_CMODE_MII 0x2
#define PORT_REG_STATUS_CMODE_MIIPHY 0x1
#define PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK BIT(15)
#define PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK BIT(14)
#define PORT_REG_PHYS_CTRL_PCS_AN_EN BIT(10)
#define PORT_REG_PHYS_CTRL_PCS_AN_RST BIT(9)
#define PORT_REG_PHYS_CTRL_FC_VALUE BIT(7)
#define PORT_REG_PHYS_CTRL_FC_FORCE BIT(6)
#define PORT_REG_PHYS_CTRL_LINK_VALUE BIT(5)
#define PORT_REG_PHYS_CTRL_LINK_FORCE BIT(4)
#define PORT_REG_PHYS_CTRL_DUPLEX_VALUE BIT(3)
#define PORT_REG_PHYS_CTRL_DUPLEX_FORCE BIT(2)
#define PORT_REG_PHYS_CTRL_SPD1000 BIT(1)
#define PORT_REG_PHYS_CTRL_SPD100 BIT(0)
#define PORT_REG_PHYS_CTRL_SPD_MASK (BIT(1) | BIT(0))
#define PORT_REG_CTRL_PSTATE_SHIFT 0
#define PORT_REG_CTRL_PSTATE_MASK 3
/* Field values */
#define PORT_REG_CTRL_PSTATE_DISABLED 0
#define PORT_REG_CTRL_PSTATE_FORWARD 3
/*
* Macros for building commands for indirect addressing modes. These are valid
* for both the indirect multichip addressing mode and the PHY indirection
* required for the writes to any PHY register.
*/
#define SMI_BUSY BIT(15)
#define SMI_CMD_CLAUSE_22 BIT(12)
#define SMI_CMD_CLAUSE_22_OP_READ (2 << 10)
#define SMI_CMD_CLAUSE_22_OP_WRITE (1 << 10)
#define SMI_CMD_ADDR_SHIFT 5
#define SMI_CMD_ADDR_MASK 0x1f
#define SMI_CMD_REG_SHIFT 0
#define SMI_CMD_REG_MASK 0x1f
#define SMI_CMD_READ(addr, reg) \
(SMI_BUSY | SMI_CMD_CLAUSE_22 | SMI_CMD_CLAUSE_22_OP_READ) | \
(((addr) & SMI_CMD_ADDR_MASK) << SMI_CMD_ADDR_SHIFT) | \
(((reg) & SMI_CMD_REG_MASK) << SMI_CMD_REG_SHIFT)
#define SMI_CMD_WRITE(addr, reg) \
(SMI_BUSY | SMI_CMD_CLAUSE_22 | SMI_CMD_CLAUSE_22_OP_WRITE) | \
(((addr) & SMI_CMD_ADDR_MASK) << SMI_CMD_ADDR_SHIFT) | \
(((reg) & SMI_CMD_REG_MASK) << SMI_CMD_REG_SHIFT)
/* ID register values for different switch models */
#define PORT_SWITCH_ID_6020 0x0200
#define PORT_SWITCH_ID_6070 0x0700
#define PORT_SWITCH_ID_6071 0x0710
#define PORT_SWITCH_ID_6096 0x0980
#define PORT_SWITCH_ID_6097 0x0990
#define PORT_SWITCH_ID_6172 0x1720
#define PORT_SWITCH_ID_6176 0x1760
#define PORT_SWITCH_ID_6220 0x2200
#define PORT_SWITCH_ID_6240 0x2400
#define PORT_SWITCH_ID_6250 0x2500
#define PORT_SWITCH_ID_6320 0x1150
#define PORT_SWITCH_ID_6352 0x3520
struct mv88e6xxx_priv {
int smi_addr;
int id;
int port_count; /* Number of switch ports */
int port_reg_base; /* Base of the switch port registers */
u8 global1; /* Offset of Switch Global 1 registers */
u8 global2; /* Offset of Switch Global 2 registers */
};
/* Wait for the current SMI indirect command to complete */
static int mv88e6xxx_smi_wait(struct udevice *dev, int smi_addr)
{
int val;
u32 timeout = 100;
do {
val = dm_mdio_read(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG);
if (val >= 0 && (val & SMI_BUSY) == 0)
return 0;
mdelay(1);
} while (--timeout);
dev_err(dev, "SMI busy timeout\n");
return -ETIMEDOUT;
}
/*
* The mv88e6xxx has three types of addresses: the smi bus address, the device
* address, and the register address. The smi bus address distinguishes it on
* the smi bus from other PHYs or switches. The device address determines
* which on-chip register set you are reading/writing (the various PHYs, their
* associated ports, or global configuration registers). The register address
* is the offset of the register you are reading/writing.
