u-boot/arch/mips/mach-mtmips/mt7621/spl/launch_ll.S

340 lines
6.6 KiB
ArmAsm
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 MediaTek Inc. All rights reserved.
*
* Author: Weijie Gao <weijie.gao@mediatek.com>
*/
#include <asm/cm.h>
#include <asm/asm.h>
#include <asm/regdef.h>
#include <asm/cacheops.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/mipsmtregs.h>
#include "launch.h"
.macro cache_loop curr, end, line_sz, op
10: cache \op, 0(\curr)
PTR_ADDU \curr, \curr, \line_sz
bne \curr, \end, 10b
.endm
.set mt
/*
* Join the coherent domain
* a0 = number of cores
*/
LEAF(join_coherent_domain)
/*
* Enable coherence and allow interventions from all other cores.
* (Write access enabled via GCR_ACCESS by core 0.)
*/
li t1, 1
sll t1, a0
addiu t1, -1
li t0, KSEG1ADDR(CONFIG_MIPS_CM_BASE)
sw t1, GCR_Cx_COHERENCE(t0)
ehb
move t2, zero
_next_coherent_core:
sll t1, t2, GCR_Cx_OTHER_CORENUM_SHIFT
sw t1, GCR_Cx_OTHER(t0)
_busy_wait_coherent_core:
lw t1, GCR_CO_COHERENCE(t0)
beqz t1, _busy_wait_coherent_core
addiu t2, 1
bne t2, a0, _next_coherent_core
jr ra
END(join_coherent_domain)
/*
* All VPEs other than VPE0 will go here.
*/
LEAF(launch_vpe_entry)
mfc0 t0, CP0_EBASE
and t0, t0, MIPS_EBASE_CPUNUM
/* per-VPE cpulaunch_t */
li a0, KSEG0ADDR(CPULAUNCH)
sll t1, t0, LOG2CPULAUNCH
addu a0, t1
/* Set CPU online flag */
li t0, LAUNCH_FREADY
sw t0, LAUNCH_FLAGS(a0)
/* Enable count interrupt in mask, but do not enable interrupts */
mfc0 t0, CP0_STATUS
ori t0, STATUSF_IP7
mtc0 t0, CP0_STATUS
/* VPEs executing in wait code do not need a stack */
li t9, KSEG0ADDR(LAUNCH_WAITCODE)
jr t9
END(launch_vpe_entry)
/*
* This function will not be executed in place.
* It will be copied into memory, and VPEs other than VPE0 will be
* started to run into this in-memory function.
*/
LEAF(launch_wait_code)
.globl launch_wait_code_start
launch_wait_code_start:
move t0, a0
start_poll:
/* Poll CPU go flag */
mtc0 zero, CP0_COUNT
li t1, LAUNCHPERIOD
mtc0 t1, CP0_COMPARE
time_wait:
/* Software wait */
mfc0 t2, CP0_COUNT
subu t2, t1
bltz t2, time_wait
/* Check the launch flag */
lw t3, LAUNCH_FLAGS(t0)
and t3, LAUNCH_FGO
beqz t3, start_poll
/* Reset the counter and interrupts to give naive clients a chance */
mfc0 t1, CP0_STATUS
ins t1, zero, STATUSB_IP7, 1
mtc0 t1, CP0_STATUS
mfc0 t1, CP0_COUNT
subu t1, 1
mtc0 t1, CP0_COMPARE
/* Jump to kernel */
lw t9, LAUNCH_PC(t0)
lw gp, LAUNCH_GP(t0)
lw sp, LAUNCH_SP(t0)
lw a0, LAUNCH_A0(t0)
move a1, zero
move a2, zero
move a3, zero
ori t3, LAUNCH_FGONE
sw t3, LAUNCH_FLAGS(t0)
jr t9
.globl launch_wait_code_end
launch_wait_code_end:
END(launch_wait_code)
/*
* Core1 will go here.
*/
LEAF(launch_core_entry)
/* Disable caches */
bal mips_cache_disable
/* Initialize L1 cache only */
li a0, CONFIG_SYS_ICACHE_SIZE
li a1, CONFIG_SYS_ICACHE_LINE_SIZE
li a2, CONFIG_SYS_DCACHE_SIZE
li a3, CONFIG_SYS_DCACHE_LINE_SIZE
mtc0 zero, CP0_TAGLO
mtc0 zero, CP0_TAGLO, 2
ehb
/*
* Initialize the I-cache first,
*/
li t0, KSEG0
addu t1, t0, a0
/* clear tag to invalidate */
cache_loop t0, t1, a1, INDEX_STORE_TAG_I
#ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
/* fill once, so data field parity is correct */
PTR_LI t0, KSEG0
cache_loop t0, t1, a1, FILL
/* invalidate again - prudent but not strictly necessary */
PTR_LI t0, KSEG0
cache_loop t0, t1, a1, INDEX_STORE_TAG_I
#endif
/*
* then initialize D-cache.
