u-boot/include/configs/m53menlo.h

195 lines
4.8 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Menlosystems M53Menlo configuration
* Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
* Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
*/
#ifndef __M53MENLO_CONFIG_H__
#define __M53MENLO_CONFIG_H__
#include <asm/arch/imx-regs.h>
/*
* Memory configurations
*/
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
#define PHYS_SDRAM_2 CSD1_BASE_ADDR
#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
#define PHYS_SDRAM_SIZE (gd->ram_size)
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/*
* U-Boot general configurations
*/
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Boot argument buffer size */
/*
* Serial Driver
*/
#define CONFIG_MXC_UART_BASE UART1_BASE
/*
* MMC Driver
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
#endif
/*
* NAND
*/
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
#define CONFIG_SYS_NAND_LARGEPAGE
#define CONFIG_MXC_NAND_HWECC
/* Environment is in NAND */
#define CONFIG_ENV_RANGE (0x00080000) /* 512 KiB */
#endif
/*
* Ethernet on SOC (FEC)
*/
#ifdef CONFIG_CMD_NET
#define IMX_FEC_BASE FEC_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR 0x0
#define CONFIG_DISCOVER_PHY
#endif
#define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */
/*
* RTC
*/
#ifdef CONFIG_CMD_DATE
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
#endif
/*
* USB
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#endif
/*
* SATA
*/
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA_PORT_ID 0
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
#define CONFIG_LBA48
#endif
/*
* LCD
*/
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
/* LVDS display */
#define CONFIG_SYS_LDB_CLOCK 33260000
#define CONFIG_IMX_VIDEO_SKIP
/* IIM Fuses */
#define CONFIG_FSL_IIM
/* Watchdog */
/*
* NAND SPL
*/
#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
#define CONFIG_SPL_PAD_TO 0x8000
#define CONFIG_SPL_STACK 0x70004000
#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
/*
* Extra Environments
*/
#define CONFIG_HOSTNAME "m53menlo"
#define CONFIG_EXTRA_ENV_SETTINGS \
"consdev=ttymxc0\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
"mmcdev=0\0" \
"mmcpart=1\0" \
"rootpath=/srv/\0" \
"kernel_addr_r=0x72000000\0" \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"netdev=eth0\0" \
"splashsource=mmc_fs\0" \
"splashfile=boot/usplash.bmp.gz\0" \
"splashimage=0x88000000\0" \
"splashpos=m,m\0" \
"altbootcmd=" \
"if test ${mmcpart} -eq 1 ; then " \
"setenv mmcpart 2 ; " \
"else " \
"setenv mmcpart 1 ; " \
"fi ; " \
"boot\0" \
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0" \
"addcons=" \
"setenv bootargs ${bootargs} " \
"console=${consdev},${baudrate}\0" \
"addip=" \
"setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addmisc=" \
"setenv bootargs ${bootargs} ${miscargs}\0" \
"addargs=run addcons addmisc addmtd\0" \
"mmcload=" \
"mmc rescan || reset ; load mmc ${mmcdev}:${mmcpart} " \
"${kernel_addr_r} ${bootfile} || reset\0" \
"miscargs=nohlt panic=1\0" \
"mmcargs=setenv bootargs root=/dev/mmcblk0p${mmcpart} rw " \
"rootwait\0" \
"mmc_mmc=" \
"run mmcload mmcargs addargs || reset ; " \
"bootm ${kernel_addr_r} ; reset\0" \
"netload=tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
"net_nfs=" \
"run netload nfsargs addip addargs ; " \
"bootm ${kernel_addr_r}\0" \
"nfsargs=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}${hostname},v3,tcp\0" \
"try_bootscript=" \
"mmc rescan;" \
"if test -e mmc 0:1 ${bootscript} ; then " \
"if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \
"then ; " \
"echo Running bootscript... ; " \
"source ${kernel_addr_r} ; " \
"fi ; " \
"fi\0"
#endif /* __M53MENLO_CONFIG_H__ */