*
* When the mv88e6xxx is hardware configured to have address zero, it behaves in
* single-chip addressing mode, where it responds to all SMI addresses, using
* the smi address as its device address. This obviously only works when this
* is the only chip on the SMI bus. This allows the driver to access device
* registers without using indirection. When the chip is configured to a
* non-zero address, it only responds to that SMI address and requires indirect
* writes to access the different device addresses.
*/
static int mv88e6xxx_reg_read(struct udevice *dev, int addr, int reg)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int smi_addr = priv->smi_addr;
int res;
/* In single-chip mode, the device can be addressed directly */
if (smi_addr == 0)
return dm_mdio_read(dev->parent, addr, MDIO_DEVAD_NONE, reg);
/* Wait for the bus to become free */
res = mv88e6xxx_smi_wait(dev, smi_addr);
if (res < 0)
return res;
/* Issue the read command */
res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG,
SMI_CMD_READ(addr, reg));
if (res < 0)
return res;
/* Wait for the read command to complete */
res = mv88e6xxx_smi_wait(dev, smi_addr);
if (res < 0)
return res;
/* Read the data */
res = dm_mdio_read(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_DATA_REG);
if (res < 0)
return res;
return res & 0xffff;
}
/* See the comment above mv88e6xxx_reg_read */
static int mv88e6xxx_reg_write(struct udevice *dev, int addr, int reg, u16 val)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int smi_addr = priv->smi_addr;
int res;
/* In single-chip mode, the device can be addressed directly */
if (smi_addr == 0)
return dm_mdio_write(dev->parent, addr, MDIO_DEVAD_NONE, reg, val);
/* Wait for the bus to become free */
res = mv88e6xxx_smi_wait(dev, smi_addr);
if (res < 0)
return res;
/* Set the data to write */
res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE,
SMI_DATA_REG, val);
if (res < 0)
return res;
/* Issue the write command */
res = dm_mdio_write(dev->parent, smi_addr, MDIO_DEVAD_NONE, SMI_CMD_REG,
SMI_CMD_WRITE(addr, reg));
if (res < 0)
return res;
/* Wait for the write command to complete */
res = mv88e6xxx_smi_wait(dev, smi_addr);
if (res < 0)
return res;
return 0;
}
static int mv88e6xxx_phy_wait(struct udevice *dev)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int val;
u32 timeout = 100;
do {
val = mv88e6xxx_reg_read(dev, priv->global2, GLOBAL2_REG_PHY_CMD);
if (val >= 0 && (val & SMI_BUSY) == 0)
return 0;
mdelay(1);
} while (--timeout);
return -ETIMEDOUT;
}
static int mv88e6xxx_phy_read_indirect(struct udevice *dev, int phyad, int devad, int reg)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int res;
/* Issue command to read */
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_CMD,
SMI_CMD_READ(phyad, reg));
/* Wait for data to be read */
res = mv88e6xxx_phy_wait(dev);
if (res < 0)
return res;
/* Read retrieved data */
return mv88e6xxx_reg_read(dev, priv->global2,
GLOBAL2_REG_PHY_DATA);
}
static int mv88e6xxx_phy_write_indirect(struct udevice *dev, int phyad,
int devad, int reg, u16 data)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int res;
/* Set the data to write */
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_DATA, data);
if (res < 0)
return res;
/* Issue the write command */
res = mv88e6xxx_reg_write(dev, priv->global2,
GLOBAL2_REG_PHY_CMD,
SMI_CMD_WRITE(phyad, reg));
if (res < 0)
return res;
/* Wait for command to complete */
return mv88e6xxx_phy_wait(dev);
}
/* Wrapper function to make calls to phy_read_indirect simpler */
static int mv88e6xxx_phy_read(struct udevice *dev, int phy, int reg)
{
return mv88e6xxx_phy_read_indirect(dev, DEVADDR_PHY(phy),
MDIO_DEVAD_NONE, reg);
}
/* Wrapper function to make calls to phy_write_indirect simpler */
