Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-15 01:17:39 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/exynos5422-odroidxu3.dts

295 lines
6.9 KiB
Text
Raw Normal View History

SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06 21:58:06 +00:00
// SPDX-License-Identifier: GPL-2.0+
Odroid-XU3: Add support for Odroid-XU3 This patch adds support for Odroid-XU3. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-12 05:45:45 +00:00
/*
* Odroid XU3 device tree source
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*/
/dts-v1/;
#include "exynos54xx.dtsi"
/ {
arm: dts: exynos: Extend board description u-boot uses the same DTS for the all Odroid XU3-based boards, so list them in the model description to let user know that those boards are supported. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-01-15 15:18:03 +00:00
model = "Odroid XU3/XU4/HC1/HC2 based on Exynos5422";
Odroid-XU3: Add support for Odroid-XU3 This patch adds support for Odroid-XU3. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-12 05:45:45 +00:00
compatible = "samsung,odroidxu3", "samsung,exynos5";
aliases {
serial0 = "/serial@12C00000";
console = "/serial@12C20000";
};
memory {
device_type = "memory";
reg = <0x40000000 0x10000000
0x50000000 0x10000000
0x60000000 0x10000000
0x70000000 0x10000000
0x80000000 0x10000000
0x90000000 0x10000000
0xa0000000 0x10000000
0xb0000000 0xea00000>;
};
Odroid-XU3: dts: enable ADC, with request for pre-reloc bind This ADC is required for Odroid's board revision detection. The pre-reloc request is enabled, since board detection will be done in one of early function call. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-27 12:08:04 +00:00
adc@12D10000 {
dm: dts: Convert driver model tags to use new schema Now that Linux has accepted these tags, move the device tree files in U-Boot over to use them. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-13 15:56:33 +00:00
bootph-all;
arm: dts: exynos: Add supply for ADC block to Odroid XU3 family The ADC block requires VDD supply to be on so provide one. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:56 +00:00
vdd-supply = <&ldo4_reg>;
Odroid-XU3: dts: enable ADC, with request for pre-reloc bind This ADC is required for Odroid's board revision detection. The pre-reloc request is enabled, since board detection will be done in one of early function call. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-27 12:08:04 +00:00
status = "okay";
};
Odroid-XU3: enable s2mps11 PMIC support Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-27 12:08:02 +00:00
i2c@12CA0000 {
s2mps11_pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
voltage-regulators {
ldo1_reg: LDO1 {
regulator-name = "vdd_ldo1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo3_reg: LDO3 {
regulator-name = "vddq_mmc0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
};
ldo4_reg: LDO4 {
regulator-name = "vdd_adc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
};
ldo5_reg: LDO5 {
regulator-name = "vdd_ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "vdd_ldo6";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo7_reg: LDO7 {
regulator-name = "vdd_ldo7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo8_reg: LDO8 {
regulator-name = "vdd_ldo8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo9_reg: LDO9 {
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "vdd_ldo12";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo13_reg: LDO13 {
regulator-name = "vddq_mmc2";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
};
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
ARM: dts: exynos: fix property values of LDO15/17 for ODROID-XU3/4 Looking at the schematic, LDO15 and LDO17 are tied as a power source of a builtin network chipset. The voltage on LDO15 is corrected to 3.3V and the name of LDO17 is corrected to "vdd_ldo17". Signed-off-by: Dongjin Kim <tobetter@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-10-29 16:39:59 +00:00
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo16_reg: LDO16 {
regulator-name = "vdd_ldo16";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo17_reg: LDO17 {
ARM: dts: exynos: fix property values of LDO15/17 for ODROID-XU3/4 Looking at the schematic, LDO15 and LDO17 are tied as a power source of a builtin network chipset. The voltage on LDO15 is corrected to 3.3V and the name of LDO17 is corrected to "vdd_ldo17". Signed-off-by: Dongjin Kim <tobetter@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-10-29 16:39:59 +00:00
