Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-16 01:38:22 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/configs/libretech_all_h3_cc_h2_plus_defconfig

17 lines
461 B
Text
Raw Normal View History

sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver. This patch adds a device tree file for the H2+ version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit afe27544125e ("sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H2+ SoC, and has only two 2Gb DDR3 chips instead of four. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-28 05:36:02 +00:00
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_SPL=y
CONFIG_MACH_SUN8I_H3=y
CONFIG_DRAM_CLK=672
CONFIG_DRAM_ZQ=3881979
CONFIG_DRAM_ODT_EN=y
sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards The Libretech ALL-H3-CC has a high density connector for attaching an eMMC module. The module form factor and connection is specific to Libretech, and has provisions for split vmmc/vqmmc (core and I/O) voltage supplies, but this board does not wire the vqmmc side. The H2+/H3/H5 SoCs do not support alternate I/O voltages for eMMC either. Only 3.3V is supported. A specific module that ties vqmmc to vmmc, with both at 3.3V, must be used. Given that a) eMMC is not designed to be hotplugged, b) power is always provided on the pins, and c) MMC controllers can deal with missing cards, we can enable this by default. If a module is attached it will be picked up by the system. The device tree change was also submitted to the Linux Kernel and has already been queued up for 4.19. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-14 13:55:45 +00:00
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
sunxi: Add Libre Computer Board ALL-H3-CC H2+ ver. This patch adds a device tree file for the H2+ version of the Libre Computer Board ALL-H3-CC. It is the same board first introduced in commit afe27544125e ("sunxi: Add support for Libre Computer Board ALL-H3-CC H3 ver."), with the H3 SoC replaced with the H2+ SoC, and has only two 2Gb DDR3 chips instead of four. The device tree utilizes the common board design file for ALL-H3-CC, providing just the model strings and SoC specifics. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-04-28 05:36:02 +00:00
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-libretech-all-h3-cc"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SUN8I_EMAC=y
CONFIG_USB_EHCI_HCD=y
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
Reference in a new issue Copy permalink