static int mv88e6xxx_phy_write(struct udevice *dev, int phy, int reg, u16 val)
{
return mv88e6xxx_phy_write_indirect(dev, DEVADDR_PHY(phy),
MDIO_DEVAD_NONE, reg, val);
}
static int mv88e6xxx_port_read(struct udevice *dev, u8 port, u8 reg)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
return mv88e6xxx_reg_read(dev, priv->port_reg_base + port, reg);
}
static int mv88e6xxx_port_write(struct udevice *dev, u8 port, u8 reg, u16 val)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
return mv88e6xxx_reg_write(dev, priv->port_reg_base + port, reg, val);
}
static int mv88e6xxx_set_page(struct udevice *dev, u8 phy, u8 page)
{
return mv88e6xxx_phy_write(dev, phy, PHY_REG_PAGE, page);
}
static int mv88e6xxx_get_switch_id(struct udevice *dev)
{
int res;
res = mv88e6xxx_port_read(dev, 0, PORT_REG_SWITCH_ID);
if (res < 0) {
dev_err(dev, "Failed to read switch ID: %d\n", res);
return res;
}
return res & 0xfff0;
}
static bool mv88e6xxx_6352_family(struct udevice *dev)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
switch (priv->id) {
case PORT_SWITCH_ID_6172:
case PORT_SWITCH_ID_6176:
case PORT_SWITCH_ID_6240:
case PORT_SWITCH_ID_6352:
return true;
}
return false;
}
static int mv88e6xxx_get_cmode(struct udevice *dev, u8 port)
{
int res;
res = mv88e6xxx_port_read(dev, port, PORT_REG_STATUS);
if (res < 0)
return res;
return res & PORT_REG_STATUS_CMODE_MASK;
}
static int mv88e6xxx_switch_reset(struct udevice *dev)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int time_ms;
int val;
u8 port;
/* Disable all ports */
for (port = 0; port < priv->port_count; port++) {
val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL);
if (val < 0)
return val;
val &= ~(PORT_REG_CTRL_PSTATE_MASK << PORT_REG_CTRL_PSTATE_SHIFT);
val |= (PORT_REG_CTRL_PSTATE_DISABLED << PORT_REG_CTRL_PSTATE_SHIFT);
val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val);
if (val < 0)
return val;
}
/* Wait 2 ms for queues to drain */
udelay(2000);
/* Reset switch */
val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_CTRL);
if (val < 0)
return val;
val |= GLOBAL1_CTRL_SWRESET;
val = mv88e6xxx_reg_write(dev, priv->global1, GLOBAL1_CTRL, val);
if (val < 0)
return val;
/* Wait up to 1 second for switch to reset complete */
for (time_ms = 1000; time_ms; time_ms--) {
val = mv88e6xxx_reg_read(dev, priv->global1, GLOBAL1_CTRL);
if (val >= 0 && ((val & GLOBAL1_CTRL_SWRESET) == 0))
break;
udelay(1000);
}
if (!time_ms)
return -ETIMEDOUT;
return 0;
}
static int mv88e6xxx_serdes_init(struct udevice *dev)
{
int val;
val = mv88e6xxx_set_page(dev, DEVADDR_SERDES, PHY_PAGE_SERDES);
if (val < 0)
return val;
/* Power up serdes module */
val = mv88e6xxx_phy_read(dev, DEVADDR_SERDES, MII_BMCR);
if (val < 0)
return val;
val &= ~(BMCR_PDOWN);
val = mv88e6xxx_phy_write(dev, DEVADDR_SERDES, MII_BMCR, val);
if (val < 0)
return val;
return 0;
}
/*
* This function is used to pre-configure the required register
* offsets, so that the indirect register access to the PHY registers
* is possible. This is necessary to be able to read the PHY ID
* while driver probing or in get_phy_id(). The globalN register
* offsets must be initialized correctly for a detected switch,
* otherwise detection of the PHY ID won't work!
*/
static int mv88e6xxx_priv_reg_offs_pre_init(struct udevice *dev)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
/*
* Initial 'port_reg_base' value must be an offset of existing
* port register, then reading the ID should succeed. First, try
* to read via port registers with device address 0x10 (88E6096
* and compatible switches).
*/
priv->port_reg_base = 0x10;
priv->id = mv88e6xxx_get_switch_id(dev);
if (priv->id != 0xfff0) {
priv->global1 = 0x1B;
priv->global2 = 0x1C;
return 0;
}
/*
* Now try via port registers with device address 0x08
* (88E6020 and compatible switches).