regulator-name = "vdd_ldo17";
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo18_reg: LDO18 {
regulator-name = "vdd_emmc_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
};
ldo19_reg: LDO19 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
};
ldo24_reg: LDO24 {
regulator-name = "tsp_io";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
ldo26_reg: LDO26 {
regulator-name = "vdd_ldo26";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
arm: dts: exynos: Add ramp delay property to LDO regulators to Odroid XU3 family Add startup time to LDO regulators of S2MPS11 PMIC on Odroid XU3/XU4/HC1 family of boards to be sure the voltage is proper before relying on the regulator. The datasheet for all the S2MPS1x family is inconsistent here and does not specify unambiguously the value of ramp delay for LDO. It mentions 30 mV/us in one timing diagram but then omits it completely in LDO regulator characteristics table (it is specified for bucks). However the vendor kernels for Galaxy S5 and Odroid XU3 use values of 12 mV/us or 24 mV/us. Without the ramp delay value the consumers do not wait for voltage settle after changing it. Although the proper value of ramp delay for LDOs is unknown, it seems safer to use at least some value from reference kernel than to leave it unset. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-03-06 18:37:57 +00:00
regulator-ramp-delay = <12000>;
ARM: dts: exynos5422-odroidxu3: add the LDO's nodes Add the LDO's nodes that taken from Linux Kernel. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-05-30 06:07:28 +00:00
regulator-always-on;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck5_reg: BUCK5 {
regulator-name = "vdd_mem";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
};
buck6_reg: BUCK6 {
regulator-name = "vdd_kfc";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck7_reg: BUCK7 {
regulator-name = "vdd_1.0v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck8_reg: BUCK8 {
regulator-name = "vdd_1.8v_ldo";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck9_reg: BUCK9 {
regulator-name = "vdd_2.8v_ldo";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3750000>;
regulator-always-on;
regulator-boot-on;
};
buck10_reg: BUCK10 {
regulator-name = "vdd_vmem";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
regulator-boot-on;
};
};
Odroid-XU3: enable s2mps11 PMIC support Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-10-27 12:08:02 +00:00
};
};
odroid-XU3: Add entry for DTS EHCI GPIO Add samsung,vbus-gpio information for the XU3. This allows the usage of the EHCI controller on the XU3, which is connected to the SMSC LAN9514 chip (usb hub + network). Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-05 20:26:10 +00:00
ehci@12110000 {
dm: exynos: dts: Use GPIO bank phandles for GPIOs U-Boot now supports using GPIOs using bank phandles instead of global numbers. Update the exynos device tree files to use this. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2015-01-06 03:05:42 +00:00
samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
odroid-XU3: Add entry for DTS EHCI GPIO Add samsung,vbus-gpio information for the XU3. This allows the usage of the EHCI controller on the XU3, which is connected to the SMSC LAN9514 chip (usb hub + network). Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-05 20:26:10 +00:00
};
Odroid-XU3: Add support for Odroid-XU3 This patch adds support for Odroid-XU3. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-12 05:45:45 +00:00
serial@12C20000 {
arm: dts: exynos: Adjust whitespace around status property Just add spaces around '=' sign for clarity. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-02-21 16:32:00 +00:00
status = "okay";
Odroid-XU3: Add support for Odroid-XU3 This patch adds support for Odroid-XU3. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-12 05:45:45 +00:00
};
mmc@12200000 {
fifoth_val = <0x201f0020>;
};
mmc@12220000 {
fifoth_val = <0x201f0020>;
};
Odroid-XU3: Add eMMC-reset node on DT This needs for special handling of nRESET_OUT line(GPD1-0 gpio) for eMMC memory to perform complete reboot on Odroid XU3 board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-01-15 02:45:58 +00:00
emmc-reset {
compatible = "samsung,emmc-reset";
reset-gpio = <&gpd1 0 0>;
};
Odroid-XU3: Add support for Odroid-XU3 This patch adds support for Odroid-XU3. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-12-12 05:45:45 +00:00
};
Reference in a new issue Copy permalink