Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 10:18:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/colibri_imx7_emmc_defconfig

97 lines
2.4 KiB
Text
Raw Normal View History

configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_ARM=y
CONFIG_ARCH_MX7=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 17:50:32 +00:00
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x8c000000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFDE00
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
CONFIG_TARGET_COLIBRI_IMX7=y
CONFIG_TARGET_COLIBRI_IMX7_EMMC=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14 12:11:27 +00:00
CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-07 19:25:00 +00:00
CONFIG_IMX_HAB=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
# CONFIG_CMD_DEKBLOB is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
CONFIG_DEFAULT_DEVICE_TREE="imx7-colibri-emmc"
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_imx7/imximage.cfg,MX7D"
CONFIG_BOOTDELAY=1
# CONFIG_USE_BOOTCOMMAND is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-21 17:45:07 +00:00
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb"
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_BOARD_LATE_INIT=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_SYS_PROMPT="Colibri iMX7 # "
# CONFIG_CMD_BOOTD is not set
Kconfig: Migrate CONFIG_BOOTM_* options Migrate all of the existing OS support options that are under CONFIG_BOOTM_* to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-20 21:36:50 +00:00
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_ASKENV=y
CONFIG_CRC32_VERIFY=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_BMP=y
toradex: imx: enable BOOTCOUNT feature This introduces automatic boot counter that increases after every reset.After a power-on reset, it will be initialized with 1, and each reboot will increment the value by 1. By default it's disabled if bootlimit isn't set. To enable this feature you have set bootcount limit ("bootlimit"), alternate boot action ("altbootcmd") that will be performed if the new value of bootcount exceeds the value of bootlimit, and "upgrade_available" to let U-Boot automatically increase and save the counter value after every reset: > setenv bootlimit 5 > setenv upgrade_available 1 > setenv altbootcmd "bootm ..." In case the bootlimit exceeds, the message will be shown and albootcmd executed: Warning: Bootlimit (5) exceeded. Using altbootcmd. To reset bootcount run: > bootcount reset Print current value: > bootcount print Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-16 19:20:08 +00:00
CONFIG_CMD_BOOTCOUNT=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_CMD_CACHE=y
# CONFIG_CMD_HASH is not set
# CONFIG_ISO_PARTITION is not set
CONFIG_OF_CONTROL=y
Convert CONFIG_ENV_OVERWRITE to Kconfig This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-03 11:48:56 +00:00
CONFIG_ENV_OVERWRITE=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_ENV_IS_IN_MMC=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24 21:14:47 +00:00
CONFIG_SYS_MMC_ENV_PART=1
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
net: Convert CONFIG_IP_DEFRAG to Kconfig Convert CONFIG_IP_DEFRAG to Kconfig, update defconfigs, headers and whitelist. This patch is a follow-up on a patch by Christian Gmeiner with the added config/header/whitelist updates. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:14 +00:00
CONFIG_IP_DEFRAG=y
net: Convert CONFIG_TFTP_BLOCKSIZE to Kconfig Convert CONFIG_TFTP_BLOCKSIZE to Kconfig, update defconfigs, headers and whitelist. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
2019-06-11 02:51:15 +00:00
CONFIG_TFTP_BLOCKSIZE=16352
toradex: imx: enable BOOTCOUNT feature This introduces automatic boot counter that increases after every reset.After a power-on reset, it will be initialized with 1, and each reboot will increment the value by 1. By default it's disabled if bootlimit isn't set. To enable this feature you have set bootcount limit ("bootlimit"), alternate boot action ("altbootcmd") that will be performed if the new value of bootcount exceeds the value of bootlimit, and "upgrade_available" to let U-Boot automatically increase and save the counter value after every reset: > setenv bootlimit 5 > setenv upgrade_available 1 > setenv altbootcmd "bootm ..." In case the bootlimit exceeds, the message will be shown and albootcmd executed: Warning: Bootlimit (5) exceeded. Using altbootcmd. To reset bootcount run: > bootcount reset Print current value: > bootcount print Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-16 19:20:08 +00:00
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_ENV=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_FSL_CAAM=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-21 14:11:23 +00:00
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_BUF_SIZE=0x10000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek <michal.simek@xilinx.com>, these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2019-05-01 07:58:27 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
Convert CONFIG_FSL_USDHC to Kconfig This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add IMX8M, TARGET_S32V234EVB to FSL_USDHC list] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-14 12:23:43 +00:00
CONFIG_FSL_USDHC=y
mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:05 +00:00
CONFIG_MTD=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together Commit d397f7c45b0b ("net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns that you shouldn't select both of them due to a device ID clash between the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately boards like the SAMA5D3xEK do contain both types of PHY, but fortunately the Linux Micrel PHY driver provides a solution by using different PHY ID and mask values to distinguish these chips. This commit contains the following changes: - The PHY ID and mask values for the KSZ9021 and the KS8721 now match those used by the Linux driver. - The warnings about not enabling both drivers have been removed. - The description for PHY_MICREL_KSZ8XXX has been corrected (these are 10/100 PHYs, not GbE PHYs). - PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE since this is selected by PHY_MICREL_KSZ90X1. - All of the relevant defconfig files have been updated now that PHY_MICREL_KSZ8XXX does not default to 'Y'. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-03-06 12:48:27 +00:00
CONFIG_PHY_MICREL_KSZ8XXX=y
colibri_imx7: migrate to DM_ETH Migrate to DM_ETH and remove hardcoded pinmux configuration. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2019-11-04 10:12:04 +00:00
CONFIG_DM_ETH=y
CONFIG_DM_MDIO=y
CONFIG_FEC_MXC=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX7=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RN5T567=y
Convert CONFIG_MXC_UART to Kconfig This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-06-09 14:46:46 +00:00
CONFIG_MXC_UART=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_USB=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-21 14:11:23 +00:00
CONFIG_DM_USB=y
configs: add default configuraiton for Colibri iMX7 with eMMC Add a default configuration for Colibri iMX7D 1GB (with eMMC NAND flash). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2019-01-08 11:42:38 +00:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Toradex"
CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
colibri_imx7_emmc: enable DM_VIDEO Enable DM_VIDEO for Colibri iMX7 eMMC version. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2019-06-03 21:06:01 +00:00
CONFIG_DM_VIDEO=y
colibri-imx7: fix splash logo drawing 1. Configure white on black for video console. 2. Enable printing bmp logo during late board init stage. 3. Use iomux configuration from device tree. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15 10:31:05 +00:00
CONFIG_SYS_WHITE_ON_BLACK=y
Convert CONFIG_SPLASH_SCREEN et al to Kconfig This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-11 17:23:35 +00:00
CONFIG_SPLASH_SCREEN=y
CONFIG_SPLASH_SCREEN_ALIGN=y
configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-28 09:30:15 +00:00
CONFIG_VIDEO_BMP_RLE8=y
configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-28 09:30:16 +00:00
CONFIG_BMP_16BPP=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in a new issue Copy permalink