*/
priv->port_reg_base = 0x08;
priv->id = mv88e6xxx_get_switch_id(dev);
if (priv->id != 0xfff0) {
priv->global1 = 0x0F;
priv->global2 = 0x07;
return 0;
}
dev_warn(dev, "%s Unknown ID 0x%x\n", __func__, priv->id);
return -ENODEV;
}
static int mv88e6xxx_mdio_read(struct udevice *dev, int addr, int devad, int reg)
{
return mv88e6xxx_phy_read_indirect(dev->parent, DEVADDR_PHY(addr),
MDIO_DEVAD_NONE, reg);
}
static int mv88e6xxx_mdio_write(struct udevice *dev, int addr, int devad,
int reg, u16 val)
{
return mv88e6xxx_phy_write_indirect(dev->parent, DEVADDR_PHY(addr),
MDIO_DEVAD_NONE, reg, val);
}
static const struct mdio_ops mv88e6xxx_mdio_ops = {
.read = mv88e6xxx_mdio_read,
.write = mv88e6xxx_mdio_write,
};
static int mv88e6xxx_mdio_bind(struct udevice *dev)
{
char name[32];
static int num_devices;
sprintf(name, "mv88e6xxx-mdio-%d", num_devices++);
device_set_name(dev, name);
return 0;
}
U_BOOT_DRIVER(mv88e6xxx_mdio) = {
.name = "mv88e6xxx_mdio",
.id = UCLASS_MDIO,
.ops = &mv88e6xxx_mdio_ops,
.bind = mv88e6xxx_mdio_bind,
.plat_auto = sizeof(struct mdio_perdev_priv),
};
static int mv88e6xxx_port_probe(struct udevice *dev, int port, struct phy_device *phy)
{
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int supported;
switch (priv->id) {
case PORT_SWITCH_ID_6020:
case PORT_SWITCH_ID_6070:
case PORT_SWITCH_ID_6071:
supported = PHY_BASIC_FEATURES | SUPPORTED_MII;
break;
default:
supported = PHY_GBIT_FEATURES;
break;
}
phy->supported &= supported;
phy->advertising &= supported;
return phy_config(phy);
}
static int mv88e6xxx_port_enable(struct udevice *dev, int port, struct phy_device *phy)
{
int val, ret;
dev_dbg(dev, "%s P%d phy:0x%08x %s\n", __func__, port,
phy->phy_id, phy_string_for_interface(phy->interface));
if (phy->phy_id == PHY_FIXED_ID) {
/* Physical Control register: Table 62 */
val = mv88e6xxx_port_read(dev, port, PORT_REG_PHYS_CTRL);
/* configure RGMII delays for fixed link */
switch (phy->interface) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
dev_dbg(dev, "configure internal RGMII delays\n");
/* RGMII delays */
val &= ~(PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK ||
PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK);
if (phy->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phy->interface == PHY_INTERFACE_MODE_RGMII_RXID)
val |= PORT_REG_PHYS_CTRL_RGMII_DELAY_RXCLK;
if (phy->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phy->interface == PHY_INTERFACE_MODE_RGMII_TXID)
val |= PORT_REG_PHYS_CTRL_RGMII_DELAY_TXCLK;
break;
default:
break;
}
/* Force Link */
val |= PORT_REG_PHYS_CTRL_LINK_VALUE |
PORT_REG_PHYS_CTRL_LINK_FORCE;
ret = mv88e6xxx_port_write(dev, port, PORT_REG_PHYS_CTRL, val);
if (ret < 0)
return ret;
if (mv88e6xxx_6352_family(dev)) {
/* validate interface type */
dev_dbg(dev, "validate interface type\n");
val = mv88e6xxx_get_cmode(dev, port);
if (val < 0)
return val;
switch (phy->interface) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_ID:
if (val != PORT_REG_STATUS_CMODE_RGMII)
goto mismatch;
break;
case PHY_INTERFACE_MODE_1000BASEX:
if (val != PORT_REG_STATUS_CMODE_1000BASE_X)
goto mismatch;
break;
mismatch:
default:
dev_err(dev, "Mismatched PHY mode %s on port %d!\n",
phy_string_for_interface(phy->interface), port);
break;
}
}
}
/* enable port */