*/
PTR_LI t0, KSEG0
PTR_ADDU t1, t0, a2
/* clear all tags */
cache_loop t0, t1, a3, INDEX_STORE_TAG_D
#ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
/* load from each line (in cached space) */
PTR_LI t0, KSEG0
2: LONG_L zero, 0(t0)
PTR_ADDU t0, a3
bne t0, t1, 2b
/* clear all tags */
PTR_LI t0, KSEG0
cache_loop t0, t1, a3, INDEX_STORE_TAG_D
#endif
/* Set Cache Mode */
mfc0 t0, CP0_CONFIG
li t1, CONF_CM_CACHABLE_COW
ins t0, t1, 0, 3
mtc0 t0, CP0_CONFIG
/* Join the coherent domain */
li a0, 2
bal join_coherent_domain
/* Bootup Core0/VPE1 */
bal boot_vpe1
b launch_vpe_entry
END(launch_core_entry)
/*
* Bootup VPE1.
* This subroutine must be executed from VPE0 with VPECONF0[MVP] already set.
*/
LEAF(boot_vpe1)
mfc0 t0, CP0_MVPCONF0
/* a0 = number of TCs - 1 */
ext a0, t0, MVPCONF0_PTC_SHIFT, 8
beqz a0, _vpe1_init_done
/* a1 = number of VPEs - 1 */
ext a1, t0, MVPCONF0_PVPE_SHIFT, 4
beqz a1, _vpe1_init_done
/* a2 = current TC No. */
move a2, zero
/* Enter VPE Configuration State */
mfc0 t0, CP0_MVPCONTROL
or t0, MVPCONTROL_VPC
mtc0 t0, CP0_MVPCONTROL
ehb
_next_tc:
/* Set the TC number to be used on MTTR and MFTR instructions */
mfc0 t0, CP0_VPECONTROL
ins t0, a2, 0, 8
mtc0 t0, CP0_VPECONTROL
ehb
/* TC0 is already bound */
beqz a2, _next_vpe
/* Halt current TC */
li t0, TCHALT_H
mttc0 t0, CP0_TCHALT
ehb
/* If there is spare TC, bind it to the last VPE (VPE[a1]) */
slt t1, a1, a2
bnez t1, _vpe_bind_tc
move t1, a1
/* Set Exclusive TC for active TC */
mftc0 t0, CP0_VPECONF0
ins t0, a2, VPECONF0_XTC_SHIFT, 8
mttc0 t0, CP0_VPECONF0
move t1, a2
_vpe_bind_tc:
/* Bind TC to a VPE */
mftc0 t0, CP0_TCBIND
ins t0, t1, TCBIND_CURVPE_SHIFT, 4
mttc0 t0, CP0_TCBIND
/*
* Set up CP0_TCSTATUS register:
* Disable Coprocessor Usable bits
* Disable MDMX/DSP ASE
* Clear Dirty TC
* not dynamically allocatable
* not allocated
* Kernel mode
* interrupt exempt
* ASID 0
*/
li t0, TCSTATUS_IXMT
mttc0 t0, CP0_TCSTATUS
_next_vpe:
slt t1, a1, a2
bnez t1, _done_vpe # No more VPEs
/* Disable TC multi-threading */
mftc0 t0, CP0_VPECONTROL
ins t0, zero, VPECONTROL_TE_SHIFT, 1
mttc0 t0, CP0_VPECONTROL
/* Skip following configuration for TC0 */
beqz a2, _done_vpe
/* Deactivate VPE, set Master VPE */
mftc0 t0, CP0_VPECONF0
ins t0, zero, VPECONF0_VPA_SHIFT, 1
or t0, VPECONF0_MVP
mttc0 t0, CP0_VPECONF0
mfc0 t0, CP0_STATUS
mttc0 t0, CP0_STATUS
mttc0 zero, CP0_EPC
mttc0 zero, CP0_CAUSE
mfc0 t0, CP0_CONFIG
mttc0 t0, CP0_CONFIG
/*
* VPE1 of each core can execute cached as its L1 I$ has already
* been initialized.
* and the L2$ has been initialized or "disabled" via CCA override.
*/
PTR_LA t0, _start
mttc0 t0, CP0_TCRESTART
/* Unset Interrupt Exempt, set Activate Thread */
mftc0 t0, CP0_TCSTATUS
ins t0, zero, TCSTATUS_IXMT_SHIFT, 1
ori t0, TCSTATUS_A
mttc0 t0, CP0_TCSTATUS
/* Resume TC */
mttc0 zero, CP0_TCHALT
/* Activate VPE */
mftc0 t0, CP0_VPECONF0
ori t0, VPECONF0_VPA
mttc0 t0, CP0_VPECONF0
_done_vpe:
addu a2, 1
sltu t0, a0, a2
beqz t0, _next_tc
mfc0 t0, CP0_MVPCONTROL
/* Enable all activated VPE to execute */
ori t0, MVPCONTROL_EVP
/* Exit VPE Configuration State */
ins t0, zero, MVPCONTROL_VPC_SHIFT, 1
mtc0 t0, CP0_MVPCONTROL
ehb
_vpe1_init_done:
jr ra
END(boot_vpe1)