val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL);
if (val < 0)
return val;
val &= ~(PORT_REG_CTRL_PSTATE_MASK << PORT_REG_CTRL_PSTATE_SHIFT);
val |= (PORT_REG_CTRL_PSTATE_FORWARD << PORT_REG_CTRL_PSTATE_SHIFT);
val = mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val);
if (val < 0)
return val;
return phy_startup(phy);
}
static void mv88e6xxx_port_disable(struct udevice *dev, int port, struct phy_device *phy)
{
int val;
dev_dbg(dev, "%s P%d phy:0x%08x %s\n", __func__, port,
phy->phy_id, phy_string_for_interface(phy->interface));
val = mv88e6xxx_port_read(dev, port, PORT_REG_CTRL);
val &= ~(PORT_REG_CTRL_PSTATE_MASK << PORT_REG_CTRL_PSTATE_SHIFT);
val |= (PORT_REG_CTRL_PSTATE_DISABLED << PORT_REG_CTRL_PSTATE_SHIFT);
mv88e6xxx_port_write(dev, port, PORT_REG_CTRL, val);
}
static const struct dsa_ops mv88e6xxx_dsa_ops = {
.port_probe = mv88e6xxx_port_probe,
.port_enable = mv88e6xxx_port_enable,
.port_disable = mv88e6xxx_port_disable,
};
/* bind and probe the switch mdios */
static int mv88e6xxx_probe_mdio(struct udevice *dev)
{
struct udevice *mdev;
const char *name;
ofnode node;
int ret;
/* bind phy ports of mdio child node to mv88e6xxx_mdio device */
node = dev_read_subnode(dev, "mdio");
if (!ofnode_valid(node))
return 0;
name = ofnode_get_name(node);
ret = device_bind_driver_to_node(dev,
"mv88e6xxx_mdio",
name, node, NULL);
if (ret) {
dev_err(dev, "failed to bind %s: %d\n", name, ret);
} else {
/* need to probe it as there is no compatible to do so */
ret = uclass_get_device_by_ofnode(UCLASS_MDIO, node, &mdev);
if (ret)
dev_err(dev, "failed to probe %s: %d\n", name, ret);
}
return ret;
}
static int mv88e6xxx_probe(struct udevice *dev)
{
struct dsa_pdata *dsa_pdata = dev_get_uclass_plat(dev);
struct mv88e6xxx_priv *priv = dev_get_priv(dev);
int val, ret;
if (ofnode_valid(dev_ofnode(dev)) &&
!ofnode_is_enabled(dev_ofnode(dev))) {
dev_dbg(dev, "switch disabled\n");
return -ENODEV;
}
/* probe internal mdio bus */
ret = mv88e6xxx_probe_mdio(dev);
if (ret)
return ret;
ret = mv88e6xxx_priv_reg_offs_pre_init(dev);
if (ret)
return ret;
dev_dbg(dev, "ID=0x%x PORT_BASE=0x%02x GLOBAL1=0x%02x GLOBAL2=0x%02x\n",
priv->id, priv->port_reg_base, priv->global1, priv->global2);
switch (priv->id) {
case PORT_SWITCH_ID_6096:
case PORT_SWITCH_ID_6097:
case PORT_SWITCH_ID_6172:
case PORT_SWITCH_ID_6176:
case PORT_SWITCH_ID_6240:
case PORT_SWITCH_ID_6352:
priv->port_count = 11;
break;
case PORT_SWITCH_ID_6020:
case PORT_SWITCH_ID_6070:
case PORT_SWITCH_ID_6071:
case PORT_SWITCH_ID_6220:
case PORT_SWITCH_ID_6250:
case PORT_SWITCH_ID_6320:
priv->port_count = 7;
break;
default:
return -ENODEV;
}
ret = mv88e6xxx_switch_reset(dev);
if (ret < 0)
return ret;
if (mv88e6xxx_6352_family(dev)) {
val = mv88e6xxx_get_cmode(dev, dsa_pdata->cpu_port);
if (val < 0)
return val;
/* initialize serdes */
if (val == PORT_REG_STATUS_CMODE_100BASE_X ||
val == PORT_REG_STATUS_CMODE_1000BASE_X ||
val == PORT_REG_STATUS_CMODE_SGMII) {
ret = mv88e6xxx_serdes_init(dev);
if (ret < 0)
return ret;
}
}
return 0;
}
static const struct udevice_id mv88e6xxx_ids[] = {
{ .compatible = "marvell,mv88e6085" },
{ }
};
U_BOOT_DRIVER(mv88e6xxx) = {
.name = "mv88e6xxx",
.id = UCLASS_DSA,
.of_match = mv88e6xxx_ids,
.probe = mv88e6xxx_probe,
.ops = &mv88e6xxx_dsa_ops,
.priv_auto = sizeof(struct mv88e6xxx_priv),
};